• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.983-989
• /
• 2008

Two flavonoids, isorhamnetin 3-O-$\beta$-D-glucopyranoside (1) and quercetin 3-O-$\beta$-D-glucopyranoside (2), from slander glasswort (Salicornia herbacea, Korean name hamcho) were isolated. Antioxidative and matrix metalloproteinase-9(MMP-9) inhibitory effects of these compounds were investigated in HT 1080 cell lines. These compounds suppressed the electron spin resonance (ESR) signal intensity on generation of 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical in a free-cellular system. Their scavenging effects on generation of intercellular reactive oxygen species (ROS) also exhibited similar trends with DPPH radical in the free cellular system. Also, a control group combined only with Fe(II)-$H_{2}O_2$ resulted in DNA apoptosis by oxidative stress, whereas treatments with these compounds suppressed radical-mediated DNA damage. Intracellular glutathione (GSH) levels were slightly increased in the presence of compound 1 and 2. Moreover, these compounds led to the reduction of the expression levels of MMP-9 without cytotoxic influence. These results suggest that these compounds have a potential as a valuable natural antioxidant and MMP inhibitor related to oxidative stress. Therefore, these compounds not only can be developed as a candidate for a therapeutic potential but also a source for use as ingredients of health foods or functional foods to prevent metastasis involving MMP-9, closely related to ROS.

• Biomolecules & Therapeutics
• /
• v.18 no.3
• /
• pp.300-307
• /
• 2010

Photosensitized peroxidation of membrane lipids has been implicated in skin pathologies such as phototoxicity and premature aging. We have previously reported that syriacusin compounds isolated from Hibiscus Syriacus inhibited lipid peroxidation. Here, we investigated whether syriacusins could be effective inhibitor to skin aging using ultraviolet-irradiated human dermal fibroblast cells (HDFCs). Syriacusins A, B, and C inhibit the activity of human neutrophil elastase (HNE), a serine protease to degrade extracellular matrix (ECM) proteins including elastin, with $IC_{50}s$ of 8.0, 5.2, and $6.1\;{\mu}M$, respectively. No changes in cell viability were detected by syriacusins A and B in UV-B ($10\;mJ/cm^2$) irradiated HDFCs. Matrix metallo-proteinase (MMP)-1 expression in HDFCs was increased by UV-B irradiation. MMP-1 expression in UV-B irradiated HDFCs was decreased by $10\;{\mu}M$ and $20\;{\mu}M$ syriacusin A to 50% and 20% of untreated control, respectively. Syriacusin B treated with $20\;{\mu}M$ reduced MMP-1 expression in UV-B irradiated HDFCs to 60% of untreated control. Syriacusin A also inhibited MMP-2 expression accompanying the increase of type-I pro-collagen in UV-B irradiated HDFCs. These results demonstrate that syriacusin A could be a more effective compound to inhibit skin aging caused by UV irradiation. It suggests that syriacusins A and B might be developed as possible agents to treat or prevent skin aging.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.2
• /
• pp.62-67
• /
• 2008

An Organometallic compound, $C_{12}H_{20}B_{10}S_2Co_2$, was synthesized from o-carborane, $Cp^*Co(S_2B_2B_{10}H_{10})$ and $BH_3{\cdot}THF$. The molecular structure of this complex has been determined by X-ray diffraction. Crystallographic data: monoclinic, space group Cc, a=15.981(4) ${\AA}$, b=15.478(17) ${\AA}$, c=12.0562(17) ${\AA}$, ${\beta}=115.063(16)^{\circ}$, Z=4, V=9683(4) ${\AA}^3$. The structure was solved by direct methods and refined by full-matrix leat-squares methods to give a model with a reliability factor R = 0.0630 for 9948 reflections.

• Nutrition Research and Practice
• /
• v.12 no.1
• /
• pp.29-40
• /
• 2018

BACKGROUND/OBJECTIVES: Ultraviolet radiation (UV) is a major cause of skin photoaging. Previous studies reported that ethanol extract (PET) of Prunus persica (L.) Batsch flowers (PPF, peach flowers) and its subfractions, particularly the ethylacetate (PEA) and n-butanol extracts (PBT), have potent antioxidant activity and attenuate the UV-induced matrix metalloproteinase (MMP) expression in human skin cells. In this study, we investigated the protective activity of PPF extract against UV-induced photoaging in a mouse model. MATERIALS/METHODS: Hairless mice were treated with PET or a mixture of PEA and PBT either topically or orally along with UV irradiation. Histological changes and biochemical alterations of mouse skin were examined. Major phenolic compounds in PPF extract were analyzed using an ACQUITY UPLC system. RESULTS: The overall effects of topical and oral treatments with PPF extract on the UV-induced skin responses exhibited similar patterns. In both experiments, the mixture of PEA and PBT significantly inhibited the UV-induced skin and epidermal thickening, while PET inhibited only the UV-induced epidermal thickening. Treatment of PET or the mixture of PEA and PBT significantly inhibited the UV-induced MMP-13 expression, but not type I collagen expression. Topical treatment of the mixture of PEA and PBT with UV irradiation significantly elevated catalase, superoxide dismutase (SOD) and glutathione-peroxidase (GPx) activities in the skin compared to those in the UV irradiated control group, while oral treatment of the mixture of PEA and PBT or PET elevated only catalase and SOD activities, but not GPx. Thirteen phytochemical compounds including 4-O-caffeoylquinic acid, cimicifugic acid E and B, quercetin-3-O-rhamnoside and kaempferol glycoside derivatives were identified in the PPF extract. CONCLUSIONS: These results demonstrate that treatment with PET or the mixture of PEA and PBT, both topically or orally, attenuates UV-induced photoaging via the cooperative interactions of phenolic components having anti-oxidative and collagen-protective activities.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.1
• /
• pp.23-31
• /
• 2007

The objective of this study is to investigate the effect of Al addition on the reaction behavior of cobalt with molten zinc. Pure cobalt specimen was immersion tested in the three kinds of molten zinc (pure, 0.12%Al added and 0.24%Al added) baths at $460^{\circ}C,\;490^{\circ}C\;and\;520^{\circ}C$. For the understanding of degradation processes, specimens were analyzed with scanning electron microscope (SEM) and energy dispersive spectrum (EDS), and electrochemical stripping method. When 0.12% and 0.24% Al was added in molten zinc baths, three intermetallic compounds layers of ${\gamma},\;{\gamma}_1,\;and\;{\gamma}_2$ were formed on the Co matrix and ${\beta}_1$ layer was not formed between the Co matrix and the ${\gamma}$ layer. Particles of CoAl intermetallic compound were formed at the interface between the ${\gamma}_2$ layer and zinc melt and they did not adhere to the Co-Zn intermetallic layer. Weight loss of the Co specimen increased as Al content in the molten zinc increased and the relationship of weight loss vs. immersion time followed parabolic rate law. Rate controlling process for the reaction rate of Co with Al added molten zinc was analyzed as the diffusion process of Al atom through a boundary layer between the ${\gamma}_2$ layer and the Al added zinc melt.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.1
• /
• pp.1-14
• /
• 2017

For the quantitative analysis of volatile organic compounds (VOC), the use of a proper solvent is crucial to reduce the chance of biased results or effect of interference either in direct analysis by a gas chromatograph (GC) or with thermal desorption analysis due to matrix effects, e.g., the existence of a broad solvent peak tailing that overlaps early eluters. In this work, the relative performance of different solvents has been evaluated using standards containing 19 VOCs in three different solvents (methanol, pentane, and hexane). Comparison of the response factor of the detected VOCs confirms their means for methanol and hexane higher than that of pentane by 84% and 27%, respectively. In light of the solvent vapor pressure at the initial GC column temperature ($35^{\circ}C$), the enhanced sensitivity in methanol suggests the potential role of solvent vapor expansion in the hot injector (split ON) which leads to solvent trapping on the column. In contrast, if the recurrent relationships between homologues were evaluated using an effective carbon number (ECN) additivity approach, the comparability assessed in terms of percent difference improved on the order of methanol (26.5%), hexane (6.73%), and pentane (5.24%). As such, the relative performance of GC can be affected considerably in the direct injection-based analysis of VOC due to the selection of solvent.

• Korean Journal of Materials Research
• /
• v.12 no.4
• /
• pp.296-303
• /
• 2002

For potential application to quantum mechanical devices, nano-composite thin films, consisting of GaAs quantum dots dispersed in SiO$_2$ glass matrix, were fabricated and studied in terms of structural, chemical, and optical properties. In order to form crystalline GaAs quantum dots at room temperature, uniformly dispersed in $SiO_2$matrix, the composite films were made to consist of alternating layers of GaAs and $SiO_2$in the manner of a superlattice using RF magnetron sputter deposition. Among different film samples, nominal thickness of an individual GaAs layer was varied with a total GaAs volume fraction fixed. From images of High Resolution Transmission Electron Microscopy (HRTEM), the formation of GaAs quantum dots on SiO$_2$was shown to depend on GaAs nominal thickness. GaAs deposits were crystalline and GaAs compound-like chemically according to HRTEM and XPS analysis, respectively. From measurement of optical absorbance using a spectrophotometer, absorption edges were determined and compared among composite films of varying GaAs nominal thicknesses. A progressively larger shift of absorption edge was noticed toward a blue wavelength with decreasing GaAs nominal thickness, i.e. quantum dots size. Band gaps of the composite films were also determined from Tauc plots as well as from PL measurements, displaying a linear decrease with increasing GaAs nominal thickness.

• Journal of Korea Foundry Society
• /
• v.23 no.1
• /
• pp.30-39
• /
• 2003

Porous hybrid preforms were fabricated by reactive sintering using the compacts consisting of SiC particles, Fe and Al powders. Squeeze casting processing was employed to produce the composite in which the matrix phase is Al-Si7Mg. The microstructural change and wear resistance of the composites were investigated in terms of an amount of SiC particles. The wear loss was increased with increasing the contact pressure in the alloy containing SiC particles coated with Cu. The most drastic change was found to the specimen tested at 2.5 MPa of contact pressure. Concerning the alloys containing SiC particles coated with Ni-P, a drastic increase in the wear loss exhibited at 2 MPa of contact pressure in those alloys containing 4 and 8 wt. % of SiC particles coated with Ni-P. In the alloy containing 16 wt. % a proportional increase in wear loss was observed to the change of contact pressure. With respecting to the sliding velocity, the wear loss of the alloy containing SiC particles coated with Cu increased at the initial stage of wear process and then decreased. Similar result was found in the alloys containing SiC particles coated with Ni-P. On the basis of the present results obtained, it was found that wear resistance of the alloys tested was improved to show in the order of the alloy reinforced by coated SiC particles > by uncoated SiC particles > by intermetallic compound without SiC particles.

• Journal of Korea Foundry Society
• /
• v.19 no.6
• /
• pp.493-500
• /
• 1999

Squeeze casting was used for fabricating a light metal base composite having high strength and wearresistance. Reactive sintering was used to prepare the preform of Squeeze casting. To utilize Fe-Al intermetallic compounds and SiC particle as a reinforcement, there needs to prepare Fe-Al mixed powder at 50, 60, 70at.%Al, and add SiC powder to the above mixture at 4, 7, 16, 24wt.%. The prepared mixture with SiC was reactive sintered in a tube furnace at $660^{\circ}C$ to get a porous hybrid preform of intermetallic compound and SiC. The preform prepared above was placed in a metal mold, preheated at $660^{\circ}C$ AC4C matrix was injected into the mold with the temperature of the melt at $610^{\circ}C$ After these processes, 66MPa was applied to the mold for 5 minute to finish the whole procedure. The maximum reaction temperature was increased with the increased Al amount, but decreased with the increased SiC amount. The density of the preform was decreased with SiC amount increase in the compacts due to swelling of the preform. An optical microscope was applied to observe the micro structure and the dispersion of the reinforcements. To analyze phases, We utilized XRD, EDS. Hardness test were chosen to get the information of mechanical properties. There were no significant changes in micro structure between the composite and preform. However, it was shown that uniform dispersion of the reinforcers and complete infiltration of the melt into the preform were achieved through the procedure of the squeeze casting. It was observed that the hardness of the composite is decreased with increased SiC amount, resulting from the volumetric expansion of the preform.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.1
• /
• pp.31-36
• /
• 2014

Social network services(SNS) including Twitter and Facebook are good resources to extract various issues like public interest, trend and topic. This paper proposes a method to extract query-related issues by calculating relatedness between terms in Twitter. As a term that frequently appears near query terms should be semantically related to a query, we calculate term relatedness in retrieved documents by summing proximity that is proportional to term frequency and inversely proportional to distance between words. Then terms, relatedness of which is bigger than threshold, are extracted as query-related issues, and our system shows those issues with a connected network. By analyzing single transitions in a connected network, compound words are easily obtained.