• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.924-925
• /
• 2008

There are many types of grid-connected inverter controllers, PI controller based is the most popular methods. But, a common PI control is produced zero-steady state error and phase delay in sinusoidal reference. Synchronous reference frame or DQ transform based controller is capable for reducing both of zero-steady state error and phase delay is. But DQ transform based controller has cross-coupling component which difficult to analyze the system in single phase model. In this paper, to obtained single phase model of the system, DQ transform based controller is analyzed in two techniques. The first is by neglecting cross-coupling. The second is eliminated cross-coupling component by decoupling method. By these two techniques, single phase model is obtained. Then, the single phase model is analyzed to evaluate its performance in stability and frequency response, through Root Locus and Bode diagram, respectively. MATLAB and PSIM simulation is used to verify the analysis. Simulation result is shown; cross-coupling component has no significant influent to the controller.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.31-40
• /
• 2010

In this paper, we propose a service component based on active model for supporting a variety of u-healthcare application services. It implemented that component as a classification of function for developing healthcare application services. Especially we focus on the adaptive information service in integrated environment using a distributed object technologies of the various healthcare home service based on distributed object group framework. And we shows the service component applying to Healthcare application services such as healthcare home monitoring, mobile monitoring and web based monitoring. Also, we show the performance evaluation results such as response time, system load and network load.

• Journal of the Korea Society for Simulation
• /
• v.15 no.2
• /
• pp.59-69
• /
• 2006

Component-based software development is introduced as a new development paradigm in software development method. This approach is different from existing software development approach because it is based on reusable and autonomous unit, component. Therefore, component-based development(CBD)is divided into two stages; component development process and component assembly process; application development process. Component development process is the core of CBD because component has a key for good software. Currently many methodologies or tools have been introduced by various academies or industries. However, those don't suggest systematic and flexible modeling techniques adaptable easily into component development project. Existing approaches have a unique orarbitrary modeling technique or provide heuristic guidelines for component modeling. As a result, many component developers are faced with a difficult problems; how to developcomponent models, when develop which diagrams, and so on. In order to address this problem, we suggest a meta-model driven approach for component development in this paper. We provide meta-models according to both layer and development phase. We expect that suggested meta-models allow component developers to develop appropriate models of the time.

• ETRI Journal
• /
• v.25 no.6
• /
• pp.464-474
• /
• 2003

Component-based development leverages software reusability and reduces development costs. Enterprise JavaBeans (EJB) is a component model developed to reduce the complexity of software development and to facilitate reuse of components. However, EJB does not support component assembly by a plug-and-play technique due to the hard-wired composition at the code level. To cope with this problem, an architecture for EJB component assembly is defined at the abstract level and the inconsistency between the system architecture and its implementation must be eliminated at the implementation level. We propose a component-based application development tool named the COBALT assembler that supports the design and implementation of EJB component assembly by a plug-and-play technique based on the architecture style. The system architecture is first defined by the Architecture Description Language (ADL). The wrapper code and glue code are then generated for the assembly. After the consistency between the architecture and its implementation is checked, the assembled EJB components are deployed in an application server as a new composite component. We use the COBALT assembler for a shopping mall system and demonstrate that it can promote component reuse and leverage the system maintainability.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.63-72
• /
• 2005

In this paper we describe interoperability maturity measurement, due to highlight a momentous issue on interoperability between heterogeneous distributed component based systems. it also suggests one of various ways for supporting interoperability between each other different component based systems, that is, using web services based mechanism and also revises 'LISI (Level of information systems interoperability)' model to measure interoperability maturity. We also develop the interoperability questionnaire based on the interoperability factors considered at each phase of component based development process, which is possible to measure interoperability maturity between heterogeneous distributed component systems. Based on revised interoperability maturity model and questionnaire we measure each interoperability maturity on examples of two different implementations, that is, web services and distributed object based mechanism. As a result, we suggest an enhanced interoperability way based on analysing problems af these measured results.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.2
• /
• pp.45-52
• /
• 2002

Load modeling is classified into two methods according to approaching method, so called the measurement and component-based method. The measurement method is to model the load characteristics measured directly at substations and feeders. But it is difficult to measure continuously load characteristics from naturally occurring. system variation. The component-based method consists of the fellowing process; component load modeling, composition rate estimation and aggregation of component loads, etc. In this paper, the characteristic experiment of component loads was performed to obtain data for the component load modeling as the component-based method. At first, representative component loads were selected by the proposed method considering the accuracy of load modeling and the performance possibility of component load experiment in the laboratory. Also an algorithm was Proposed to identify the reliability of data obtained from the component load characteristic experiments. In addition, the results were presented as the case studies.

• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.65-74
• /
• 2006

Human tracking is a requirement for the advanced human-computer interface (HCI), This paper proposes a method which uses a component-based human model, detects body parts, estimates human postures, and animates an avatar, Each body part consists of color, connection, and location information and it matches to a corresponding component of the human model. For human tracking, the 2D information of human posture is used for body tracking by computing similarities between frames, The depth information is decided by a relative location between components and is transferred to a moving direction to build a 2-1/2D human model. While each body part is modelled by posture and directions, the corresponding component of a 3D avatar is rotated in 3D using the information transferred from the human model. We achieved 90% tracking rate of a test video containing a variety of postures and the rate increased as the proposed system processed more frames.

• The Korean Journal of Applied Statistics
• /
• v.34 no.6
• /
• pp.945-956
• /
• 2021

In this study, we considered the algorithm of Legendre and Legendre (2012), which derives canonical correspondence analysis from weighted principal component analysis. And, it was proved that the canonical correspondence analysis based on the weighted principal component analysis is exactly the same as Ter Braak's (1986) canonical correspondence analysis based on the Gaussian response model. Ter Braak (1986)'s canonical correspondence analysis derived from a Gaussian response curve that can explain the abundance of species in ecology well uses the basic assumption of the species packing model and then conducts generalized linear model and canonical correlation analysis. It is derived by way of binding. However, the algorithm of Legendre and Legendre (2012) is calculated in a method quite similar to Benzecri's correspondence analysis without such assumptions. Therefore, if canonical correspondence analysis based on weighted principal component analysis is used, it is possible to have some flexibility in using the results. In conclusion, this study shows that the two methods starting from different models have the same site scores, species scores, and species-environment correlations.

• Journal of KIISE:Software and Applications
• /
• v.30 no.12
• /
• pp.1135-1148
• /
• 2003

A commercial-off-the-shelf (COTS) component is an implementation of common functionality among family members, where an in-house component implements an organization-specific functionality. Typically, a COTS component has a producer and aset of potential consumers. Consumers evaluate COTS components thoroughly before they purchase, because these components are developed by third party producers and most consumers have ‘not-invented-here’ syndrome. Hence, evaluating the quality of COTS components becomes an important prerequisite to a successful component-based application development. In this paper, we identify the characteristics of COTS components, and derive a practical quality model for components, C-QM, which consists of quality factors, criteria and metrics and a qualify certification system, C-QCS. The top design goal of C-QM is set to provide a practically applicable comprehensive quality model which can be effectively applied in assessing the various quality aspects of COTS components.

• Communications for Statistical Applications and Methods
• /
• v.14 no.1
• /
• pp.205-213
• /
• 2007

In this paper, the normal mixture model subjected to general linear restriction for component-means based on linear regression is proposed, and its fitting method by EM algorithm and Lagrange multiplier is provided. This model is applied to gene clustering of microarray expression data, which demonstrates it has very good performances for real data set. This model also allows to obtain the clusters that an analyst wants to find out in the fashion that the hypothesis for component-means is represented by the design matrices and the linear restriction matrices.