• 동력기계공학회지
• /
• 제5권3호
• /
• pp.80-87
• /
• 2001

Decorative properties of chromium depositions from oxalic acid bath containing chromium oxide and ammonium sulfate have been examined over a wide range of bath compositions and plating conditions. The obtained results from this experiment are summarized as follow: The followings were determined as a optimum conditions, bath compositions; $CrO_3\;200{\sim}250\;g/{\ell},\;H_2C_2O_4{\cdot}2H_2O\;500{\sim}700\;g/{\ell},\;(NH_4)_2SO_4\;40{\sim}120\;g/{\ell}$, and operation conditions; pH $2.0{\sim}2.5$, current density $15{\sim}250\;A/dm^2$ at bath temperature range of $30{\sim}80^{\circ}C$. Bright chromium deposits were obtained over a wide range of ammonium sulfate concentration and bath temperature. Decorative property for chromium deposition was adopted to apply stoichiometric ratio of $CrO_3$ concentration and $H_2C_2O_4{\cdot}2H_2O$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1341-1346
• /
• 2004

Detailed flame structures of the opposed flames formed for different oxidant compositions are studied numerically. The detailed chemical reactions are modeled by using the CHEMKIN code. Only the $CO_{2}$ and $H_{2}O$ are assumed to participate by absorbing the radiative energy while all other gases are assumed to be transparent. The discrete ordinates method and a narrow band based WSGGM with a gray gas regrouping technique are applied for modeling the radiative transfer through non-homogeneous and non-isothermal combustion gas mixtures generated by the opposed flow flames. The results show that the different radiation model can cause different results for flame structures and the WSGGM with gray gas regrouping is successful in modeling the opposed flames with non-gray gas mixture. The results also show that a reasonable information on the flame structure can be obtained from the modeling by considering different chemical compositions of the oxidant.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.237-242
• /
• 2014

Recently much research are has been done into the compositions of lead-free solders. As a result, there has been a rapid increase in the number of new compositions. In the past, the properties of these new compositions were determined and verified through drop-impact tests. However, these drop tests were expensive and it took a long time to obtain a result. The main goal of this study was to establish an analytical method capable of predicting the impact life-time of a new solder composition for board-level flip chips though the application of drop simulations using LS-DYNA. Based on the reaction load obtain with LS-DYNA, the drop-impact fracture cycles were predicted. The study was performed using a Sn-3.0Ag-0.5Cu solder (305 composition). To verify the reliability of the proposed analytical method, the results of the drop-impact tests and life-time analysis were compared, and were found to be in good agreement. Thus, the new analytical method was shown to be very useful and effective.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권3호
• /
• pp.1-10
• /
• 2013

This study was performed to summarize application of ${\delta}^{13}C$, ${\delta}^{37}Cl$ and ${\delta}D$ of trichloroethylene (TCE) to studies on environmental forensic field regarding identification of TCE sources and evaluation of contribution of TCE to groundwater using data collected from literatures. ${\delta}^{13}C$, ${\delta}^{37}Cl$ and ${\delta}D$ of TCE give some information regarding sources of TCE because they show specific value according to manufacturing method. Also, TCE do not show a significant isotopic fractionation owing to adsorption and dilution. The isotopic fractionation mainly occurs by biodegradation. In addition, isotopic fractionation factor for TCE is different according to a kind of microorganism participated in biodegradation. However, the isotopic data of TCE have to be applied with chemical compositions of TCE and other hydrogeologic factors because isotopic fractionation of TCE is influenced by various factors.

• 한국환경과학회지
• /
• 제4권3호
• /
• pp.133-133
• /
• 1995

A comparative study on the chemical compositions of precipitations from February 1993 to April 1993 in Sungnam city of Kyunggi province, Inchon city, Kangneung city of Kangwon province, and Chongwon-gun of Chungbuk province has been performed. The metal cation and anion concentrations were measured by atomic absorption spectrometer and ion liquid chromatography, respectively. pH/Ion meter and direct nesslerization method were used for the concentration measurements of $H^+$ and $NH^{4+}$ ions, respectively. The quantitative orders of the cation and anion average concentrations, correlation coefficients between the ion concentrations, and pH values are used for chemical analysis on the environmental pollution and pollutant sources in the urban, surburban, seaside, and rural areas of the Korean Peninsula.

• Journal of Nutrition and Health
• /
• 제11권1호
• /
• pp.33-37
• /
• 1978

The effect of heating time (0 to 30 hours at $180{\pm}5^{\circ}C$) on the change of flow properties, fatty acid compositions and some other characteristics such as acid value, iodine value, peroxide value and density of purified edible rice bran oil were observed. flow properties were measured with Maron-Belner type capillary viscometer. Newtonian motion was observed in non-heated oil and the oil heated for 5 hours but non-Newtonian motion was observed in the oil heated for more than 10 hours and at high shear stress. The fatty acid compositions were analyzed by gas liquid chromatography and all the components of fatty acids were reduced in amounts with extention of heating time. The acid value, peroxide value and density were increased but iodine value were decreased with extension of heating time.

• Journal of Nutrition and Health
• /
• 제11권1호
• /
• pp.9-16
• /
• 1978

A Comparison of the analysis of the green and roast coffee of Arabica and Robusta compositions and regular instant coffee has been investigated by chromatography. The coffee oil were obtained by extracting the green and roast coffee with ethyl ether by soxhlet methood. Instant coffee samples were accurately weighted into 100ml beaker (ca. 0.5g regular coffee and 1.5g decaffeinated coffee) and add ca. 50ml water, heat and boil, remove from heat, and mechanically stried ca. 15min. and filtered of one sample and another sample were without filtrated and proceed with liquid chromatographic separation. The fatty acid compositions of green and roast coffee were compared by gas liquid chromatography and general chemical compositions of sample were analysed. Some similarities between green and roast coffee fatty acids were found in the case of green and roast coffee of both kinds acid methyl esters. They contained stearic, oleic, linoleic, and unknown fatty acid, and palmitic ana linoleic acid were rich.

• 한국자동차공학회논문집
• /
• 제2권2호
• /
• pp.49-58
• /
• 1994

A study on the performance of a Diesel engine with various intake gas compositions other than that of air are performed experimentally. In this study, the concentrations of each of oxygen, nitorgen, carbon dioxide, and argon are changed and their effects on the performance of the engine are investigated parametrically. The experiments are performed at constant engine speed condition, and main measured parameters are cylinder pressure, intake gas compositions, fuel consumption rate. Increase of oxygen concentration up to 24% improved the performance of the engine generally. The adverse effect was observed when the oxygen concentration was increased over 24%. Increase of carbon dioxide concentration degraded the performance of the engine, mainly due to the lower specific heat ratio of carbon dioxide. Adding argon gas to the intake gas improved the overall performance. Finally, it is found that two most influencing factors affecting the performance of the Diesel engine in this study of intake gas composition variation are ignition delay and specific heat ratio of the intake gas.

• 한국강구조학회 논문집
• /
• 제12권6호
• /
• pp.649-659
• /
• 2000

본 연구에서는 고장력 용접구조용 압연강재인 SM570을 건축구조용으로 사용하기 위해서 판두께에 따른 화학성분과 기계적 성질의 분포특성을 정량적으로 평가하였다. 또한 건축구조용 강재로 주로 사용되는 일반구조용 압연강재인 SS400과 용접구조용 압연강재인 SM490을 비교재로 사용해서 SM570 강재와 비교 평가하였다. 본 연구결과 모든 두께에서 SM570 강재의 화학성분, 탄소당량, 용접 갈라짐 감수성 조성과 항복강도, 인장강도, 연신률 및 충격강도는 한국산업규격을 만족하였다.

• 한국세라믹학회지
• /
• 제36권9호
• /
• pp.893-900
• /
• 1999

Silica films were prepared on Si single crystal substrates by sol-gel process using TEOS as starting materials. Films were fabricated by a spin coating technique. Sol solutions were prepared by varying the compositions of CH3OH, H2O and DMF with fixed molar ratio of TEOS=1, HCl=0.05(mol). Wetting behavior viscosity of solutions gelation time thickness of films and cracking behavior were investigated with the various solution compositions. Wetting behaviors of solutions depended on the solution compositions mixing method and mixing rate. The optimum composition of sol was TEOS : DMF ; CH3OH: H2O :HCl=1:2:4:4:0.05(mol) and the mixing rate of solution was optimized at 1 ml/min. Viscosity of solutions were controlled by choosing a reaction time(elapsed time after mixing) at a room temperature so that we could get up to 800nm thick film The surface roughness was getting poor when thickness of films was thicker than 500nm. Thickness of coated films were increased with decreasing amount of CH3OH. The best surface roughness was obtained at the content of CH3OH 4 mol. The shortest gelation time was obtained with the content of CH3OH 8 mol. Crack-free filkms were fabricated when sintered at 500$^{\circ}C$ for 1 hr with heating rate of 0.6$^{\circ}C$/min.