• 한국작물학회지
• /
• 제27권4호
• /
• pp.371-384
• /
• 1982

1. 내냉성품종의 요망은 고위도지대뿐만 아니라 열대지방에서도 간절하며 요망되는 내냉성품종의 특성도 여러 가지이다. 세계적으로 요망되는 내냉성을 IRRI에서는 편의상 a) 북해도형, b) 수원형, c) 태북일기작형, d) 태북이기작형, e) 열대고냉지형 및 f) Bangladesh형으로 구분하고 있다. 우리나라에서 요망되는 내냉성은 통일계품종에서 더욱 간절하며 생육전반에 걸쳐 Japonica 정도의 생리적 활성이 요망되지만 적어도 유묘기와 성숙기의 저온장해가 Japonica보다 크지 않은 것이 우선 당면한 문제라 하겠다. 일반계품종에서는 조생이면서 안정된 기본영양생장성을 가지고 고온에서 과민하지 않고 저온에서 생육지연이 비교적 작은 것이라면 좋을 것이다. 2. 국내에서의 내냉성계통검정방법과 시설은 통일계품종의 출현 이후 급속히 발전되었으며 저온항온기, 냉수 Tank, growth cabinet, phytotron, 춘천의 냉수포장, 진부, 운봉, 영덕의 내냉계통육종포 등 내냉계통선발을 위해서는 비교적 잘 갖춰진 편이다. 국외의 시설로는 IRRI의 냉수 Tank와 세대촉진시설 그리고 Banaue, Kathmandu나 Kashirnir의 자연생태적조건을 우리가 이용할 수 있을 것이다. 참고로 일본에서 보고된 생육각단계에서의 여러 가지 내냉성검정방법을 소개하였다. 3. 내냉성품종들이 가지고 있는 내냉형질의 단리는 아직 분명히 되어 있지 못하지만 a) 저온발아성, b) 저온유묘생장성, c) 저온묘변색 d) 저온발근력, e) 저온분벽력, f) 저온양분흡수능력, g) 저온동화력, i) 저온임실장해, j) 저온등숙장해 등에 품종간차가 분명한 것이 보고되어 있다. 위의 형질간의 상관관계는 형질에 따라 재료에 따라 구구하였다. 내냉성형질들의 유전에 관한 보고는 많지 않아 저온발아력에 관해 4개 이상의 다인자, 유묘저온생존력에 관해 단인자 또는 다인자, 유수형성기 저온저항력에 관해 4개 또는 그 이상의 다인자, 냉수포장에서의 저온저항력에 관해, 4개 이상의 유전자가 관여되는 것으로 그리고 heritability는 항상 높은 것으로 보고되어 있지만 같은 그 재료들을 가지고 다른 저온에서 검토하면 상이한 결과가 나올 것은 쉽게 짐작할 수 있다. 여러 가지 내냉성검정기술의 발전과 IRRI의 국제 내냉성품종연락시험으로 Japonica, Indica, Bulu 등에서 다같이 많은 품종들이 내냉성모본으로 검정되어 있다. 4. 육종방안을 구상할 때 고려해야 할 사항들 a) 유전질의 다양화, b) 내병충성의 집적, c) 지역별 적응품종의 동정, d) 장려품종의 체계적 통제 등을 고려하면서 단기적 및 장기적 육종방안을 제안하였다. 단기적으로는 일반계품종을 대상으로 하되 우리나라 기존품종을 기초로 알려진 내냉성품종을 가지고 생육일수와 내냉성을 조정하는 한편 극조생내냉성 찰벼모본에 내충내병인 Indica 모본을 일회친으로 Japonica로 Back cross하면서 내병충성을 유지한 계통을 선발하여 이것으로 내냉조합에 내병충성을 첨가시키도록 한다. 장기적 방안으로는 Japonica뿐만 아니라 Indica, Javanica 등 모든 내냉성모본을 이용하여 germplasm의 다양화를 꾀하며 모본별 형질별 내냉성유전자를 동정하여 이들을 종합하여 생육전기간을 안정하게 경과할 수 있게 내냉성을 향상하고 내병충성을 첨가하는 단계적인 과정을 제안하였다. 육종효율을 높이기 위하여 세대촉진, 화분배양과 국제협력의 필요성을 강조하였다.

• 한국환경농학회지
• /
• 제36권3호
• /
• pp.217-221
• /
• 2017

BACKGROUND: For the food safety of cultivated mushroom, information on the safety of agricultural by-products imported as medium substrates for mushroom cultivation is urgently needed. Therefore, this study was performed to detect the presence of heavy metals, residual pesticides, and nutrient component in the imported medium substrates. METHODS AND RESULTS: Six kinds of medium substrates imported from nine countries from 2015 to 2017 were investigated. A mercury analyzer MA-2000 and an inductively coupled plasma spectrometer OPTIMA 7000DV were used to analyze mercury, lead, arsenic, copper, nickel and cadmium. All of these heavy metals were detected at lower level than heavy metal tolerance standard level of by-product fertilizer in Korea. When 246 kinds of residual pesticides were examined by GC and HPLC, imidacloprid, thiamethoxam and carbendazim were detected from Egyptian beet pulp, Indian cottonseed meal and cottonseed hull, respectively. The content of nutrient components (water, crude ash, crude fat, crude protein and crude fiber) varied among imported countries and the medium substrates. CONCLUSION:The presence of heavy metals and residual pesticides in imported medium substrates for mushroom cultivation was confirmed. For the safe production of mushroom, this study shows that imported medium materials for mushroom cultivation need to be managed through continuous monitoring.

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.75-81
• /
• 2003

Pocket machining is metal removal operation commonly used for creating depressions in machined parts. Numerically controlled milling is the primary means for machining complex die surface. These complex surfaces are generated by a milling cutter which removes material as it traces out pre-specified tool paths. To machine, a component on a CNC machine, part programs which define the cutting tool path are needed. This tool path is usually planned from CAD, and converted to a CAM machine input format. In this paper I proposed a new method for generating NC tool paths. This method generates automatically NC tool paths with dynamic elimination of machining errors in 2$\frac{1}{2}$ arbitrary shaped pockets. This paper generates a spiral-like tool path by dynamic computing optimal pocket of the pocket boundary contour based on the type and size of the milling cutter, the geometry of the pocket contour and surface finish tolerance requirements. This part programming system is PC based and simultaneously generates a G-code file.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.593-600
• /
• 2012

Thixomolding of Mg-alloy is a semi-solid injection molding process utilizing thixotropic phenomenon. Using this process, higher strength, thinner wall section and tighter tolerance without porosity are obtained. It has been applied for production of near-net-shape magnesium component. To design optimal thixomolding process of Mg-alloy part, molding conditions such as slurry temperature, mold temperature and injection time should be determined properly. Selection of these parameters has been dependent upon engineers' experience and intuitiveness. In this paper, to improve mechanical properties of the thixomolded product, optimal selection of process variables such as injection velocity, barrel temperature and die temperature in the process has been studied through microstructural analysis and Taguchi method. Performance of the process is verified through experiments.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.740-745
• /
• 2005

Selective assembly is a method to find out appropriate matching pairs to be assembled to enhance the quality of the product. This study proposes an algorithm to select and match the components with two performance characteristics: at first, the number of matchable mates are calculated for each components. A matchable mate is defined to be the one of which the values of each performance characteristics lie in a rectangular mesh originated from the component under consideration. And the highest priority is given to the item with smallest number of matchable mates. The item of highest priority is matched to the one with smallest number of matchable mates among them. To find out the mates for the unmatched items, the mesh size is enlarged at the next iteration. Beginning with a small mesh, the procedure is repeated until the mesh covers the tolerance intervals of each performance characteristics. A VCR head case is analyzed.

• Journal of Plant Biotechnology
• /
• 제32권1호
• /
• pp.1-14
• /
• 2005

Plant responses to salinity stress is critical in determining the growth and development. Therefore, adaptability of plant to salinity stress is directly related with agriculture productivity. Salt adaptation is a result of the integrated functioning of numerous determinants that are regulated coordinately through an appropriate responsive signal transduction cascade. The cascade perceives the saline environment and exerts control over the essential mechanisms that are responsible for ion homeostasis and osmotic adjustment. Although little is known about the component elements of salt stress perception and the signaling cascade(s) in plant, the use of Arabidopsis plant as a molecular genetic tool has been provided important molecular nature of salt tolerance effectors and regulatory pathways. In this review, I summarize recent advances in understanding the molecular mechanisms of salt adaptation.

• 품질경영학회지
• /
• 제25권1호
• /
• pp.135-141
• /
• 1997

The Copper-Clad Laminate (CCL) is a main electronic component of specialtype printed circuit boards (PCBs) such as Silver Through Hole PCB. This CCL should have high reliability under the aging test, and usually the test is done at a higher temperature (110-$150^{\circ}C$) than the normal. Then, this test condition of high temperature may cause such quality problems as hole eccentricity and reduction of distance between part holes. After measuring the CCL shrinkage affected by temperature, the correction factor of a press mold was a, pp.ied to solve these problems. The results showed that the tolerance of hole pitch(${\pm}$$100{\mu}m$) was satisfactory and the internal and external failure costs were reduced by 55%.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.346-350
• /
• 2004

In Blu-ray(BD) optical system, as a short laser wavelength of laser diode and thin cover layer thickness of' disc, the proper adjustment of spherical aberration should be performed. Considering thin cover layer' thickness and tolerance variation of disc in BD optical system, spherical aberration in BD format is mort: serious than CDㆍDVD format Especially, in dual-layer disc, to compensate the aberration at each layer, optical component should be moved finely in the way of optical path. In this study, 1 -axis moving actuator was introduced as the method of compensating the spherical aberration, and the mechanism of the system was described. Finally, its effect on optical system will be mentioned.

• 한국생산제조학회지
• /
• 제7권2호
• /
• pp.91-99
• /
• 1998

This paper presents a methodology for identifying the cutter runout geometry in end milling process. Cutter runout is common but undesirable phenomenon in multi-tooth machining because it introduces variable chip loading to insert which results in a accelerated tool wear. amplification of force variation and hence enlargement vibration amplitude From understanding of chip load change kinematics, the analytical cutting force convolution model was formulated as the angular domain convolution model was formulated as the angular domain convolution of three dynamic cutting force component functions. By virtue of the convolution integration property, the frequency domain expression of the local cutting forces and the chip width density of the cutter. Experimental study is presented to validate the analytical model. This study provides the in-process monitoring and compensation of dynamic cutter runout to improve machining tolerance and surface quality for industrial application.

• 대한조선학회논문집
• /
• 제44권4호
• /
• pp.425-438
• /
• 2007

In this paper, unsettled technical controversies concerning about fatigue strength analysis for FPSO, one of the representative floaters, associated with welding types, screening methods, fabrication tolerances, corrosion margins and Morison loads are described based on yard practices. Basic theory for stochastic fatigue analysis is introduced as detail as possible. In order to resolve large parts of the controversies, a new fully stochastic fatigue analysis program for FPSO is developed.