• Steel and Composite Structures
• /
• 제43권5호
• /
• pp.673-688
• /
• 2022

Post-earthquake fire is a major threat since most structures are designed allowing some damage during strong earthquakes, which will expose a more vulnerable structure to post-earthquake fire compared to an intact structure. A series of experimental research on steel-concrete composite beam-to-column joints subjected to fire after cyclic loading has been carried out and a clear reduction of fire resistance due to the partial damage caused by cyclic loading was observed. In this paper, by using ABAQUS a robust finite element model is developed for exploring the performance of steel-concrete composite joints in post-earthquake fire scenarios. After validation of these models with the previously conducted experimental results, a comprehensive numerical analysis is performed, allowing influential parameters affecting the post-earthquake fire behavior of the steel-concrete composite joints to be identified. Specifically, the level of pre-damage induced by cyclic loading is regraded to deteriorate mechanical and thermal properties of concrete, material properties of steel, and thickness of the fire protection layer. It is found that the ultimate temperature of the joint is affected by the load ratio while fire-resistant duration is relevant to the heating rate, both of which change due to the damage induced by the cyclic loading.

• Steel and Composite Structures
• /
• 제33권2호
• /
• pp.277-298
• /
• 2019

Concrete filled steel tubular (CFST) column joints with composite beams have been widely used as lateral loading resisting elements in civil infrastructure. To better utilize these innovative joints for the application of structural seismic design and analysis, it is of great importance to investigate the dynamic behavior of the joint under cyclic loading. With this aim in mind, a novel phenomenal model has been put forward in this paper, in which a Bouc-Wen hysteresis component is employed to portray the strength and stiffness deterioration phenomenon caused by increment of loading cycle. Then, a modified chicken swarm optimization algorithm was used to estimate the optimal model parameters via solving a global minimum optimization problem. Finally, the experimental data tested from five specimens subjected to cyclic loadings were used to validate the performance of the proposed model. The results effectively demonstrate that the proposed model is an easy and more realistic tool that can be used for the pre-design of CFST column joints with reduced beam section (RBS) composite beams.

• Steel and Composite Structures
• /
• 제38권3호
• /
• pp.319-336
• /
• 2021

To achieve a rational detail of the girder-abutment joints in composite integral bridges, and validate the performance of the joints with perfobond connectors, this paper proposes two innovative types of I-shaped steel girder-concrete abutment joints with perfobond connectors intended for the most of bearing capacity and the convenience of concrete pouring. The major difference between the two joints is the presence of the top flange inside the abutments. Two scaled models were investigated with tests and finite element method, and the damage mechanism was revealed. Results show that the joints meet design requirements no matter the top flange exists or not. Compared to the joint without top flange, the initial stiffness of the one with top flange is higher by 7%, and the strength is higher by 50%. The moment decreases linearly in both types of the joints. At design loads, perfobond connectors take about 70% and 50% of the external moment with and without top flange respectively, while at ultimate loads, perfobond connectors take 53% and 26% of the external moment respectively. The ultimate strengths of the reduced sections are suggested to be taken as the bending strengths of the joints.

• Steel and Composite Structures
• /
• 제3권5호
• /
• pp.349-369
• /
• 2003

The paper concerns the modelling of rigid and semi-rigid steel-concrete composite joints under monotonic loading through use of the Abaqus program, a widespread finite element code. By comparing numerical and experimental results obtained on cruciform tests, it is shown that the proposed modelling allows a good fit of the global joint response in terms of moment-rotation law. Even the local response in terms of stresses and strains is adequately predicted. Hence, this numerical approach may represent a useful tool for attaining a better understanding of experimental results. It may also be used to perform parametric analyses and to calibrate simplified mechanical models for practical applications.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.1980-2000
• /
• 1993

The stresses and torque transmission capabilities of adhesively bonded circular, hexagonal and elliptical lap joints were analyzed by the finite element and compared with the experimental results. The adherends of the joints were composed of carbon fiber/epoxy composite shafts and steel shafts. In calculating the torque transmission capabilities, the linear laminate properties of the composite material and the nonlinear shear properties of the adhesive were used. Using this method, the torque transmission capabilities of adhesively bonded lap joints could be obtained within 10% error compared to the experimental results except some single lap joints. The experiments revealed that the hexagonal joint had the best torque transmission capability from the single lap joints and the double lap joint had better torque transmission than the single lap joint.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.95-98
• /
• 2001

Co-cured joining method is an efficient joining technique because both curing and bonding processes for the composite structures can be achieved simultaneously. It requires neither an adhesive nor a surface treatment of the composite adherend because the excess resin, which is extracted from composite materials during consolidation, accomplishes the co-cured joining process. In this paper, we considered three bond parameters, affecting tensile load bearing capacity of the co-cured single and double lap joints. Filially, we nave presented optimal bonding conditions for co-cured single and double lap joints with steel and composite adherends under tensile loads.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.73-77
• /
• 2004

Failure predictions of composite single-lap bonded joints were performed considering both of composite adherend failure and bondline failure. An elastic-perfectly plastic model of adhesive and a delamination failure criterion are used. The failure prediction results such as failure mode and strength have very good agreements with the test results of joint specimens with various bonding methods and parameters. The influence of variations in the effective strength (that is, adhesion performance) and plastic behavior of adhesive on the failure characteristics of composite bonded joints are investigated numerically. The numerical results show that optimal joint strength is archived when adhesive and delamination failure occur in the same time.

• Steel and Composite Structures
• /
• 제1권3호
• /
• pp.355-376
• /
• 2001

An experimental research program on end-plate beam-to-column composite joints under cyclic loading is presented. The major focus relates to the identification of the contribution of the concrete confinement in composite columns to the behaviour of the joint, on internal nodes and external nodes, together with an assessment of degradation of strength and stiffness in successive loading cycles. From the experimental results it was possible to identify the various failure modes and to fit the corresponding hysteretic curves to the Richard-Abbott and Mazzolani models. These curve-fitting exercises highlighted the need to adapt both models, either for improved ease of application, or to deal with some aspects previously not covered by those models.

• 마이크로전자및패키징학회지
• /
• 제22권3호
• /
• pp.39-44
• /
• 2015

이방성 전도접착제를 이용하여 Cu/Au 칩 범프를 Cu 기판 배선에 플립칩 실장한 접속부에 대해 CNT-Ag 복합패드가 접속저항에 미치는 영향을 연구하였다. CNT-Ag 복합패드가 내재된 플립칩 접속부가 CNT-Ag 복합패드가 없는 접속부에 비해 더 낮은 접속저항을 나타내었다. 각기 25 MPa, 50 MPa 및 100 MPa의 본딩압력에서 CNT-Ag 복합패드가 내재된 접속부는 $164m{\Omega}$, $141m{\Omega}$ 및 $132m{\Omega}$의 평균 접속저항을 나타내었으며, CNT-Ag 복합패드를 형성하지 않은 접속부는 $200m{\Omega}$, $150m{\Omega}$ 및 $140m{\Omega}$의 평균 접속저항을 나타내었다.

• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.765-770
• /
• 2014

본 논문에서는 복합재 대차프레임 볼트 체결부의 내구성 향상 방안에 대한 연구를 다루고 있다. 이를 위해, 인서트와 나사산 유무에 따른 3가지 경우를 고려하여 볼트 체결부에 대한 시험 및 해석을 통해 인서트 형태 및 유무에 미치는 영향을 평가하였다. 제안된 볼트 체결부의 구조 성능은 ASTM D5961에 의거한 시험을 통해 비교 평가하였다. 시험결과, 나사산이 없는 인서트를 갖는 볼트 체결부가 가장 적합한 것으로 확인되었다. 또한, 볼트 체결부를 고려한 복합재 대차프레임에 대한 구조 안전성 평가를 JIS E 4207에 의거하여 유한요소해석을 통해 평가하였다. 복합재 구조물은 Tsai-Wu 파손기준식에 의해 파손평가를 적용하였고, 볼트 체결부와 같은 금속재 구조물은 Von-Mises 파손기준식에 의해 평가하였다. 이때, 볼트 체결부의 경우에는 상세한 구조해석 결과 검토를 위해 서브모델링 기법을 적용하였다. 구조해석결과, 나사산이 없는 인서트가 적용된 볼트 체결부의 경우에는 볼트 체결부 주위의 복합재 구조물에 발생하는 Tsai-Wu 파손지수가 다른 경우에 비해 약 50% 감소하는 경향을 보였는데, 이는 나사선이 없는 인서트 형상이 복합재 대차프레임 볼트 체결부의 내구성을 향상시킬 수 있을 것으로 판단된다.