• Tribology and Lubricants
• /
• 제13권2호
• /
• pp.96-104
• /
• 1997

This paper was focused on the wear characteristics of ion-nitrided metal and with ion-nitride processing, which is basically concerned with the effects of carbon content in workpiece and added carbon content gas atmosphere on the best wear performance. Increased carbon content in workpiece increases compound layer thickness, but decreases diffusion layer thickness. On the other hand, a small optimal amount of carbon content in gas atmosphere increase compound layer thickness as well as diffusion layer thickness and hardness. Wear tests show that the compound layer of ion-nitrided metal reduces wear rate when the applied wear load is small. However, as the load becomes large, the existence of compound layer tends to increase wear rate. Compressive residual stress at the compound layer is the largest at the compound layer, and decreases as the depth from the surface increases. It is found in the analysis that under small applied load, the critical depth where voids and cracks may be created and propagated is located at the compound layer, so that the adhesive wear is created and the existence of compound layer reduces the amount of wear. When the load becomes large, the critical depth is located below the compound layer and delamination, which may explained by surface deformation, crack nucleation and propagation, is created and the existence of compound layer increases wear rate. For the compound layer, at added carbon contents of 0 percent and 0.5 at. percent, the $\varepsilon$ monophase is predominant. But at 0.7 at. percent added carbon, the $\varepsilon$ monophase formation tends to be severely inhibited and r' and $Fe_3C$ polyphase formation becomes dominant. This increased hard $\varepsilon$ phase layer was observed to be more beneficial in reducing friction and wear.

• Journal of Microbiology and Biotechnology
• /
• 제27권6호
• /
• pp.1065-1070
• /
• 2017

This study aimed to examine the anti-candidal efficacy of a novel ketone derivative isolated from Diaporthe sp. ED2, an endophytic fungus residing in medicinal herb Orthosiphon stamieus Benth. The ethyl acetate extract of the fungal culture was separated by open column and reverse phase high-performance liquid chromatography (HPLC). The eluent at retention time 5.64 min in the HPLC system was the only compound that exhibited anti-candidal activity on Kirby-Bauer assay. The structure of the compound was also elucidated by nuclear magnetic resonance and spectroscopy techniques. The purified anti-candidal compound was obtained as a colorless solid and characterized as 3-hydroxy-5-methoxyhex-5-ene-2,4-dione. On broth microdilution assay, the compound also exhibited fungicidal activity on a clinical strain of Candida albicans at a minimal inhibitory concentration of $3.1{\mu}g/ml$. The killing kinetic analysis also revealed that the compound was fungicidal against C. albicans in a concentration- and time-dependent manner. The compound was heat-stable up to $70^{\circ}C$, but its anti-candidal activity was affected at pH 2.

• 한국표면공학회지
• /
• 제20권4호
• /
• pp.144-153
• /
• 1987

In the case of dipping the Ni-Resist cast iron into molten aluminum with iron content, the thickness of intermetallic compound was remarkably increased with increasing iron content. The thickness was shown by following equation in the range of 1-3% iron content; $x=22.5t^{1/2}+4.47{\cdot}t{\cdot}(Fe%)$. where, x is thickness(${\mu}m$), t the time (minute), Fe% the iron w/o. When the Ni-Resist cast iron was dipped into the molten aluminum containing zinc content, the intermetallic compound thickness was also increased with increasing zinc contents. And thickness was represented by the following equation in the range of 2-10% zinc content; $x=3.46t^{1/2}+0.27{\cdot}t{\cdot}(Zn%)$. However, in the case of dipping the Ni-resist cast iron into molten aluminum with silicon content, the thickness of intermetallic compound was decreased with increasing silicon content, as shown in the following equation; $x=7.17t^{1/2}-0.15{\cdot}t{\cdot}(Si%)$. The intermetallic compound formed onto Ni-Resist cast iron was identified to be $FeAl_3\;and\;Fe_3Al$. As the result of hardness measurement, the peak hardness appeared in the intermetallic compound at near interface of the cast iron and the compound.

• 약학회지
• /
• 제31권1호
• /
• pp.19-24
• /
• 1987

In order to find out the pharmacologically active but less toxic compounds than piperine, the actions of several amide derivatives of 5-phenyl-2, 4-pentadienoic acid on the CNS depressant activities were examined. The nine amide derivatives were investigated by using ICR mice as an experimental amimals on acute toxicities, anticonvulsant, sedative, analgesic and antipyretic effects. In the case of acute toxicities, all derivatives were weaker than piperine except compound III. Compound I showed strong anticonvulsant activity. On the other hand, compound I, III and IV significantly prolonged the sleeping time induced by hexobarbital in mice. Compound I, III and IV exhibited better analgesic effect than aspirin while compound II, V, VII and IX showed similar antipyretic activity to aspirin.

• Journal of Microbiology and Biotechnology
• /
• 제27권11호
• /
• pp.2070-2073
• /
• 2017

We have discovered a novel chemical compound, (E)-3-(furan-2-yl)-N-(4-sulfamoylphenyl) acrylamide, that suppresses the enzymatic activities of SARS coronavirus helicase. To determine the inhibitory effect, ATP hydrolysis and double-stranded DNA unwinding assays were performed in the presence of various concentrations of the compound. Through these assays, we obtained $IC_{50}$ values of $2.09{\pm}0.30{\mu}M$ (ATP hydrolysis) and $13.2{\pm}0.9{\mu}M$ (DNA unwinding), respectively. Moreover, we found that the compound did not have any significant cytotoxicity when $40{\mu}M$ of it was used. Our results showed that the compound might be useful to be developed as an inhibitor against SARS coronavirus.

• 한국환경과학회지
• /
• 제11권2호
• /
• pp.131-137
• /
• 2002

The chemical behavior and properties on the redox state of environmental pollutant has been investigated by electrochemical methods. We carried out to measure the variations in the redox reaction of differential pulse polarogram and cyclic voltammogram. The results observed the influences on redox potential and current of various factors with temperature and pH. These were established factors as the effect of the redox reaction. It can be clearly recognized that the electrode reaction are from qusi-reversible to irreversible processes. Also, it was mixing with reaction current controlled. The bits-phenol A in the waste water was made to compound with cobalt ion and it take away from the separation into compound. The $Co(BPA)_2$ compound was not found to be dissociation in waste water. However, this compound is avery unstable(K=1.02) and for a while, it was to be a dissociation. Therefore, we believed that it was likely to a toxic substance.

• Mass Spectrometry Letters
• /
• 제14권3호
• /
• pp.110-115
• /
• 2023

The reaction of (COD)PdCl₂ with new C₃-symmetric tridentate L (COD = 1,5-cyclooctadien; L = 1,3,5-tris(picolinoyloxyethyl)cyanurate) in a mixture of acetone and dichloromethane produces single crystals consisting of unprecedented monometallacyclic [PdCl₂(L)]. This cyclic compound arises from trans-chelation of two of three donating pyridyl groups of L, while the third pyridyl group remains uncoordinated. Electrospray ionization mass spectrometry (ESI-MS) data on L exhibited the major peak corresponding to [C₂₇H₂₄N₆O₉ + H⁺]⁺. Fast atom bombardment mass spectrometry (FABMS) data on [PdCl₂(L)], however, showed the mass peak corresponding to the L instead of the present palladium(II) compound species, due to the insolubility and dissociation in solution. The physicochemical properties of the present palladium(II) compound were fully characterized by means of infrared (IR) and nuclear magnetic resonance (NMR) spectroscopy, thermal analysis, single-crystal X-ray diffraction (SC-XRD) measurement.

• 통합자연과학논문집
• /
• 제9권4호
• /
• pp.261-267
• /
• 2016

The crystal structure of the saliciline derivatives 4-chloro-2{[(2-hydroxy-5-methylphenyl)amino]methyl}5-methylphenol ($C_{15}H_{15}ClNO_2$) has been determined from single crystal X-ray diffraction data. In the title compound crystallizes in the monoclinic space group P21/c with unit cell dimension $a=11.5241(2){\AA}$, $b=8.733(2){\AA}$ and $c=13.649(2){\AA}$ [${\alpha}=90^{\circ}$, ${\beta}=130.876(2)^{\circ}$ and ${\gamma}=90^{\circ}$]. the title compound are essentially planar conformation. The compound lies across a crystallographic inversion centre and adopts E configurations with respect to the C-N bonds. The crystal packing of the molecules of compound is stabilized through weak O-H...O inter molecular interactions.

• 약학회지
• /
• 제45권6호
• /
• pp.582-587
• /
• 2001

(S)-5-iodo-2-aminoindan.HCI (7) was synthesized for developing a serotonergic agent. (S)- Phenylalanine was protected with trifuoroacetyl group and compound 2 was prepared by direct iodination in acetic acid and in the presence of I$_2$, KIO$_4$, and sulfuric acid. Compound 3 was cyclized by Friedel-Crafts reaction and reduced with NaBH$_4$ to form 5-iodo-2-(N-trifluoroacetyl)aminoindan-1-ol (4) . This compound was reduced to indan derivative 5 using the triethylsilane and BF$_3$ . Et$_2$O. It was basified with $K_2$CO$_3$ solution and treated with saturated HCl in ethyl ether to isolate compound 7.

• 약학회지
• /
• 제47권1호
• /
• pp.1-4
• /
• 2003

In order to search the new serotonin bioisoster, 2-(5,6-dimethoxy-l-indenyl)ethyl amine(1) was synthesized. 3,4-Dimethoxybenzaldehyde, as starting material, was condensed with malonic acid in the presence of pyridine and piperidine to form 3,4-dimethoxycinnamic acid(2). Compound 2 was performed catalytic hydrogenation with 10％ Pd-C to give propanoic acid derivative 3, which was cyclized by Friedel-Crafts acylation to afford 5,6-dimethoxyindan-l-one(4). Compound 4 was reduced with NaBH$_4$ in ethanol to obtain l-indanol 5, and it was dehydrated to give 5,6-dimethoxy-l-indene(6). This compound was lithiated with 2.5M n-butyllithium and reacted with 1,2-dibromoethane to give 2-(5,6-dimethoxy-l-indenyl)ethyl bromide(7), and which was treated with anhydrous ammonia to synthesize compound 1.