• Journal of the Semiconductor & Display Technology
• /
• v.4 no.3 s.12
• /
• pp.1-4
• /
• 2005

Silicon oxynitride films were deposited using ammonia as a nitrogen source via PECVD (plasma enhanced chemical vapor deposition) to study the physical properties of the films. Silane and nitrous oxide were used as silicon and oxygen sources, respectively. The composition of the silicon oxynitride films was well controlled by changing the ratios of the sources and confirmed by XPS. The silicon oxynitride films with high oxygen content showed bigger compressive stress and less refractive index, while the values of surface roughness were around 1 nm, irrespective of the variation of the source ratios.

• Steel and Composite Structures
• /
• v.37 no.2
• /
• pp.137-150
• /
• 2020

In this research work, the analytical rotating vibration for functionally graded shell with ring supports are restricted to some volume fraction laws based on Rayleigh-Ritz technique. The frequencies of functionally grade cylindrical shells have been investigated for the distribution of material composition of material with two kinds of material. Stability of a cylindrical shell depends highly on these aspects of material with ring supports. The frequency behavior is investigated with fraction laws versus circumferential wave number, length-to-radius and height-to-radius ratios. The frequencies are higher for higher values of circumferential wave number. The frequency first increases and gain maximum value with the increase of circumferential wave mode. Moreover, the effect of angular speed is also investigated. It is examined that the backward and forward frequencies increases and decreases on increasing the ratio of height- and length-to-radius ratios.

• Journal of the Korean earth science society
• /
• v.36 no.5
• /
• pp.447-459
• /
• 2015

Dok island comprises Pliocene volcanic products such as a series of volcanoclastic rocks and lavas ranging in composition from alkali basalts, and trachyandesites to trachytes. Compositional variation of the basaltic rocks can be attributed to fractional crystallization of olivine, clinopyroxene, plagioclase, and magnetite. Chemical variations among the trachyandesites are caused by fractionation of clinopyroxene, plagioclase, and magnetite with minor amphibole, while trachytes are controlled mainly by feldspar fractionation. Incompatible element abundance ratios and chondrite normalized LREE/HREE ratios (e.g., (La/Yb)c: 24.8 to 32.8 for basalts, 15.6 to 31.2 for trachyandesites) suggest that the origins of the basalts and trachyandesites involve both different degrees of partial melting and subsequent fractional crystallization processes. Trace element ratios of the basalts from Dok island are characterized by high Ba/Nb, La/Nb, Ba/Th and Th/U and isotopic ratios (Tasumoto and Nakamura, 1991) that are similar to the EM 1 type of oceanic island basalts such as Gough and Tristan da Cunha basalts.

• Progress in Superconductivity
• /
• v.13 no.1
• /
• pp.7-11
• /
• 2011

The effects of Sm:Ba:Cu composition ratio in SmBCO coated conductor on their superconducting properties were investigated. The SmBCO coated conductors were fabricated by reactive co-evaporation method using EDDC(Evaporation using Drum in Dual Chamber) system. In this system, we could obtain various samples with different composition ratios in a batch by the technique providing composition gradient at deposition zone. From the specimens prepared by EDDC system, we found that composition ratio is uniform parallel to the drum axis, but gradient along the circumferential direction of the drum. We installed a shield having parallelogram open area between the deposition chamber and the evaporation chamber in EDDC system, and attached a 30 cm long template, which is parallel to drum axis, onto the drum surface. In this configuration, we could obtain SmBCO coated conductors having a gradient composition along the length of template. We measured the composition ratios and surface morphologies with periodic interval by SEM and EDAX, and confirmed the profile of composition ratio. We also measured critical current using non-contact Hall probe critical current measurement system and thereby could plot composition ratio vs. critical current. The maximum critical current was obtained, and the surface morphology with the shape of roof tile was observed at the corresponding composition ratio of Sm:Ba:Cu = 1.01:1.99:4.87. It was also found that composition ratio had an effect on not only critical current but also surface morphology.

• Journal of Ecology and Environment
• /
• v.43 no.1
• /
• pp.14-21
• /
• 2019

Background: Stoichiometry plays an important role in understanding nutrient composition and cycling processes in aquatic ecosystems. Previous studies have considered C:N:P ratios constant for both DOM (dissolved organic matter) and POM (particulate organic matter). In this study, water samples were collected in the six major rivers in Korea and were incubated for 20 days. C:N:P ratios were determined during the time course of the incubations. This allowed us to examine the changes in N and P contents of organic matter during decomposition. Results: POM and DOM showed significant differences in N and P content and the elemental ratios changed during the course of decomposition; DOM showed higher C:N and C:P ratios than POM, and the C:N and C:P ratios increased during decomposition, indicating the preferential mineralization of P over N and N over C. Conclusions: The N and P contents of organic matter in aquatic ecosystem are far from constant and vary significantly during decomposition. More detailed information on the changes in C:N:P ratios will provide improved understanding of decomposition processes and improved modeling of aquatic ecosystems.

• Korean Journal of Community Nutrition
• /
• v.19 no.3
• /
• pp.274-282
• /
• 2014

Objectives: The objective of this study was to revise the target pattern in food guidance system for adolescents' balanced menu planning. Methods: The food groups in the target pattern were divided into detailed food items, and intake number were assigned to each food items based on the revised standard food composition table. The validity of revised target pattern was examined. Menu planning according to the revised target pattern was made available to 305 male and female middle school students and the nutritional assessment of the menu plan were carried out using SPSS WIN 12.0. Results: The energy contents, energy contribution ratios of carbohydrate, fat, and protein, and 4 minerals' and 6 vitamins' contents of the revised target pattern were adequate. The average energy contents of the menu planned according to revised target pattern were 400~500 kcal higher than that of the revised target pattern when the revised standard food composition was applied. The energy contribution ratios of fat were 28.9%, close to maximum of acceptable macronutrient distribution range (AMDR) (30%), and that of carbohydrate were 54.5%, lower than minimum of AMDR (55%). The nutrient adequacy ratios (NARs) of calcium and vitamin C were less than 1.0. According to index of nutritional quality (INQ) of food items, kimchi, milk dairy products, and soybean curd were energy efficient source for calcium, kimchi, fruit, vegetable and seaweed were energy efficient source for vitamin C, with INQ of food items were higher or close to 2.0. Kimchi was the best energy efficient source of calcium and vitamin C. Conclusions: Revised target pattern based on the adolescent's foods intake was not good enough for balanced menu planning by adolescents, because what they ate and what they wanted to eat were very much different. Detailed guidance for food selection is necessary in each food items.

• Corrosion Science and Technology
• /
• v.23 no.2
• /
• pp.154-165
• /
• 2024

Acetic acid and acetonitrile produced in the chemical process of petrochemical plants are used at high temperatures and pressures. They are exposed to harsh corrosive environments. The present investigation aimed to evaluate corrosion characteristics of metals with excellent corrosion resistance by performing immersion and electrochemical experiments with different composition ratios of acetic acid and acetonitrile in a high-temperature and high-pressure environment. Results of immersion experiment revealed that as acetic acid concentration increased, surface damage and corrosion also increased. In immersion experiments under all conditions, super austenitic stainless steel (UNS N08367) had the best corrosion resistance among various metals. The maximum damage depth under the most severe immersion conditions was observed to be 4.19 ㎛, which was approximately 25.25 ㎛ smaller than that of highly damaged stainless steel (UNS S31804). As a result of electrochemical experiments, electrochemical characteristics of various metals presented some differences with different composition ratios of acetic acid and acetonitrile. However, super austenitic stainless steel (UNS N08367) had the best corrosion resistance at a high pressure condition with a high concentration of acetic acid.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1015-1021
• /
• 2010

In this study, the effect of the C/SiC composition ratio on the impact damage of a reaction sintered SiC (RS-SiC) plates was evaluated. An impact test was conducted by using an air gun. The impacter used was a steel ball with a diameter of 2 mm, and the impact velocities were 113, 122, and 180 m/s. The RS-SiC plates were $20\times20\times3$ mm with different C/SiC composition ratios. The ring crack diameters damaged by a steel ball were determined using SEM images. It was observed that the maximum diameter increased with increasing impact velocity, and it rapidly changed with increasing C/SiC composition ratio because of the effect of residual Si and the variation flexural strength. Cone cracks were formed in the case of C/SiC composition ratios of 0.4~0.5, this indicated that the impact damage changed from a ring crack to a cone crack in this critical range of C/SiC composition ratios. The C/SiC composition ratio of 0.3 was determined to be the optimal ratio for the RS-SiC manufacturing process.

• Korean Journal of Ecology and Environment
• /
• v.52 no.4
• /
• pp.358-365
• /
• 2019

We measured the body composition, including bone mineral density (BMD) and food resource availability using dual energy X-ray absorptiometry and the carbon and nitrogen stable isotope ratios of body condition of 4 anuran species(Hyla japonica, Glandirana rugosa, Pelophylax nigromaculatus, Lithobates catesbeianus) in South Korea. Additionally, the carbon and nitrogen stable isotope ratios were employed to determine the food resource availability of anurans. We figured out the relationship between the body composition, including BMDs and food resource availability. The body composition and BMDs did not differ between male and female while there was difference among the species. Food resource availability and BMDs were the highest in L. catesbeianus, the lowest in H. japonica. BMDs tended to increase with higher food resource availability. Body composition and BMDs, which represent the body condition of an individual, can be used as an ecological indicator to assess the stability of the habitat of anurans.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.693-698
• /
• 2007

We have only one type of forest fertilizer involved a composition ratio of 12:16:4% (N:P:K). It is required to develop new fertilization ratios which are suitable to soil environmental conditions and seedling growth characteristics. This study was carried out to determine change of seedlings growth on different fertilizer composition ratios. Two coniferous seedlings (2-year old Pinus densiflora Sieb. et Zucc., 2-year old Larix leptolepis Gordon) and two deciduous seedlings (2-year old Quercus acutissima Carruth., 1-year old Betula platyphylla var. japonica Hara) were planted in pots (about 30 l) and the seedling growth responses after composition ratio treatments (N:P:K, 2:2:1, 3:4:1, 3:8:1, 6:4:1, 3:4:2, control) with 30g fertilizer were measured for three-year study period. Growth of height and root collar diameter of two coniferous seedlings was highest in 3:8:1 ratio compared with other fertilizer composition treatments or control, while there was not significantly different among fertilizer composition ratios except for 2:2:1 and 3:4:1 ratios. Height growth of two deciduous seedlings was highest in 3:8:1 ratio compared with other fertilizer composition treatments or control, while growth of root collar diameter showed the highest values in 6:4:1 ratio. The results indicated that the growth of four tree seedling types were better in 3:8:1 or 6:4:1 ratios than in 2:2:1 or 3:4:1 ratios.