Browse > Article
http://dx.doi.org/10.12989/scs.2021.38.3.319

An investigation on the bearing capacity of steel girder-concrete abutment joints  

Liang, Chen (Department of Bridge Engineering, Tongji University)
Liu, Yuqing (Department of Bridge Engineering, Tongji University)
Zhao, Changjun (Zhejiang Provincial Institute of Communications Planning, Design & Research)
Lei, Bo (Zhejiang Provincial Institute of Communications Planning, Design & Research)
Wu, Jieliang (Zhejiang Provincial Institute of Communications Planning, Design & Research)
Publication Information
Steel and Composite Structures / v.38, no.3, 2021 , pp. 319-336 More about this Journal
Abstract
To achieve a rational detail of the girder-abutment joints in composite integral bridges, and validate the performance of the joints with perfobond connectors, this paper proposes two innovative types of I-shaped steel girder-concrete abutment joints with perfobond connectors intended for the most of bearing capacity and the convenience of concrete pouring. The major difference between the two joints is the presence of the top flange inside the abutments. Two scaled models were investigated with tests and finite element method, and the damage mechanism was revealed. Results show that the joints meet design requirements no matter the top flange exists or not. Compared to the joint without top flange, the initial stiffness of the one with top flange is higher by 7%, and the strength is higher by 50%. The moment decreases linearly in both types of the joints. At design loads, perfobond connectors take about 70% and 50% of the external moment with and without top flange respectively, while at ultimate loads, perfobond connectors take 53% and 26% of the external moment respectively. The ultimate strengths of the reduced sections are suggested to be taken as the bending strengths of the joints.
Keywords
fully integral abutment bridge (FIAB); girder-abutment joint; bearing capacity; composite girder; experimental test;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 ABAQUS (2010), Analysis User's Manual; (version 6.10), Hibbitt, Karlsson & Sorensen, USA.
2 Homma, K. and Hirata, H. (2001), "An Experimental Study on Steel Girder-RC Abutment Connection using Perfobond Ribs", J. Struct. Eng. JSCE, 8(30), 23-30. https://doi.org/10.11273/jssc1994.8.23. (in Japanese).   DOI
3 Itani, A.M. and Pekcan, G. (2011), "Seismic Performance of Steel Plate Girder Bridges with Integral Abutments", Report No. FHWA-HIF-11-043; University of Nevada, Nevada, USA.
4 Kim, S.H., Yoon, J.H., Kim, J.H., Choi, W.J. and Ahn, J.H. (2012), "Structural details of steel girder-abutment joints in integral bridges: An experimental study", J. Constr. Steel Res., 70, 190-212. https://doi.org/10.1016/j.jcsr.2011.07.009.   DOI
5 ACI 318 (2008), Building Code Requirements for Structure Concrete (ACI 318-08) and Commentary (ACI 318R-08); American Concrete Institute; Farmington Hills, MI, USA.
6 Liang, C., et al. (2018), "Experimental and numerical study on an innovative girder-abutment joint in composite bridges with integral abutments", Constr. Build. Mater., 186, 709-730. https://doi.org/10.1016/j.conbuildmat.2018.07.208.   DOI
7 Kim, W., Jeong, Y. and Lee, J. (2018), "A design approach of integral-abutment steel girder bridges for maintenance", Steel Compos. Struct., 26(2), 227-239. https://doi.org/10.12989/scs.2018.26.2.227.   DOI
8 Kunin, J. and Alampalli, S. (2000), "Integral Abutment Bridges: Current Practice in United States and Canada", J. Perform. Constr. Fac., 14(3), 104-111.   DOI
9 Lee, J., et al. (2016), "Strengthened and flexible pile-to-pilecap connections for integral abutment bridges", Steel Compos. Struct., 20(4), 731-748. http://dx.doi.org/10.12989/scs.2016.20.4.731.   DOI
10 Lin, Z., Liu, Y. and He, J. (2015), "Static behaviour of lying multi-stud connectors in cable-pylon anchorage zone", Steel Compos. Struct., 18(6), 1369-1389. https://doi.org/10.12989/scs.2015.18.6.1369.   DOI
11 Lin, Z., Liu, Y. and Roeder, C.W. (2016), "Behavior of stud connections between concrete slabs and steel girders under transverse bending moment", Eng. Struct., 117, 130-144. https://doi.org/10.1016/j.engstruct.2016.03.014.   DOI
12 Collin, P. (1996), "Some trends in Swedish bridge construction." Weld. World, 38, 161-170.
13 AISI Highway strucutres design handbook (1996), Integral Abutments for Steel Bridges; American Iron and Steel Institute; USA.
14 Ashiduka, K., Miyata, H., Sakate, M., Kiso, S. and Kurita, A. (2007), "Design of hybrid frame bridge having spread foundation and proposal for rationalization of connection detail between steel girder and RC abutment", J. Struct. Eng. JSCE, 53A, 936-945. https://doi.org/10.11532/structcivil.53A.936. (in Japanese)   DOI
15 Briseghella, B. and Zordan, T. (2015), "An innovative steel-concrete joint for integral abutment bridges", J. Traffic Transp. Eng., 2(4), 209-222. https://doi.org/10.1016/j.jtte.2015.05.001.   DOI
16 Elmy, M.H. and Nakamura, S. (2017), "Static and seismic behaviours of innovative hybrid steel reinforced concrete bridge", J. Constr. Steel Res., 138, 701-713. http://dx.doi.org/10.1016/j.jcsr.2017.08.025.   DOI
17 Feldmann, M., et al. (2012), Economic and Durable Design of Composite Bridges with Integral Abutments, European Commission, Luxembourg.
18 Feng, P., Cheng, S., Bai, Y. and Ye, L. (2015), "Mechanical behavior of concrete-filled square steel tube with FRP-confined concrete core subjected to axial compression", Compos. Struct., 123, 312-324. https://doi.org/10.1016/j.compstruct.2014.12.053.   DOI
19 He, J., Liu, Y., Chen, A. and Yoda, T. (2010), "Experimental study on inelastic mechanical behaviour of composite girders under hogging moment", J. Constr. Steel Res., 66(1), 37-52. https://doi.org/10.1016/j.jcsr.2009.07.005.   DOI
20 Lima, J.M. and Brito, J. (2009), "Inspection survey of 150 expansion joints in road bridges", Eng. Struct., 31, 1077-1084. https://doi.org/10.1016/j.engstruct.2009.01.011.   DOI
21 Monzon, E.V., Itani, A.M. and Pekcan, G. (2014), "Seismic behavior and design of steel girder bridges with integral abutments", Bridge Struct., 10, 117-128. https://doi.org/10.3233/BRS-150080.   DOI
22 VTrans IAC (2008), Integral Abutment Bridge Design Guidelines, Agency of Transportation, Montpelier, Vermont, USA.
23 Pak, D., Bigelow, H. and Feldmann, M. (2017), "Design of composite bridges with integral abutments", Steel Constr., 10(1), 23-30. https://doi.org/10.1002/stco.201710006.   DOI
24 Petursson, H. and Collin, P. (2006), "Innovative solutions for integral abutments", International Workshop on the Bridges with Integral Abutments, Lulea, Sweden, May.
25 Petursson, H., Collin, P., Veljkovic, M. and Andersson, J. (2011), "Monitoring of a Swedish integral abutment bridge", Struct. Eng. Int., 21(2), 175-180. https://doi.org/10.2749/101686611X12994961034291.   DOI
26 Way, J.A. and Yandzio, E. (1997), Integral Steel Bridges: Design of a Single-Span Bridge - Worked Example, The Steel Construction Institute, Ascot, Berkshire, UK.
27 White, H., Petursson, H. and Collin, P. (2010), "Integral Abutment Bridges: The European Way." Pract. Period. Struct. Des. Constr., 15(3), 201-208. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000053.   DOI
28 Zheng, S., Liu. Y., Yoda, T. and Lin, W. (2016), "Shear behavior and analytical model of perfobond connectors", Steel Compos. Struct., 20(1), 71-89. http://dx.doi.org/10.12989/scs.2016.20.1.071.   DOI