• Progress in Superconductivity and Cryogenics
• /
• v.15 no.2
• /
• pp.34-38
• /
• 2013

AC Losses for face to face stacks of four identical coated conductors (CCs) were numerically calculated using the H-formulation combined with the E-J power law and the Kim model. The motive sample was the face to face stack of four 2 mm-wide CC tapes with 2 ${\mu}m$ thick superconducting layer of which the critical current density, $J_c$, was $2.16{\times}10^6A/cm^2$ on IBAD-MgO template, which was suggested for the mitigation of ac loss as a round shaped wire by Korea Electrotechnology Research Institute. For the calculation the cross section of the stack was simply modeled as vertically aligned 4 rectangles of superconducting (SC) layers with $E=E_o(J(x,y,t)/J_c(B))^n$ in x-y plane where $E_o$ was $10^{-6}$ V/cm, $J_c$(B) was the field dependence of current density and n was 21. The field dependence of the critical current of the sample measured in four-probe method was employed for $J_c$(B) in the equation. The model was implemented in the finite element method program by commercial software. The ac loss properties for the stacks were compared with those of single 4 cm-wide SC layers with the same critical current density or the same critical current. The constraint for the simulation was imposed in two different ways that the total current of the stack obtained by integrating J(x,y,t) over the cross sections was the same as that of the applied transport current: one is that one fourth of the external current was enforced to flow through each SC. In this case, the ac loss values for the stacks were lower than those of single wide SC layer. This mitigation of the loss is attributed to the reduction of the normal component of the magnetic field near the SC layers due to the strong expulsion of the magnetic field by the enforced transport current. On the contrary, for the other case of no such enforcement, the ac loss values were greater than those of single 4cm-wide SC layer and. In this case, the phase difference of the current flowing through the inner and the outer SC layers of the stack was observed as the transport current was increased, which was a cause of the abrupt increase of ac loss for higher transport current.

• Journal of Information Technology and Architecture
• /
• v.9 no.2
• /
• pp.177-186
• /
• 2012

Navy establishes the Naval Task Forces (TF) for many kinds of maritime operations. Then the TF in the maritime environment performs simultaneous component operations such as ASUW (Anti-Surface Warfare), ASW (Anti-Submarine Warfare), AAW (Anti-Aircraft Warfare), and assault operations. The TF consists of many tactical systems for the completion of missions C4I, VOIP (Voice Over Internet Protocol), DMHS (Digital Massage Handling System), and TDLs (Tactical Data Links) such as LINK-11, 16, ISDL (Inter Site Data Link). When the TF executes naval operations to complete a mission, we are interested in the kill chain for the maritime operations in the TF. The kill chain is a standard procedure for the naval operations to crush enemy defenses. Although each ship has a procedure about a manual for 'how to fight', it leave something to be desired for the TF detailed kill chain currently. Therefore, in this paper, we propose the naval TF's kill chain to perform the naval operations. Then, the operational effectiveness of the TF in the kill chain environment is determined through operation scenarios of TDL system implementation. It is to see the operational information sharing effect to a data link model based on MND-AF OV 6c (statement of tracking operational status) in the maritime operations applied to TDL and is to identify improvements in information dissemination process. We made the kill chain of maritime TF for the effective naval operations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1558-1565
• /
• 2020

Objective: The objective of this study was to characterize the number of loci affecting growth traits and the distribution of single nucleotide polymorphism (SNP) effects on growth traits, and to understand the genetic architecture for growth traits in Hanwoo (Korean cattle) using genome-wide association study (GWAS), genomic partitioning, and hierarchical Bayesian mixture models. Methods: GWAS: A single-marker regression-based mixed model was used to test the association between SNPs and causal variants. A genotype relationship matrix was fitted as a random effect in this linear mixed model to correct the genetic structure of a sire family. Genomic restricted maximum likelihood and BayesR: A priori information included setting the fixed additive genetic variance to a pre-specified value; the first mixture component was set to zero, the second to 0.0001×σ²_g, the third 0.001×σ²_g, and the fourth to 0.01×σ²_g. BayesR fixed a priori information was not more than 1% of the genetic variance for each of the SNPs affecting the mixed distribution. Results: The GWAS revealed common genomic regions of 2 Mb on bovine chromosome 14 (BTA14) and 3 had a moderate effect that may contain causal variants for body weight at 6, 12, 18, and 24 months. This genomic region explained approximately 10% of the variance against total additive genetic variance and body weight heritability at 12, 18, and 24 months. BayesR identified the exact genomic region containing causal SNPs on BTA14, 3, and 22. However, the genetic variance explained by each chromosome or SNP was estimated to be very small compared to the total additive genetic variance. Causal SNPs for growth trait on BTA14 explained only 0.04% to 0.5% of the genetic variance Conclusion: Segregating mutations have a moderate effect on BTA14, 3, and 19; many other loci with small effects on growth traits at different ages were also identified.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.6019-6023
• /
• 2013

Lung cancer, one of the leading causes of cancer-related deaths, usually appears as solitary pulmonary nodules (SPNs) which are hard to diagnose using the naked eye. In this paper, curvelet-based textural features and clinical parameters are used with three prediction models [a multilevel model, a least absolute shrinkage and selection operator (LASSO) regression method, and a support vector machine (SVM)] to improve the diagnosis of benign and malignant SPNs. Dimensionality reduction of the original curvelet-based textural features was achieved using principal component analysis. In addition, non-conditional logistical regression was used to find clinical predictors among demographic parameters and morphological features. The results showed that, combined with 11 clinical predictors, the accuracy rates using 12 principal components were higher than those using the original curvelet-based textural features. To evaluate the models, 10-fold cross validation and back substitution were applied. The results obtained, respectively, were 0.8549 and 0.9221 for the LASSO method, 0.9443 and 0.9831 for SVM, and 0.8722 and 0.9722 for the multilevel model. All in all, it was found that using curvelet-based textural features after dimensionality reduction and using clinical predictors, the highest accuracy rate was achieved with SVM. The method may be used as an auxiliary tool to differentiate between benign and malignant SPNs in CT images.

• The KIPS Transactions:PartB
• /
• v.10B no.6
• /
• pp.599-610
• /
• 2003

The Web plays an important role as information source and most Web applications are document-centric. A document implies an intention of its own designer, which can be utilized actively in automation of business processes. Through an understanding of an intrinsic nature of a document function, we can see a document as an executable computer program in a special case. For this approach, we propose an active document model that is composed of form, knowledge base, rules, and queries. For reusability and interoperability of a document, each component of the proposed model is uniformly represented in XML. The proposed active document not only plays a passive role in providing user interfaces, but also is a document that a machine can infer and process with reading a procedure of document processing and business rules intended by document designers. Through this approach, document can interact with machines and can cooperate with other applications. For applicability of our active document, we show a case study for the processing of purchase orders in a B2B e-Commerce system. This paper is expected to provide the framework of accelerating the development of intelligent applications through our approach regards form document as a computer program. In short, the proposed active document contains knowledge representation and processing method, consequently our document will play an important role in providing a concept of document of pursuing in Semantic Web.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.11
• /
• pp.527-536
• /
• 2017

With the recent development of smart grid industry, the necessity for efficient EMS(Energy Management System) has been increased. In particular, in order to reduce electric load and energy cost, sophisticated electric load forecasting and efficient smart grid operation strategy are required. In this paper, for more accurate electric load forecasting, we extend the data collected at demand time into high time resolution and construct an artificial neural network-based forecasting model appropriate for the high time resolution data. Furthermore, to improve the accuracy of electric load forecasting, time series data of sequence form are transformed into continuous data of two-dimensional space to solve that problem that machine learning methods cannot reflect the periodicity of time series data. In addition, to consider external factors such as temperature and humidity in accordance with the time resolution, we estimate their value at the time resolution using linear interpolation method. Finally, we apply the PCA(Principal Component Analysis) algorithm to the feature vector composed of external factors to remove data which have little correlation with the power data. Finally, we perform the evaluation of our model through 5-fold cross-validation. The results show that forecasting based on higher time resolution improve the accuracy and the best error rate of 3.71% was achieved at the 3-min resolution.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.1036-1040
• /
• 2005

Near-infrared reflectance spectroscopic (NIRS) calibrations were developed for accurate and fast prediction of whole broiler chicken carcass composition. The Feed and Forage Foss systems Model 5000 Reflectance Transport Model 5000 with near-infrared reflectance spectroscopy (NIRS)-WinISI II windows software was used for this purpose. One equation was developed for the prediction of each carcass component. One hundred and fifty freeze dried broiler whole carcass samples were ground in a Cyclotech 1,093 sample mill and analyzed for dry matter, protein, fat, calcium and phosphate. Samples were divided into two sets: a calibration set from which equations were derived and a prediction set used to validate these equations. The chemical analysis values (mean${\pm}$SD) were calculated based on dry matter basis as follows: dry matter: 33.41${\pm}$2.78 (range: 26.41-43.47), protein: 54.04${\pm}$6.63 (range: 36.20-76.09), fat 35.44${\pm}$8.34 (range: 7.50-55.03), calcium 2.55${\pm}$0.65 (range: 0.99-4.41), phosphorus 1.38${\pm}$0.26 (range: 0.60-2.28). One hundred and three samples were used to calibrate the equations and prediction values. The software used was modified to obtain partial least square regression statistics, as it is the most suitable for natural products analysis. The coefficients of determination ($R^2$) and the standard errors of prediction were 0.82 and 1.83 for the dry matter, 0.96 and 1.98 for protein, 0.99 and 1.07 for fat, 0.90 and 0.30 for calcium and 0.91 and 0.11 for phosphorus, respectively. The present study indicated that NIRS can be calibrated to predict the whole broiler carcass chemical composition, including minerals in a rapid, accurate, and cost effective manner. It neither requires skilled operators nor generates hazardous waste. These findings may have practical importance to improve instrumental procedures for quick evaluation of broiler carcass composition.

• Molecules and Cells
• /
• v.39 no.12
• /
• pp.855-861
• /
• 2016

Ginsenosides, which are the active materials of ginseng, have biological functions that include anti-osteoporotic effects. Aqueous ginseng extract inhibits osteoclast differentiation induced by receptor activator of NF-${\kappa}B$ ligand (RANKL). Aqueous ginseng extract produces chromatography peaks characteristic of ginsenosides. Among these peaks, ginsenoside Re is a major component. However, the preventive effects of ginsenoside Re against osteoclast differentiation are not known. We studied the effect of ginsenoside Re on osteoclast differentiation, RANKL-induced tartrate-resistant acid phosphatase (TRAP) activity, and formation of multinucleated osteoclasts in vitro. Ginsenoside Re hampered osteoclast differentiation in a dose-dependent manner. In an in vivo zebrafish model, aqueous ginseng extract and ginsenoside Re had anti-osteoclastogenesis effects. These findings suggest that both aqueous ginseng extract and ginsenoside Re prevent bone resorption by inhibiting osteoclast differentiation. Ginsenoside Re could be important for promoting bone health.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1342-1347
• /
• 2007

최근 수자원 분야에서 GIS의 활용은 유역의 수리, 수문분석을 위한 모형의 입력자료 생성 및 모의 결과를 가시화, 이에 따른 유역관리 시스템의 구축 등 폭넓게 활용되고 있다. 또한 국가지리정보시스템에 조사를 통해서 수치지형도 및 주제도를 구축, 구축된 자료의 표준화를 실시하고 있는 실정이다. 그러나 수자원 분야에서 GIS를 활용하기 위한 기술은 주로 선진국을 중심으로 발전하여 왔기 때문에 우리의 실정에 맞지 않아 활용측면에 있어 신뢰할 만한 결과를 얻지 못하고 있는 실정이다. 따라서 국내 상황을 고려하면서 수자원이라는 전문분야 적용에 적합한 GIS(HyGIS)를 개발하고 여기에 수리, 수문분석모형을 연계하여 국내 실무분야에 적용함에 있어 편의성과 실용성을 구비한 모형개발이 이루어져야 한다. 따라서 본 연구에서는 국내 소프트웨어 GeoMania(HyGIS)에 의한 GIS 정보처리의 자동화를 기반으로 하여 실무에서 활용도가 높은 수문모형인 HEC-HMS 및 HEC-1과 수리모형인 HEC-RAS를 연계 및 통합하기 위해서 HyGIS에서 DLL형태로 제공되도록 하였다. HyGIS에서는 수문학적 DEM 분석 및 공간정보 생성, 선형참조가 가능한 하천 네트워크 생성, 유역 시설물 관리 등의 기능을 제공하며 COM(Component Object Model)을 기반으로 개발된 시스템으로 다른 소스로부터 개발된 컴포넌트를 연계하여 시스템의 기능 확장을 손쉽게 수행할 수 있도록 하였을 뿐만 아니라 공간 DB는 GeoMania의 고유 DB인 GSS를 이용한다. HyGIS-HMS는 HyGIS를 통한 국내 유역의 지리정보를 활용하여 HEC-HMS 뿐만 아니라 HEC-1을 추가하여 사용자의 기호와 편의에 따라 모형을 선택할 수 있도록 하였으며 HEC-1의 결과를 가시화하기 위해서 챠트 기능을 추가하였으며 매개변수를 자동으로 산정할 수 있도록 시스템을 구축하였다. HyGIS-RAS는 국내 하천유역에 대해서 기구축 되어있는 하천관리지리정보시스템(RIMGIS)자료를 직접 활용하도록 구성되어있고 자료를 활용하여 제내지와 제외지를 통합하여 TIN분석을 실시하여 범람 홍수해석에 활용할 수 있도록 하였다. 하천수리해석의 기능을 보강하기 위해 역산조도계수 산정모형, 상류-사류 천이류 구간에 대한 부등류 해석모형, 범람 홍수류에 대한 홍수위 산정모형, 하천수리계산시의 불확실도 해석모형 등의 새로운 기능을 추가하여 제시하였다. 모든 입출력자료는 프로젝트 단위별로 운영되어 data의 관리가 손쉽도록 하였으며 결과를 DB에 저장하여 다른 모형에서도 적용할 수 있도록 하였다. 그리고 HyGIS-HMS 및 HyGIS-RAS 모형에서 강우-유출-하도 수리해석-범람해석 등이 일괄되게 하나의 시스템 내에서 구현될 수 있도록 하였다. 따라서 HyGIS와 통합된 수리, 수문모형은 국내 하천 및 유역에 적합한 시스템으로서 향후 HydroInformatics 구현을 염두에 둔 특화된 국내 수자원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.

• Journal of Applied Biological Chemistry
• /
• v.62 no.4
• /
• pp.407-415
• /
• 2019

The biological half-life of pesticides applied on crops is the key indicator for ensuring the safety of agricultural products. The biological half-life is affected by the several factors like growing conditions of the crop, climate, application method, and physicochemical properties of pesticides. In this study, the biological half-life was calculated and the degradation rates of six triazole fungicides sprayed on perilla leaves were evaluated. Moreover, the statistical analysis confirmed the correlation between the biological half-life and physicochemical properties of six triazole pesticides. The recoveries of the six pesticides were between 84.8-104.9%, which satisfied the residual pesticide analysis criteria. The biological half-life of six pesticides sprayed on perilla leaves, calculated using the first-order kinetics model, ranged between 6.4-15.1 days. When the biological half-life and the physicochemical properties were correlated using the principal component analysis: pKa and Log P, the biological half-life was found to be affected by PC1. The correlation coefficient between biological half-life and physicochemical properties (pKa), calculated by Spearman rank-order correlation, was R² = -0.928 (p <0.01). Biological half-life has been shown to correlate with pKa. In conclusion, it can be used as a database for the relationship between biological half-life and physicochemical properties and will contribute to ensure safe supply of agricultural products.