• 한국응용과학기술학회지
• /
• 제21권2호
• /
• pp.132-139
• /
• 2004

Film forming behavior of monodispersed model composite latexes with particle size of 190 nm, which consist of n-butyl acrylate as a soft phase monomer and methyl methacrylate as a hard phase monomer with different morphology was examined. Five different types of model latexes were used in this study such as random copolymer particle, soft-core/hard-shell particle, hard-core/soft-shell particle, gradient type particle, and mixed type particle. The film forming behavior was evaluated using pseudo on-line measurements of the cumulative weight loss, the UV transmittance, and the tensile fracture energy. Each stages of film formation I, II were not sensitive to the morphology of model latexes, but stage-ill was largely dependent on the morphology of model latexes. The chain mobility of polymer which composed the shell component was found to dominantly determine the behavior of film forming stage-III.

• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.259-266
• /
• 2004

Film properties of monodispersed model composite latexes with particle size of 190 nm, which consist of n-butyl acrylate as a soft phase monomer and methyl methacrylate as a hard phase monomer with different morphology was examined. Five different types of model latexes were used in this study such as random copolymer particle, soft-core/hard-shell particle, hard-core/soft-shell particle, gradient type particle, and mixed type particle. Tensile strength and tensile elongation at break of final films were evaluated. Those properties can be interpreted in terms of PBA/PMMA phase ratio and their morphology. The interfacial adhesion strength was also evaluated using $180^{\circ}$ peel strength measurement and cross hatch cutting test.

• Elastomers and Composites
• /
• 제46권1호
• /
• pp.60-69
• /
• 2011

[ $2.1\;{\mu}m$ ]입자경의 단분산 PBA seed를 이용한 2단계 분산중합을 seeded batch process 와 seeded semi-continuous process를 이용하여 다양한 형태의 PBA/PMMA composite 미립자를 제조하였다. Batch process의 경우 PBA/PMMA composite 입자의 모폴로지는 중합 분산매인 methanol/water 비와 중합 2단계에서의 PBA seed/MMA단량체의 비에 따라 크게 영향을 받으며, methanol/water 중합분산매중 물의 량이 증가함에 따라, 그리고 중합 2단계에서 MMA단량체량이 증가함에 따라 PBA와 PMMA간의 상분리현상이 심화되어 구형의 입자로부터 egg, snowman, confetti, peanut와 같은 비구형의 PBA/PMMA composite 입자들이 제조되었다. Semi-continuous process의 경우 단량체 부가시간을 조절함으로서 PBA/PMMA composite 입자의 모폴로지가 변함을 발견하였고 특히, 단량체의 결핍된 조건하에서 구형의 PBA(코어)/PMMA(쉘) composite 라텍스가 제조되었다.

• 한국응용과학기술학회지
• /
• 제21권1호
• /
• pp.69-75
• /
• 2004

In this study, various model composite latexes were synthesized using n-butyl acrylate and methyl methacrylate as comonomers by seeded multi-staged emulsion polymerization. Monodispersed model composite latex particles with size of 190 nm and polydispersity index of 1.05, which have various morphology including random copolymer particle, soft-core/hard-shell particle, hard-core/soft shell particle, and gradient-type copolymer particle, homopolymers particles were prepared. The designed morphology of model composite particles were confirmed.

• Computers and Concrete
• /
• 제18권2호
• /
• pp.279-295
• /
• 2016

A new innovative composite material is textile reinforced cementitious composite (TRCC). To achieve high flexural performance researchers suggest polymer modification of TRCC matrices. In this study, nine ready mix repair mortars commonly used in construction industry and the production of TRCC elements were examined. Mechanical properties such as compressive and flexural strength, drying shrinkage were studied. Being a significant durability concern, alkali silica reaction tests were performed according to related standards. Results showed that, some ready repair mortar mixes are potentially reactive due to the alkali silica reaction. Two of the ready mortar mixes labelled as non-shrinkage in their technical data sheets showed the highest shrinkage. In this experiment, researchers designed new matrices. These matrices were fine grained concretes modified with polymer additives; latexes and redispersible powders. Two latexes and six redispersible powder polymers were used in the study. Mechanical properties of fine grained concretes such as compressive and flexural strengths were determined. Results showed that some of the fine grained concretes cast with redispersible powders had higher flexural strength than ready mix repair mortars at 28 days. Matrix composition has to be designed for a suitable consistency for planned production processes of TRCC and mechanical properties for load-carrying capacity.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.47-53
• /
• 2004

Emulsion polymerization ws carried out using Alkyl methacrylate(RMA) like MMA, EMA, BMA and Styrene Monomer(SM) for core-shell latex preparation. It was synthesized at $80^{\circ}C$ in the presence of anionic surfactant SLS(Sodium Lauryl Sulfate). FT-IR and DSC analysis are used to confirm the synthesized core-shell emulsion latexes. Moreover DSC and TGA were used to investigate the thermal characterisitcs of them. The differences of the decomposition rate and the activation energy from TGA and DSC analysis are not so big. It considers that the pendent group is not affect of the thermal characteristics and stability on core-shell latexes, which is synthesized with RMA and Styrene. For investigating combustion products, LC50 values were calculated by FED(Fractional Effective Dose)from the Pyrolyzer-Mass sepctrometer.

• 폴리머
• /
• 제25권5호
• /
• pp.617-624
• /
• 2001

음이온계 유화제를 사용하여 monomer pre-emulsion을 제조한 다음 ammonium persulfate를 개시제로 하여 단계 중합법에 의해 새로운 입자의 생성이 적고 중합 과정에서 안정성이 우수한 poly(methyl methacrylate)(PMMA)/polystyrene (PSt) 라텍스를 제조하였다. 본 연구에서는 shell 중합시에 새로운 입자의 생성이 적고 중합 중 안정성이 우수한 라텍스를 제조하기 위해 개시제농도, 유화제농도, 중합온도가 PMMA/PSt와 PSt/PMMA의 core-shell 구조에 미치는 영향을 알아보았다. 중합한 라텍스를 입도분석기 (particle size analyzer: PSA) 및 투과전자현미경(transmission electron microscope; TEM)을 이용하여 실제 입자측정과 입자형태 특성을 확인하였으며 시차주사열량계 (differential scanning calorimeter, DSC)를 이용하여 유리전이온도($T_g$)의 측정, 필름 조막성 (minimum film formation temperature: MFFT), NaOH 첨가에 의한 가수 분해에 따르는 pH를 측정하여 core-shell의 또 다른 특성을 확인하였다.

• 한국응용과학기술학회지
• /
• 제19권2호
• /
• pp.131-136
• /
• 2002

As model waterborne acrylic coatings, mono-dispersed poly(butyl acrylate-methyl methacrylate) copolymer latexes of random copolymer and core/shell type graft copolymer were prepared by seeded multi-staged emulsion polymerization with particle size of $180{\sim}200$ nm using semi-batch type process. Sodium lauryl sulfate and potassium persulfate were used as an emulsifier and an initiator, respectively. The effect of particle texture including core/shell phase ratio, glass transition temperature and crosslinking density, and film forming temperature on the film formation and final properties of film was investigated using SEM, AFM, and UV in this study. The film formation behavior of model latex was traced simultaneously by the weight loss measurement and by the change of tensile properties and UV transmittance during the entire course of film formation. It was found that the increased glass transition temperature and higher crosslinking degree of latex resulted in the delay of the onset of coalescence of particles by interdiffusion during film forming process. This can be explained qualitatively in terms of diffusion rate of polymer chains. However, the change of weight loss during film formation was insensitive to discern each film forming stages-I, II and III.

• 방사성폐기물학회지
• /
• 제9권2호
• /
• pp.81-86
• /
• 2011

폴리머 시멘트 고화체는 일반 몰타르 내의 시멘트 수화물을 폴리머 개질제를 이용하여 부분적으로 대체함으로써 그 기능을 강화시킨 복합재료로써, 특히 시멘트 몰타르에 폴리머를 첨가하는 것은 그 화학적 내구성을 향상시킨다고 알려져 있다 따라서 본 연구에서는 고화재료로서의 폴리머 시멘트에 대한 낮은 침투성 및 낮은 이온 확산도 등과 같은 향상된 화학적 내구성을 확인하기 위하여 폴리머 시멘트 시편들을 제조하였다. 이때 폴리머의 함량은 0 에서부터 30%까지 변화시켰으며, 물에 대한 시멘트 비 (W/C)를 33%와 50%로 각각 유지 시켰다. 충분히 경화시킨 후에, 제조된 시편들에 대한 구조적 건전성을 압축강도와 수침법에 의한 공극도를 통하여 평가하였다. 그 결과, W/C 비가 33%이고, 폴리머 함량이 약 10%인 폴리머 시멘트 시편에서 가장 향상된 개질변화를 얻을 수 있었다. 끝으로 이 최적의 조합비를 가지는 시편에 대하여 ANS 16.1에 따르는 침출시험을 수행하였으며, 그 결과를 일반 시멘트 고화체와 비교하였다.