• Journal of Korea Foundry Society
• /
• v.39 no.3
• /
• pp.33-43
• /
• 2019

In this study, the effects of Zn additions on the mechanical properties of Al-Si-Mg-Cu alloys were investigated by increasing the amount of Zn up to 8wt.%. As the Zn content was increased up to 6 wt.%, the yield strength and elongation changed linearly without any significant changes in the size and shape of the main reinforcement phase. However, it was confirmed by SEM observation that the Mg-Zn phase formed between the reinforcement phases when the amount of Zn added exceeded 7wt.%. A Mg-Zn intermetallic compound formed between the $Mg_2Si$ phase, becoming a crack initiation point under stress. Thus, the formation of the Mg-Zn phase may cause a sharp decrease in the elongation when Zn at levels exceeding 7 wt.%. It was also found that the matrix became more brittle with increasing the Zn content. From these results, it can be concluded that the formation of the Mg-Zn intermetallic compound and the brittle characteristics of the matrix are the main causes of the remarkable changes in the mechanical properties of this alloy system

• Journal of Adhesion and Interface
• /
• v.15 no.2
• /
• pp.49-56
• /
• 2014

In this study, properties of adhesion between adhesion promoter-containing rubber compound and zinc coated steel cord was investigated. Cobalt salt, resorcinol formaldehyde resin (RF resin) and hexamethoxymethylmelamine (HMMM) were used to adhesion promoter. Since cobalt salts accelerate sulphidation rate of zinc at zinc coated steel cord surface, pullout force of rubber compound applying cobalt salts was increased compared to that of rubber compound without applying cobalt salts. Pullout force and rubber coverage of rubber compounds applying all adhesion promoters were superior because strong interlocking between rubber matrix increased modulus due to applying RF resin and HMMM and grown zinc sulfides at zinc coated steel cord surface.

• Journal of Korea Foundry Society
• /
• v.15 no.6
• /
• pp.566-573
• /
• 1995

In this study, the microstructural characteristics such as primary silicon, eutectic silicon, $SiC_p$ dispersion behavior, compound amount and Si solubility in $Al/SiC_p$ composite fabricated by the squeeze casting under various conditions were investigated systematically. As applied pressure(MPa) increases, cooling rate and compound amount are increased. In gravity casting, the cooling rate of hypereutectic composite is slower than of hypoeutectic composite by exothermic reaction of primary Si crystallization. But the cooling rate of hypereutectic composite is faster than that of hypoeutectic composite fabricated by same applied pressure, because amount of primary Si crystallization in hypereutectic composite was decreased, on the contrary, primary ${\alpha}-Al$ in hypoeutetic composite was increased due to increase of Si solubility in matrix by applied pressure. The crystalized primary silicon in hypereutectic composite fabricated by squeeze casting become more fine than that in non-pressure casting This is because mush zone became narrow due to increase of Si content of eutectic composition by pressure and time for growth of primary silicon got shorter according to applied pressure. It is turned out that eutectic temperature and liquidus are decreased by the increasing of squeeze pressure in all the composite due to thermal unstability of matrix owing to increasing of Si solubility in matrix by the increasing of applied pressure, as indicated in thermal anaiysis(DSC) results.

• Journal of Korea Foundry Society
• /
• v.8 no.4
• /
• pp.422-428
• /
• 1988

In this study we have investigated the effects of Mm, MmH and $MmH_2$ on the matrix development in cast iron, The conclusive summary is as follows: The spheroidal graphite was observed when 0.5wt.% or more of mischmetal was added and the matrix was of ledeburite structure, but bull's eye structure was not observed. On the other hand, the bull's eye structure was observed when 0.25wt.% of MmH, or 0.25wt.% to 0.5wt.% of $MmH_2$ was added. Above limit of the additives, the matrix changed into ledeburite structure. As the hydrogen content of mischmetal compound increased from MmH, the range of additives to obtain bull's eye structure expanded. This reveals the significant effect of mischmetal hydride on matrix development in cast iron and the possibility of practical use of the additives.

• Biomolecules & Therapeutics
• /
• v.17 no.4
• /
• pp.422-429
• /
• 2009

Invasion and metastasis is the main cause of cancer mortality. Angiogenesis is a prerequisite for the tumor growth and metastasis. Matrix metalloproteinases (MMPs) are the key enzymes playing in the invasive growth and metastasis of cancer as well as angiogenesis. Xanthohumol, a prenylated chalcone of the Hop plant (Humulus lupulus L), has been reported to suppress cancer invasion and angiogenesis. In the present study, we investigated the antiinvasive effects of xanthohumol (1) and its synthetic derivatives, 4'-O-methylxanthohumol SEM ether (2), xanthohumol C (3), and xanthohumol C MOM ether (4) in relation to MMP expression in HT-1080 human fibrosarcoma cells. The compound 1 and its derivative, 3 and 4, significantly inhibited serum-induced HT-1080 cell invasion, and 12-O-tetradecanoylphorbol-13-acetate (TPA)-enhanced activity and expression level of MMP-2 and MMP-9 in a concentration-dependant manner. In addition, they inhibited TPA-enhanced expression of MT1-MMP with relatively weak inhibition in tissue inhibitor of metalloproteinase (TIMP)-1 and TIMP-2 level. The compound 1 significantly decreased the cell viability, whereas the derivatives, 2 and 3 showed no cytotoxicity, and compound 4 showed slight cytotoxicity in the cells. Furthermore, in a chick chorioallantoic membrane (CAM) assay, the derivatives 3 and 4 dose-dependently suppressed vascular endothelial growth factor (VEGF)-induced angiogenesis, which is similar to that of compound 1. Taken together, the results indicate that compounds 3 and 4 may be valuable anti-angiogenic agents in the treatment of chronic diseases such as cancer and inflammation working through suppression of MMP-2 and MMP-9.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.2
• /
• pp.173-182
• /
• 1996

An analytical model has been developed to predict the elastic properties of a filled resin reinforced by chopped fibers, a three-phase composite such as a filled sheet molding compound(SMC). In the model the matrix material and fillers form an effective matrix. The effective matrix is then considered to be reinforced with long fibers lying in the sheet plane but randomly oriented in the plane. Expressions for the resulting transversely isotropic composite properties are explicitly presented. Using this model, the Young's and shear moduli are calculated for the SMC sample with filler weight fraction of 35% and fiber content of 30%. The same properties are also determined experimentally. The agreement between the calculated and measured elastic moduli is found to be very good for the in-plane properties. However, the out-of-plane properties show a large difference because the effect of voids is not taken into account in the model.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.243.1-243.1
• /
• 2002

Matrix metalloproteinases (MMPs) play an important role in tumor invasion and metastasis by matrix degradation. To analyze the effect of 2-amino-3-ethoxycarbonyl-1-methyl pyrolo (3,2-b) naphtho-4,9-dione (compound 1) on the invasion or metastasis of cancer cells the expression of matrix metalloproteases (MMPs) was investigated in human fibrosarcoma HT 1080 cells by AT -PCR or gelatin zymographic methods. (omitted)

• Journal of Korea Foundry Society
• /
• v.26 no.3
• /
• pp.123-128
• /
• 2006

Mechanical and thermal properties of spray-cast hypereutectic Al-20wt.%Si-xwt.%Fe alloys (x=0, 1, 3, 5) were investigated. After the spray-casting, hot extrusion was performed at $400^{\circ}C$. Intermetallic compound (${\beta}-Al_5FeSi$) and primary Si are observed in the spray-cast aluminum alloys. The size of primary Si and intermetallic compound of the spray-aluminum alloys became finer and more uniformly distributed than that of the permanent mold cast ones. Ultimate tensile strength of the spray-cast aluminum alloys increased by increasing Fe contents, but that of the permanent mold cast aluminum alloys decreased by increasing Fe contents possibly due to increased amount of coarse intermatallic compound. The coefficient of thermal expansion (CTEs) of the aluminum alloys became lower with finer primary Si and intermetallic compound, and this is attributed to the increased amount of interfacial area between the aluminum matrix and the phases of finer Si and intermetallic compound.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.277-284
• /
• 2004

Low carbon steels containing Si of up to $1.2\;wt\%$ were oxidized in air at 1373 K and 1523 K, i.e. below and above the eutectic temperature of FeO and $Fe_2SiO_4$. The influence of a impurity element, S on behavior of scale formation during oxidation was investigated by using $M\"{o}chssbauer$ spectroscopy and EDS. This allowed establishment of an interface oxidation model of Si-added steel depending on temperature and an impurity element. A compound of FeO and FeS was formed in the scale/matrix interface of low carbon steels containing S of up to $0.03\;wt\%$ oxidized above 1213 K of the eutectic temperature. This was flat formed between $Fe_2SiO_4$ nodules along the scale/matrix interface without selective oxidation. It is due to low viscosity and high wettability of the compound of FeO and FeS in liquid. Conventional metallographic examinations revealed that roughness of the scale/matrix interface in Si-added steels became flat as the content of S increased. It was independent of oxidizing temperature and Si content. Effects of oxidizing temperature and an impurity element content on descaling characteristics in Si-added steels were evaluated by using a hydraulic descaling simulator. Good descaling characteristics was attributable to this flatness of the scale/matrix interface.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1146-1154
• /
• 2000

Fatigue strength of NiAl and Ni$_3$Al particulate reinforced aluminum alloy composites fabricated by the diecasting method was examined at room and elevated temperatures. The results were compared wit h that of SiC particulate reinforced one. The particulate reinforced composites showed some improvement in the static and fatigue strength at elevated temperatures when compared with that of Al alloy. The composites reinforced by intermetallic compound particles showed good fatigue strengths at elevated temperatures especially $Ni_3AI_{p}/Al$ alloy composite showed good fatigue limit up to high temperature of 30$0^{\circ}C$. Adopting intermetallic compound particle as a reinforcement phase, it will be possible to develop MMC representing better fatigue property at elevated temperature.