• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.109-112
• /
• 1995

CuInS$_2$thin film was prepared by heat treatment at vacuum 10$\^$-3/ Torr of S/In/Cu stacked layer which was deposited by sequential. And so, the polycrystalline CuInS$_2$with chalcopyrite structure was well made at heat treatment temperature of 250$^{\circ}C$ and heat treatment time of 60 min. Single phase of CuInS$_2$was formed from Cu/In composition ratio of 0.84 to 1.3. p conduction type of CuInS$_2$thin film was appeared from Cu/In competition ratio of 0.99. The highest resistivity of CuInS$_2$with p type was 1.608${\times}$10$^2$$\Omega$cm at Cu/In composition ratio of 0.99 and The lowest resistivity was 5.587${\times}$10$\^$-2/$\Omega$cm at Cu/In composition ratio of 1.3.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.273.1-273.1
• /
• 2014

Graphene, a two dimensional plane structure of $sp^2$ bonding, has been promised for a new material in many scientific fields such as physics, chemistry, and so on due to the unique properties. Chemical vapor deposition (CVD) method using transitional metals as a catalyst can synthesize large scale graphene with high quality and transfer on other substrates. However, it is difficult to control the number of graphene layers. Therefore, it is important to manipulate the number of graphene layers. In this work, homogeneous solid solution of Cu and Ni was used to control the number of graphene layers. Each films with different thickness ratio of Cu and Ni were deposited on $SiO_2/Si$ substrate. After annealing, it was confirmed that the thickness ratio accords with the composition ratio by X-ray diffraction (XRD). The synthesized graphene from CVD was analyzed via raman spectroscopy, UV-vis spectroscopy, and 4-point probe to evaluate the properties. Therefore, the number of graphene layers at the same growth condition was controlled, and the correlation between mole fraction of Ni and the number of graphene layers was investigated.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.331-338
• /
• 2014

In this research, split-type complex yarn of 20:80, 40:60, 50:50 nylon6/polyester composition ratio was used in order to impose unique sense on split-type complex woven. After treating both split-type complex yarn of each ratio and its produced woven in alkali solution, we got the following results by checking physical properties based on alkali proportion and treatment time. Under the condition of NaOH 20% in this experiment, it took approximately double time 20% loss of weight. The loss of weight became high when polyester proportion of N/P(nylon6/polyester) composition ratio was low, in the same fineness yarn. Even though polyester proportion was low, the loss of weight was low when the fineness was high. N/P division was well processed at about 25% loss of weight under the condition of NaOH 20%, treatment temperature $50^{\circ}C$, and treatment time 60 minutes. The research provides that the loss of weight should be processed around treatment time 24 hours in the case of NaOH concentration 15%, and treatment time 15 hours in the case of NaOH concentration 18%, respectively, in order to achieve N/P woven division ratio of about 70%-80% in industrial fields.

• 한국환경과학회지
• /
• 제21권10호
• /
• pp.1265-1274
• /
• 2012

This study was conducted to investigate the extraction characteristics including total polyphenol compound content (TPC) and the antioxidative effect of Rumex crispus root extract on commercial corn oil. Extraction yield was increased with extraction temperature but decreased with extraction ratio. No significant differences in aromatics content were found among the extracts prepared with various extraction conditions; extraction ratio, extraction temperature, extraction pH and composition of extractant. Total flavonoid content of the extract was increased with extraction temperature and extraction pH, and highest value of it was found when extractant composition of ethanol in water was 75%. Total polyphenol compound content (TPC) of the extract with 10 fold extraction ratio showed the highest value, but no significant difference in TPC was found with extraction temperature. Reducing power and DPPH (${\alpha}$,${\alpha}$-diphenyl-${\beta}$-picrylhydrazyl) radical scavenging ability (RSA) of the extract in spectrophotometric absorbance were decreased with extraction ratio but increased with extraction temperature and showed 63.1%~98.4% and 67.6%~86.7% of those of ascorbic acid in reducing power and DPPH RSA, respectively. The antioxidative effects of the extract on corn oil were 84.8~93.0% of that of commercial butylated hydroxytoluene, the antioxidant index value was highest when the ethanol composition to water in extractant was equal ratio.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2005년도 추계학술대회 논문집
• /
• pp.189-192
• /
• 2005

The purpose of this study is to analyze space composition and size of the Master Zone in the apartment unit plan. For this, we analyzed 435 samples by searching web-sites of the 5 main construction companies. The major results of this study are as follows. 1) Master Zone is organized 4 spaces such as main room, bathroom and make-up & dress room. Six types of Master Zone are classified with the composition of 4 spaces. 2) The size of the Master Zone is increased in proportion to the square meter. But the range of the ratio is small range of fluctuation as 20%${\sim}$30%. 3)The size and ratio of the each spaces of the Master Zone are analyzed. The size of bedroom is increased but the ratio is decreased. The size of bathroom is increased but the ratio is regular as 4%${\sim}$5%. The size of make-up and dressing room is generally increased but the range of the size and ratio is the most extensive. Through this analysis and research, this study would be provied the basic data for actual housing planning and to contribute to future trends of apartment houses.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.318-323
• /
• 2003

In order to polish complicated shaped inner surfaces of molds, a new polishing method with consolation liquid was Invented The MAGIC (MAGnetic Intelligent Compound) Polishing is the best method, a countermeasure of polishing trouble that is reduce of productivity and instability of quality. But because MAGIC polishing is new polishing method there is no study of the standardization of polishing by MAGIC wheel yet. So we want to standadize MAGIC polishing condition. For the First time, we will evaluate the influence of composition ratio and kind of polishing grain in polishing surface roughness. In this study, we determined amount of dressing oil and dressing point as kind and composition ratio of polishing grain. we compared surface roughness case by case

• 대한한의학회지
• /
• 제22권4호
• /
• pp.114-120
• /
• 2001

Objectives : Man adapts himself to nature, so accordingly as he grows up, changes of body composition appear. This study measured the changes of body compositions on the ground of Sasang constitution and seasons Methods : 253 middle school students who live in Busan were studied from the 20th of March, 1999 to the 20th of March, 2001. We measured height and body compositions with Inbody 3.0, six times during that period. Results : According as they grew up, total body water, muscle area, body weight, BMI (Body Mass Index), BMR (Basal Metabolic Rate), ACM (Arm Muscle Circumference), and BCM (Body Cell Mass) increased, but fat body weight ratio decreased. From March to June, total body water, muscle area, height, ACM, and BCM increased. From September to December fat body weight, fat body weight ratio, waist hip ratio increased as compared with other seasons. Height of Soyangin and BMI of both Soyangin and Taeumin increased more than those of other groups, with statistical significance Conclusions : The growth of man is adapting oneself to changes of nature, and it corresponds to the theory of (correspondence between man and universe).

• E2M - 전기 전자와 첨단 소재
• /
• 제7권4호
• /
• pp.281-288
• /
• 1994

According to spread volume of B(BiPbCuO) layer, composition ratio and each stage of sintering process, we studied stability of high Tc superconductor phase and generation and growth movement of superconducting phase. The dual layer composed of SrCaCuO and BiPbCuO compound were prepared to develop the Bi-2223 superconductor[108K] through interaction and diffusion during sintering process. The dual layer samples were sintered at 830.deg. C for 0-210 hours. From the result, the optimum conditions were : spread volume(A:B=1:0.6), sintering time(210h) and composition ratio(A:S $r_{2}$C $a_{2}$C $u_{2}$- $O_{x}$, B:B $i_{1.9}$P $b_{0.5}$C $u_{3}$ $O_{y}$) at 830.deg. C.. C.C.C.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.442-445
• /
• 2012

The quantum dots (QD) have unique electrical and optical properties due to quantum dot confinement effect. The optical properties of QDs are decided by various synthesis conditions. In a prior QDs study, a study on the QDs size with synthesis condition such as synthesis time and temperature is being extensively researched. However, the research on QDs size with composition ratio has hitherto received scant attention. In order to evaluate the ratio dependence of CdSe crystal, synthesis ratio of Se precursor is changed from 16.7 mol%Se to 44 mol%Se. As the increasing Se ratio, the band gap was increased. This is caused by red shift of emission. We confirmed optical property of CdSe QDs with composition ratio.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.30-31
• /
• 2006

We have fabricated SmBCO coated conductor on IBAD-MgO substrates using unique co-evaporation method. The batch type co-deposition system was specially designed and named as EDDC(evaporation using drum m dual chamber) that is possible to deposit superconducting layer with different composition ratio at low temperature of $700^{\circ}C$. In this study, we have investigated the influence of SmBCO phase composition and texture of IBAD-MgO template on the critical current density. We have changed the deposition rates of Sm, Ba and Cu during co-evaporation to examine the optimal composition ratio shown better critical current density. The composition ratio and surface morphology of SmBCO coated conductors were analyzed by the EDX and SEM, respectively. A higher critical current density was measured at superconducting phase composition ratio of Ba deficiency, Sm or Cu rich compared to the Sm1Ba2Cu3Ox stoichiometry.