• 한국식품영양학회지
• /
• 제15권1호
• /
• pp.58-63
• /
• 2002

우리나라 남해안 완도지역에 자생하는 해조류 중 갈조류 9종, 홍조류 5종, 녹조류 2종의 지질함량을을 조사하고 지방산조성을 GLC로 분석하였다. 총지질 함량을 볼 때 갈조류 9종은 0.58∼3.00%, 홍조류 5종은 0.47∼2.16%, 녹조류 2종은 0.55∼2.00%로 매우 낮았다. 지방산 성분중 생리적으로 의의가 큰 n-3계열 지방산은 linoleic (18:3), stearidonic (18:4), eicosapentaenoic(20:5) 및 docosahexaenoic (22:6), n-6계열 지방산은 linoleic(18:2), linolenic(18:3), eicosadienoic (20:2),eicosatrienoic(20:3) 및 arachidonic acid(20:4) 등이 각각 정량되었다. 총 n-3 및 n-6 지방산 조성을 보면 갈조류는 1.46∼25.67% 및 0∼48.51%, 홍조류는 1.17∼21.91% 및 0.28%∼29.35%, 녹조류는 3.67∼ 10.61% 및 4.1 ∼8.66%였다. 해조류는 갈조류, 홍조류 및 녹조류의 종류에 따라 n-3계열 불포화지방산과 n-6계열 지방산 함량 조성이 매우 상이하였으며, 특히 영양학적긴 측면에서 볼 때 지충이, 톳유엽 및 실풀 외에도 광생이모자반, 뜸부기, 톱니모자반, 꼬불꼬시래기 등은 n-3 polyenes의 조성비율이 높은 기능성 식품으로 활용가치가 높은 것으로 고찰되었다.

• Bulletin of the Korean Chemical Society
• /
• 제15권3호
• /
• pp.256-260
• /
• 1994

Perovskite type oxides of the $Sr_xHo_{1-x}FeO_{3-y}$ system with compositions of x=0.00, 0.25, 0.50, 0.75, and 1.00 have been prepared at 1200$^{\circ}$C in air. X-ray powder diffraction assigns the compositions with x=0.00 and 0.25 to the orthorhombic crystal system and those with x=0.50, 0.75, and 1.00 to the cubic one. The unit cell volumes of solid solutions increase with x in the system. Nonstoichiometric chemical formulas were determined by Mohr salt titration. The mole ratio of $Fe^{4+}$ ions to total iron ions and the concentration of oxygen ion vacancies increase with x. Mossbauer spectra for the compositions of x= 0.00, 0.25, and 0.50 show six lines indicating the presence of $Fe^{3+}$ ions in the octahedral site. However, the presence of $Fe^{4+}$ ions may also be detected in the spectra for the compositions with x=0.25 and x=0.50. In the compositions with x=0.75 and 1.00, single line patterns show also the mixed valence state of $Fe^{3+}$ and $Fe^{4+}$ ions. The electrical conductivity in the temperature range of -100$^{\circ}$C to 100$^{\circ}$C under atmospheric air pressure increases sharply with x but the activation energy decreases with the mole ratio of $Fe^{4+}$ ion. The conduction mechanism of the perovskite system seems to be hopping of the conduction electrons between the mixed valence iron ions.

• 한국응용곤충학회지
• /
• 제61권1호
• /
• pp.35-50
• /
• 2022

본 종설에서는 벼와 옥수수, 콩과작물, 감자, 들깨, 참깨에 대한 주요 나비목 해충 22종의 성페로몬 조성에 대해 국내외에서 연구된 결과들을 비교하면서 성충 예찰 수단으로 활용 가능한지를 분석하여 간단하게 정리하였다. 이 중 4종의 국내 개체군에서는 성페로몬샘 추출물로부터 성페로몬 성분들이 동정되고, 야외실험을 통해 그 조성이 규명되었다. 다른 3종에 대해서는 국내 개체군을 이용한 페로몬 화합물의 화학적 동정과정은 없었으나, 보고된 성페로몬 성분들을 이용한 실내 및 야외에서의 세밀한 조성실험을 통해 국내 개체군에 대한 최적 예찰조성이 선발되었다. 일부 종에 대해서는 최적 예찰미끼 개발을 위해 성페로몬샘에서 발견되는 미량성분의 역할에 대해 검토할 필요가 있다.

• 생약학회지
• /
• 제14권2호
• /
• pp.44-50
• /
• 1983

An attempt was made to investigate free and bound lipid contents and fatty acid compositions of ginseng and its eveven kinds related crude drugs. Contents of free and bound lipids of ginseng were 1.23% and 0.47%, and those of the related crude drugs were $0.31{\sim}13.05%$ and $0.26respectively. Fourteen even-numbered and 4 odd-numbered fatty acids were identified by GLC in those lipids from ginseng, and the major fatty acids were linoleic, palmitic, oleic and linolenic acids. The crude drugs are notably different from ginseng in kinds and compositions of fatty acids of free and bound lipids. Composition ratios of unsaturated fatty acids were higher in free lipids from ginseng than those of the crude drugs except 'Won-ji' Polygalae Radix.

• Journal of Computational Design and Engineering
• /
• 제3권4호
• /
• pp.370-384
• /
• 2016

Computer-aided materials design requires new modeling approaches to characterize and represent fine-grained geometric structures and material compositions at multiple scales. Recently, a dual-Rep approach was developed to model materials microstructures based on a new basis function, called surfacelet. As a combination of implicit surface and wavelets, surfacelets can efficiently identify and represent planar, cylindrical, and ellipsoidal geometries in material microstructures and describe the distribution of compositions and properties. In this paper, these primitive surfacelets are extended and composite surfacelets are proposed to model more complex geometries. Composite surfacelets are constructed by Boolean operations on the primitives. The surfacelet transform is applied to match geometric features in three-dimensional images. The composition of the material near the identified features can then be modeled. A cubic surfacelet and a v-joint surfacelet are developed to demonstrate the reverse engineering process of retrieving material compositions from material images.

• 한국조경학회지
• /
• 제26권1호
• /
• pp.28-35
• /
• 1998

Six soil compositions with three seeding rates were evaluated for influence on germination, coverage, height and sod development of Phragmites japonica. 1. Germination was high on peat, vermiculite and bark as compared with on peatmoss and sandy loam. 2. Covering rate was high within 2 months when seeded at 9g/$m^2$, but became same within 3 months afterwards when seeded at 3,6 and 9g/$m^2$, respectively. 3. Sod was highly developed on peat and bark treatments whereas Sandy loam, peatmoss and vermiculite treatments didn't develop sod. 4. Sod grown on bark weighed light and, therefore, was suggested best from a dealing cost point of view. 5. Cutting at 10 cm height didn't influence on sod development regardless of soil compositions.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.829-834
• /
• 1994

The aim of this study is to investigate the changes in dielectric properties, Young's modulus and remnant compressive strength with compressive cyclic loading in PZT of tetragonal, MPB and rhombohedral composition. Higher relative dielectric constants appeared in the poled condition than the unpoled condition for all the compositions. After poling treatment remarkably higher relative dielectric constants were observed particularly in MPB, tetragonal compositions. Until five percent of the expected fatigue life was exhausted, the dielectric constant increased with compressive cyclic stress in MPB and rhombohedral while it remained nearly constant in tetragonal. During the subsequent compressive cyclic stress, dielectric constant decreased in all the three compositions. As the compressive cyclic stress is applied the change of Young's modulus was coincided with the change of remnant compressive strength.

• 한국환경과학회지
• /
• 제4권3호
• /
• pp.285-294
• /
• 1995

A comparative study on the chemical compositions of precipitations from February 1993 to April 1993 in Sungnam city of Kyunggi province, Inchon city, Kangneung city of Kangwon province, and Chongwon-gun of Chungbuk province has been performed. The metal cation and anion concentrations were measured by atomic absorption spectrometer and ion liquid chromatography, respectively. pH/Ion meter and direct nesslerization method were used for the concentration measurements of $H^+$ and $NH^{4+}$ ions, respectively. The quantitative orders of the cation and anion average concentrations, correlation coefficients between the ion concentrations, and pH values are used for chemical analysis on the environmental pollution and pollutant sources in the urban, surburban, seaside, and rural areas of the Korean Peninsula.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.169-171
• /
• 2009

We have fabricated CIGS thin film absorber layers by the evaporation of CIGS powders which were synthesized by solutions with different atomic ratio compositions. We found that the polycrystalline structural properties and optical properties of the deposited CIGS thin films were strongly dependent on the CIGS powder synthesis solution compositions. For three different solution compositions, Cu:In:Ga:Se= 4:3:1:8, 8:3:1:8, 12:3:1,8, the deposited thin film crystalline structures were varied form InSe crystalline structure to CIGS chalcopyrite structures. Our results showed that CIGS powder evaporation is potential for the one step fabrication process for CIGS thin film absorber layer deposition.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.158-163
• /
• 2000

Six different SiC ceramics with SiO2-Re2O3 (Re=Yb, Er, Y, Dy, Gd, Sm) as sintering additives have been fabricated by hot-pressing the SiC-Re2Si2O7 compositions at 1850$^{\circ}C$ for 2 hr under a pressure of 25 MPa. The room temperature strneth and the fracture toughness of the hot-pressed ceramics were characterized and compared with those of the ceramics sintered with YAG (Y3Al5O12). Five SiC ceramics (Re=Yb, Er, Y, Dy, Gd) investigated herein showed sintered densities higher than 94% of theoretical. Tthe SiC-Re2Si2O7 compositions showed lower strength and comparable toughness to those from SiC-YAG composition, owing to the chemical reaction between SiO2 and SiC during sintering. SiC ceramics fabricated from a SiC-Y2Si2O7 composition showed the best mechanical properties of 490 MPa and 4.8 MPa$.$m1/2 among the compositions investigated herein.