• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.291-294
• /
• 2000

Free-form surfaces arise in shipbuilding, automotive and aerospace industries. Specially compound free-form surfaces so do. Machining complicated products consist of compound surface, it is very important to avold and remove tool interferences. By the way, in compound surfaces the tool interference can occur not only in the tool path direction but also in the other direction. A new tool interference detection and correction using tool interference conditions is suggested to identify and correct the tool interference in compound surfaces.

• 한국정밀공학회지
• /
• 제12권2호
• /
• pp.112-122
• /
• 1995

While many surfaces such as automobile outer panels, ship hulls and airfoils are characterized by their smooth, free-form shapes, a far larger class of functional surfaces are characterized by highly irregular, multi-featured shapes consisting of pockets, channels, ribs, etc. In constaract to the design of aesthetic, free-form surfaces, functional surface design can perhaps best be viewed as a process of assembling a collection of known component surfaces to form a single compound surface. In this paper, we presents a feature-based functional surface modeling method. A single feature involves a secondary surface, which we must join to a primary surface with a smooth transition between two boundary courves. Through recursive blending of a secondary surface with the primary surface, the mullti-featured surface is represented. After constructing a compound surface, we generate the Z-map for NC machining of the surface. Offsetting the Z-map using the inverse offsetting technique, we get CL tool paths with out gouging.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.455-461
• /
• 2010

Automated magnetic abrasive polishing which can be applied after machining of the mold on a machine tool without unloading is very effective for finishing a complicated injection mold surface. This study aims to realize one step polishing of free form surface with the same machine tool. For this purpose, magnetic flux density according to the change of curvature radii was simulated for selecting polishing conditions and experimental verification was performed with a complicated mold of aluminum alloy. As a result, it was seen by the simulation that the magnetic flux density at a gradual curvature of the mold was higher than at a steep curvature and the higher magnetic flux density produced the better surface roughness in the experimentation. The deviation for the surface roughness of the mold decreased on the whole and the uniform mold surface was obtained after the automated magnetic abrasive polishing.

• 한국환경과학회지
• /
• 제28권10호
• /
• pp.851-861
• /
• 2019

In this study, we performed a sediment elution experiment to evaluate water quality in terms of phosphorus, as influenced by the dissolved oxygen consumed by sediments. Three separate model column treatments, namely, raw, calcined, and sonicated oyster shell powders, were used in this experiment. Essential phosphorus fractions were examined to verify their roles in nutrient release from sediment based on correlation analyses. When treated with calcined or sonicated oyster shell powder, the sediment-water interface became "less anaerobic," thereby producing conditions conducive to partial oxidation and activities of aerobic bacteria. Sediment Oxygen Demand (SOD) was found to be closely correlated with the growth of algae, which confirmed an intermittent input of organic biomass at the sediment surface. SOD was positively correlated with exchangeable and loosely adsorbed phosphorus and organic phosphorus, owing to the accumulation of unbound algal biomass-derived phosphates in sediment, whereas it was negatively correlated with ferric iron-bound phosphorus or calcium fluorapatite-bound phosphorus, which were present in the form of "insoluble" complexes, thereby facilitating the free migration of sulfate-reducing bacteria or limiting the release from complexes, depending on applied local conditions. PCR-denaturing gradient gel electrophoresis revealed that iron-reducing bacteria were the dominant species in control and non-calcined oyster shell columns, whereas certain sulfur-oxidizing bacteria were identified in the column treated with calcined oyster powder.

• 한국음향학회지
• /
• 제35권6호
• /
• pp.473-479
• /
• 2016

본 연구는 센서 표면에 고정된 티오에스터 분자와 금 나노입자를 이용하여 수용액 중의 시안화이온(cyanide)을 선택적이고, 고민감도로 검출할 수 있는 200 MHz 표면음향파(Surface Acoustic Wave, SAW) 센서의 개발에 관한 것이다. SAW 센서표면에 형성된 티오에스터 단분자막은 시안화이온의 친핵성 첨가반응에 의해 가수분해되어 티올(thiol)이 만들어지고, 티올 분자는 다시 금 나노입자와 반응에 의해 티올-금 나노입자 복합체를 형성한다. 이후 신호증폭을 위해, gold(III) chloride trihydrate와 hydroxylamine hydrochloride 조합에 의한 금 나노입자의 사이즈 확대반응을 수행하였다. SAW 센서는 수용액 중에서 시안화이온에 대한 검출 능력이 17.7 uM이었으며, 공진주파수 변화량은 시안화이온의 농도가 커지면서 포화되는 현상을 보여주었다. 한편, 제작된 SAW 센서는 시안화이온 이외의 플루오라이드(fluoride), 아세테이트(acetate), 그리고 설페이트(sulfate) 이온 등의 다른 음이온에는 전혀 반응성이 없었으며, 다른 음이온에 의한 간섭현상도 나타나지 않았다. 끝으로 모든 실험은 재현성 있는 실험 결과를 얻기 위해서 자체 제작한 유체제어 모듈과 센서를 이용하여 진행하였다.

• 구강회복응용과학지
• /
• 제33권2호
• /
• pp.71-79
• /
• 2017

목적: 본 연구는 베릴륨이 함유되지 않은 금속-도재용(Ni-Cr)합금 산화처리 시 도재로 안에 티타늄 파우더를 화학적 촉매로 이용하여 산화막을 억제하고, 금속 표면에 형성될 불순물을 제어하여 도재의 결합력을 증진시켜 줄 수 있는 가능성을 분석 하고자 하였다. 연구 재료 및 방법: 베릴륨이 함유되지 않은 금속-도재용(Ni-Cr)합금 산화처리 시 도재로 안에 티타늄을 화학적 촉매로 이용하였다. 티타늄 파우더를 화학적 촉매로 사용하지 않은 T1군을 대조군으로 하고, 10 g, 20 g 티타늄 파우더를 사용한 시편을 T2, T3군으로 분류하여 전단결합강도와 계면특성 관찰을 위하여 제작 하였다. 일원배치 분산분석(one-way ANOVA)은 그룹의 차이를 검사하기 위해서 시행하였고 사후 검정(Tukey Honestly Significant Difference test)은 그룹 간의 통계적 분석을 위하여 수행되었다. 결과: 티타늄 파우더를 화학적 촉매로 사용 한 T3군의 3점 굽힘 결합강도와 산화막 두께를 측정한 결과, $39.22{\pm}3.4MPa$와 $6.66{\mu}m$로 가장 높고, 얇게 나타났으며, T2군은 $34.65{\pm}1.39MPa$과 $13.22{\mu}m$, 티타늄 화학적 촉매로 사용하지 않은 대조군 T1군은 $32.37{\pm}1.91MPa$과 $22.22{\mu}m$ 순으로 나타났다. 결론: 시편들의 결합강도를 통계 분석한 결과, 티타늄 파우더를 화학적 촉매로 사용한 실험 T3, T2군의 결합력이 높게 나타났고, 산화막 두께 역시 대조군 T1군 보다 얇게 나타나 것으로 결합력 증진에 영향을 줄 수 있음이 관찰 되었다.