• 대한수학회지
• /
• 제48권1호
• /
• pp.83-104
• /
• 2011

In this note, compound-commuting additive maps on matrix spaces are studied. We show that compound-commuting additive maps send rank one matrices to matrices of rank less than or equal to one. By using the structural results of rank-one nonincreasing additive maps, we characterize compound-commuting additive maps on four types of matrices: triangular matrices, square matrices, symmetric matrices and Hermitian matrices.

• 열처리공학회지
• /
• 제16권5호
• /
• pp.253-259
• /
• 2003

In this study, to find out the reason of deterioration in surface roughness of steel and cast iron after Tufftride, it has been investigated on the relation between the surface roughness and various factors such as the evolution of compound layer, surface morphology, and surface hardness, and change of pore ratio in the compound layer during Tufftride at $580^{\circ}C$. It is found that the surface roughness was increased with the evolution of compound layer during Tufftride of steel and cast iron. The change of surface roughness after Tufftride was reduced with decreasing tho content of carbon and cementite ($Fe_3C$) in the materials. in the cast irons, the various shaped graphites that was exposed to the surface should induce the discontinuous growth of the compound layer, and this resulted in the incoherent interfaces between matrix and compound layer and the deterioration of surface roughness. In the steels, the existence of cementites in the matrix resulted in the incoherent interfaces between matrix and compound layer. It is considered that during Tufftride the surface roughness must be mainly influenced by the formation of the incoherent interface between compound layer and matrix that is affected by some factors such as the microstructure, the composition, and the hardness of the matrix.

• Journal of Ginseng Research
• /
• 제42권2호
• /
• pp.229-232
• /
• 2018

• 생명과학회지
• /
• 제9권4호
• /
• pp.460-465
• /
• 1999

In the giant freshwater prawn Macrobrachium rosenbergii, the paired testes were united by the testes bridge in a H-shape. During mating male discharged two hemispermtophores from right and left genital pore and they were joined and formed a compound spermatophore in peach shape. Hemispermatophore was considered to be produced at proximal and middle vas deferens region. The compound spermatophore consisted of an eosinophilic inner matrix, a basophilic outer matrix and paired sperm mass burried in the basophilic matrix. The size of compound spermatophore was 6.4∼ 9.3 mm in length and 2.4∼5.1 mm in width regardless of carapace length. After the spermatophore was deposited on female's ventral sternum behind of 5th pereiopod, it was moved to the ventral surface of 3rd and 4th pereiopods by means of the beating of male's 1st and 2nd pleopods.

• 분석과학
• /
• 제24권2호
• /
• pp.135-141
• /
• 2011

세포외 기질의 주요 단백질 구성요소들을 가수분해시켜 재편성(turnover)과 재형성(remodeling)에 핵심 역할을 하는 효소가 matrix metalloproteinases (MMPs)이다. MMPs 중에서 MMP-2와 MMP-9는 catalytic domain이 fibronectin-like domain에 의해 hemopexin-like domain 부위와 떨어져 있는 점이 다른 MMP들과 다르다. MMP-9 억제제의 개발로 간암전이를 막을 수 있다고 보고되고 있다. Hovenia dulcis Thunberg에서 MMP-9의 활성을 저해하는 물질을 분리 정제하였고, 분리된 물질에 대한 MMP-9의 활성억제 여부를 확인하였다. Ethyl acetate (EA)에 의해 용출 분리된 두개의 화합물(화합물 A, 화합물 B)과 MeOH로 용출 분리된 한 개의 화합물(화합물 C)에서 MMP-9의 활성에 저해를 보였고, $^1H$와 $^{13}C$ NMR, GC-MS 그리고 IR로 이들의 구조를 분석하였다. 화합물 A는 hydroxyl기와 methoxyl기로 치환된 벤젠고리를 함유하는 화합물로 catechine 계열로 추정되었으며, 화합물 B와 C는 hydroxyl기와 methoxyl기로 치환된 벤젠 고리와 분자내 carbonyl기를 갖고 있는 nobiletin 계열의 화합물로 추정되었다. 그리고 화합물 A는 MMP-9 활성을 1.0%농도에서 76% 억제하였으며, 화합물 B는 동일한 농도에서 66% 억제하는 것으로 나타났다. 그리고 화합물 C는 1.0%농도에서 71% 억제하는 것으로 나타나 화합물 A가 MMP-9의 활성 저해능이 가장 좋은 것으로 나타났다.

• 제어로봇시스템학회논문지
• /
• 제18권9호
• /
• pp.806-811
• /
• 2012

In this paper Hartley functions are used to approximate the solutions of continuous time linear dynamical system. The Hartley function and its integral operational matrix are first presented, an efficient algorithm to solve the Stein equation is proposed. The algorithm is based on the compound matrix and the inverse of sum of matrices. Using the structure of the Hartley's integral operational matrix, the full order Stein equation should be solved in terms of the solutions of pure algebraic matrix equations, which reduces the computation time remarkably. Finally a numerical example is illustrated to demonstrate the validity of the proposed algorithm.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.67-70
• /
• 2000

Mechanical properties of (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al hybrid composites fabricated by the reaction squeeze casting were compared with those of (15%$AI_20_3{\cdot}SiO_2$)/Al composites. Intermetallic compound formed by reaction between molten aluminum and reinforcing powder was uniformly distributed in the Al matrix. These intermetallic compounds were identified as $Al_3$NI using EDS and X-ray diffraction analysis. Microhardness and flexural strength of hybrid composites were higher than that of (15%$AI_20_3{\cdot}SiO_2$)/Al Composite. In-Situ fracture tests were Conducted on (15%$AI_20_3{\cdot}SiO_2$)/Al Composites and (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al hybrid composites to identify the microfracture process. It was identified from the in-situ fracture test of (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al composites, microcracks were initiated mainly at the short fiber / matrix interfaces. As the loading was continued, the crack propagated mainly along the separated interfacial regions and the well developed shear bands. It was identified from the in-situ fracture test of (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al hybrid composites, microcracks were initiated mainly by the short fiber/matrix interfacial debonding. The crack proceeded mainly through the intermetallic compound clusters

• 한국결정학회지
• /
• 제11권2호
• /
• pp.89-94
• /
• 2000

A crystallographic unit cell can be transformed into another one by a 3×3 transformantion matrix. If the determinant of the transformation matrix has a negative value, the newly transformed unit cell becomes a left-handed cell. The best way of transforming the left-handed cell to the right-handed one is to multiply each element of the transformation matrix by-1, and its corresponding transformation matrix must be applied tot he atomic coordinates of a noncentrosymmetric crystal so as to maintain the absolute configuration unchanged. The behaviour of absolute configuration caused by transforming the crystallographic unit cell was examined theoretically and experimentally on the compound (S)-(+)-4-phenyl-1-[4-aminobenzoyl) indoline-5-sulfonyl]-4,5-dihydro-2-imidazolone hydrochloride.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1889-1900
• /
• 1995

In this study, a large deflection analysis of a plane frame composed of a thin-walled tube in investigated. When bent, a thin-walled tube is usually controlled by local buckling and subsequent bending collapse of the section. So load resistance reaches the yield level in a thin-walled rectangular tube. This relationship can be divided into three regimes : elastic, post-buckling and crippling. In this paper, this relationship is theoretically presented to be capable of describing nonlinearities and a stiffness matrix is derived by introducing a compound beam-spring element. A numerical analysis uses a constant incremental energy method and the solution is obtained by modifying stiffness matrix at elastic/inelastic stage. This analytical results, load-deflection paths show a good agreement with the test results.

• 한국전기전자재료학회논문지
• /
• 제36권6호
• /
• pp.603-608
• /
• 2023

Carbon black with high purity and excellent conductivity is used as a conductive filler in the semiconductive compound for EHV (Extra High Voltage) power cables of 345 kV or higher. When carbon black and CNT (carbon nanotube) are applied together as a conductive filler of a semiconductive compound, stable electrical properties of the semiconductive compound can be maintained even though the amount of conductive filler is significantly reduced. In EHV power cables, since the semi-conductive layer is close to the conductor, stable electrical characteristics are required even under high-temperature conditions caused by heat generated from the conductor. In this study, the theoretical principle that a semiconductive compound applied with carbon black and CNT can maintain excellent electrical properties even under high-temperature conditions was studied. Basically, the conductive fillers dispersed in the matrix form an electrical network. The base polymer and the matrix of the composite, expands by heat under high temperature conditions. Because of this, the electrical network connected by the conductive fillers is weakened. In particular, since the conductive filler has high thermal conductivity, the semiconductive compound causes more thermal expansion. Therefore, the effect of CNT as a conductive filler on the thermal conductivity, thermal expansion coefficient, and volume resistivity of the semiconductive compound was studied. From this result, thermal expansion and composition of the electrical network under high temperature conditions are explained.