• Journal of Microbiology and Biotechnology
• /
• v.31 no.12
• /
• pp.1667-1671
• /
• 2021

A new homocysteine thiolactone derivative, thiolactomide (1), was isolated along with a known compound, N-acetyl homocysteine thiolactone (2), from a culture extract of soil-derived Streptomyces sp. RK88-1441. The structures of these compounds were elucidated by detailed NMR and MS spectroscopic analyses with literature study. In addition, biological evaluation studies revealed that compounds 1 and 2 both exert neuroprotective activity against 6-hydroxydopamine (6-OHDA)-mediated neurotoxicity by blocking the generation of hydrogen peroxide in neuroblastoma SH-SY5Y cells.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.469-476
• /
• 2002

Photocrosslinkable soluble polyimide and polymethacrylate compound were synthesized for studying the optically induced anisotropy of the thin films. Chalcone group was introduced into the side chain unit of two polymers. We observed a photodimerization behavior between the double bonds in the chalcone group and an optical anisotropy of these materials by irradiation of a linearly polarized UV light (LPL). Optical anisotropy of the thin film was also investigated by using polarized UV absorption spectroscopy. The dynamic property of optical anisotropy in photoreactive polyimide was compared to that in polymethacrylate containing chalcone group in the side chain.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.43-43
• /
• 1993

Robinson annotation과 입체선택적 alkylation으로 새로운 pimarane diterpene 의 A,B-ring system을 합성한 후 cyclohexane의 allylation과 Claisen 전위를 이용하여 4급탄소 unit를 얻고 Mcurry coupling 반응으로 C-ring을 도입함으로써 새로운 pimarane diterpene을 전합성하였다. 전합성 중에 개발된 방법들을 이용하여 기본 골격들을 합성한 후 효능 검색하여 구조-활성관계를 확립하고 lead compound를 유도해 내었다.

• Mycobiology
• /
• v.39 no.2
• /
• pp.103-108
• /
• 2011

Amylases and cellulases are important enzymes that can be utilized for various biological activities. Ten different wild Nigerian mushrooms (Agaricus blazei, Agaricus sp., Corilopsis occidentalis, Coriolus versicolor, Termitomyces clypeatus, Termitomyces globulus, Pleurotus tuber-regium, Podoscypha bolleana, Pogonomyces hydnoides, and Nothopanus hygrophanus) were assayed for production of these secondary metabolites. The results revealed that most of the tested wild fungi demonstrated very good amylase and cellulase activities. With the incorporation of carboxymethyl-cellulose (a carbon source) into the culture medium, Agaricus blazei had the highest amylolytic activity of 0.60 unit/mL (at $25^{\circ}C$, pH 6.8). This was followed in order by P. tuber-regium and Agaricus sp. with 0.42 and 0.39 unit/mL, respectively ($p {\leq} 0.05$). Maltose and sucrose supplementation into the submerged liquid medium made N. hygrophanus and P. hydnoides to exhibit very low amylase activities of 0.09 and 0.11 unit/mL, respectively. Introducing peptone (an organic nitrogen source) into the basal medium enhanced the ability of C. versicolor to produce a cellulase value of 0.74 unit/mL. Other organic nitrogen sources that supported good cellulase activities were yeast extract and urea. Sodium nitrate (inorganic nitrogen source) generally inhibited cellulase production in all mushrooms. The best carbon source was carboxymethyl-cellulose, which promoted very high cellulase activity of 0.67 unit/mL in C. versicolor, which was followed in order by P. tuber-regium, T. chypeatus, and C. occidentalis ($p {\leq} 0.05$). Sucrose was the poorest carbon compound, supporting the lowest values of 0.01, 0.01, and 0.14 unit/mL in P. hydnoides, A. blazei, and Agaricus sp., respectively.

• Elastomers and Composites
• /
• v.35 no.1
• /
• pp.12-18
• /
• 2000

With growing concerns of environment and due to strengthening the government regulations on volatile organic compounds(VOC) the coatings industries are developing new technologies to reduce the amount of VOC released from coatings. In this study. a water soluble curing agent of amino-epoxy adduct was synthesized and its structure was identified by FT-IR, GPC and TG/DTA. The mechanical properties of the new curing agent in combination of KER-828 and KER-500 were investigated respectively. As an experimental result, the drying time of KER-828 was faster than that of KER-500 but the adhesion and impact strength of KER-500 was better than that of KER-828.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.6 s.171
• /
• pp.144-151
• /
• 2005

Spin coater is regarded as a major module rotating at high speed to be used build up polymer resin thin film layer fur bonding process of GaAs wafer. This module is consisted of spin unit for spreading uniformly, align device, resin spreading nozzle and et. al. Specially, spin unit which is a component of module can cause to vibrate and finally affect to the uniformity of polymer resin film layer. For the stability prediction of rotation velocity and uniformity of polymer resin film layer, it is very important to understand the dynamic characteristics of assembled spin coater module and the dynamic response mode resulted from rotation behavior of spin chuck. In this paper, stress concentration mode and the deformed shape of spin chuck generated due to angular acceleration process are presented using analytical method for evaluation of structural safety according to the revolution speed variation of spin unit. And also, deformation form of GaAs wafer due to dynamic behavior of spin chuck is presented fur the comparison of former simulated results.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.664-664
• /
• 2001

The mechanical alloying (MA) effect in $\sigma$-VFe intermetallic compound was studied by neutron and X-ray diffraction. The structure of MA $\sigma$-VFe powders were characterized by the X- ray diffraction with Cu- $K\alpha$ radiation and neutron diffraction with monochromatic neutrons of $1.835\AA$ using a high resolution powder diffractometer (HRPD). Mechanical alloying of $\sigma$-VFe compound gives rise to a dramatic structural change. After 60 hours of MA, the Fe-Fe distribution of the $\sigma$- phase VFe tetragonal structure with 30 atoms in a unit cell is found to change into that of the $\sigma$-(V,Fe) solid solution with bcc structure, which is a stable phase at elevated temperature above $1200^{\circ}C$. A comparison of X-ray diffraction data for the $\alpha$-phase has been also made with the corresponding neutron diffraction data. The (101) and (111) diffraction peaks of the $\sigma$-phase was clearly observed only in neutron diffraction pattern, which is believed to be a characteristic feature due to the chemical atomic ordering of $\sigma$- VFe phase.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.4
• /
• pp.59-63
• /
• 2013

In this paper, the impact of the copper densities of substrate layers on IC package warpage is studied experimentally and numerically. The substrate strips used in this study contained two metal layers, with the metal densities and patterns of these two layers varied to determine their impacts. Eight legs of substrate strips were prepared. Leg 1 to leg 5 were prepared with a HD (high density) type of strip and leg 6 to leg 8 were prepared with UHD (ultra high density) type of strip. The top copper metal layer was designed to feature meshed patterns and the bottom copper layer was designed to feature circular patterns. In order to consider the process factors, the warpage of the substrate bottom was measured step by step with the following manufacturing process: (a) bare substrate, (b) die attach, (c) applying mold compound (d) and post reflow. Furthermore, after the post reflow step, the substrate strips were diced to obtain unit packages and the warpage of the unit packages was measured to check the warpage trends and differences. The experimental results showed that the warpage trend is related to the copper densities. In addition to the experiments, a Finite Element Modeling (FEM) was used to simulate the warpage. The nonlinear material properties of mold compound, die attach, solder mask, and substrate core were included in the simulation. Through experiment and simulation, some observations were concluded.

• Journal of Digital Contents Society
• /
• v.17 no.3
• /
• pp.203-210
• /
• 2016

Korean is free of omission of sentence elements and modifying scope, so managing it on morphological analyzer is better than parser. In this paper, we propose functional expansion methods of the morphological analyzer to ease the burden of parsing. This method is a longest phrase matching method. When the series of several morpheme have one syntax category by processing of Unknown-words, Compound verbs, Compound nouns, Numbers and Symbols, our method combines them into a syntactic unit. And then, it is to treat by giving them a semantic features as syntax unit. The proposed morphological analysis method removes unnecessary morphological ambiguities and deceases results of morphological analysis, so improves accuracy of tagger and parser. By empirical results, we found that our method deceases 73.4% of Parsing tree and 52.4% of parsing time on average.

• Journal of the Korean housing association
• /
• v.25 no.4
• /
• pp.39-46
• /
• 2014

This research was for the investigation and analysis of the illustration of modular construction application which is different use by each school facility since modular construction related examples are rare in domestic situation, and it has a limitation because of its being basic research material for generating the basic form of modular construction. The research results are as followings. First, in case of school facility from illustration investigation results, module measurement of class modulation is as similar as $3m{\times}10m$, but in resident facility the planning of more flexible plane shape can be possible since modules of 6 cases are free and various, and facade form of various types can be appeared by combination of module unit. Second, as a result of the generated characteristics in compared analysis of representative examples, school facilities were highly indicated for movability and duration reduction areas, and the flexibility, economic efficiency, and environment-friendliness was indicated low relatively. Third, the basic planning types of modular construction can be largely divided into layered type, horizontal (straightway) type, and compound type. The layered type has a short traffic line and facility system and is appropriate for the low-rise form unless separate construction method is used since it is susceptible to load. The horizontal type is advantageous for securing an opening since it has wide extent in light but has a long traffic line and facility system. Finally, the compound type can be possible for planning of various forms but needs the combination of various unit modules and traffic line and facility plan for it can be difficult.