• Earthquakes and Structures
• /
• 제16권5호
• /
• pp.575-588
• /
• 2019

Seismic design method based on bearing capacity has been widely adopted in building codes around the world, however, damage and collapse state of structure under strong earthquake can not be reflected accurately. This paper aims to present a deformation-based seismic design method based on the research of RC component deformation index limit, which combines with the feature of Chinese building codes. In the proposed method, building performance is divided into five levels and components are classified into three types according to their importance. Five specific design approaches, namely, "Elastic Design", "Unyielding Design", "Limit Design", "Minimum Section Design" and "Deformation Assessment", are defined and used in different scenarios to prove whether the seismic performance objectives are attained. For the components which exhibit ductile failure, deformation of components under strong earthquake are obtained quantitatively in order to identify the damage state of the components. For the components which present brittle shear failure, their performance is guaranteed by bearing capacity. As a case study, seismic design of an extremely irregular twin-tower high rise building was carried out according to the proposed method. The results evidenced that the damage and anti-collapse ability of structure were estimated and controlled by both deformation and bearing capacity.

• 전자공학회논문지CI
• /
• 제42권3호
• /
• pp.63-72
• /
• 2005

본 논문에서는 가상성형 시스템에 적합한 Radial Basis Function(RBF) 기반의 변형 기법과 변형된 얼굴 구성 요소를 얼굴 영상에 혼합하는 기법을 제시한다. 가상성형을 위한 변형 기법은 유동적인 얼굴 구성 요소들을 변형함에 있어 부드러움과 정확성을 가져야 하고 변형 부위 이외의 다른 얼굴 구성 요소에는 왜곡을 주지 않는 지역성도 가져야 한다. 이를 위해 제안된 가상성형 시스템은 자유형태 변형 모델을 기반으로 RBF에 의해 격자들의 변형 정도를 계산한다. 성형의 정확성을 위해 변형 오차는 기준곡선 정점들의 목표 위치와 실제 변형된 위치 사이의 오차제곱합을 이용하여 Singular Value Decomposition(SVD)에 의해 반복적으로 RBF 매핑 함수의 계수들을 계산하여 보정한다. 변형된 얼굴 구성 요소는 Euclidean Distance Transform(EDT)에 의해 계산된 혼합 비율을 사용하여 원본 얼굴 영상과 합성된다. 제안된 변형 기법과 합성 기법은 가상성형 결과의 정확도와 왜곡 측면에서 우수한 성능을 보인다는 것을 실험적으로 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.736-739
• /
• 1995

The meshless adaptive method based on multiple scale analysis is developed to simulate large deformation problems. In the procedure, new particles are simply added to the orginal particle distribution because meshless methods do not require mesh structures in the formulations. The high scale component of the approximated solution detects the localized region where a refinement is needed. The high scale component of the second invariant od Green-Lagrangian strain tensor is suggested as the new high gradient detector for adaptive procedures. The feasibility of the proposed theory is demonstrated by a numerical experiment for the large deformation of hyperelastic materials.

• 소성∙가공
• /
• 제29권1호
• /
• pp.27-36
• /
• 2020

The Goss texture component of {110}<001> is well known as one of the best texture components to improve the magnetic properties of electrical steel sheets. The small amount of the Goss texture component is obtained at the surface of the steel sheet by shear deformation due to friction between the steel sheet and the roll during conventional symmetric rolling. This study aims to identify a method to obtain high intensity of the Goss texture component not only at the surface but in the whole layer of the steel sheet by shear deformation of asymmetric rolling. Low carbon steel sheets, which have different initial texture, were asymmetrically rolled by about 50%, 70%, and 80%. The pole figures of the top, center, and bottom layers of the initial and asymmetrically rolled low carbon steel sheets were measured by an X-ray diffractometer. Based on the measured pole figures of these samples, the intensities of the main texture components were analyzed for the initial and asymmetrically rolled low carbon steel sheets. As a result, the initial low carbon steel sheet with the γ-fiber component showed a higher intensity of the Goss texture component in the whole layer than the steel sheet with other texture components after asymmetric rolling.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.161-164
• /
• 2003

This paper proposes a hierarchical approach to active shape model using wavelet transform. The proposed algorithm allows us to use both global shape characteristics and finer details for model deformation. The statistical properties of the wavelet transform of a deformable model are analyzed by principal component analysis and used as priors in the contour's deformation.

• 한국컴퓨터그래픽스학회논문지
• /
• 제10권1호
• /
• pp.15-21
• /
• 2004

This paper proposes a real-time technique for simulating large rotational deformations. Modal analysis based on a linear strain tensor has been shown to be suitable for real-time simulation, but is accurate only for moderately small deformations. In the present work, we identify the rotational component of an infinitesimal deformation, and extend linear modal analysis to track that component. We then develop a procedure to integrate the small rotations occurring al the nodal points. An interesting feature of our formulation is that it can implement both position and orientation constraints in a straightforward manner. These constraints can be used to interactively manipulate the shape of a deformable solid by dragging/twisting a set of nodes, Experiments show that the proposed technique runs in real-time even for a complex model, and that it can simulate large bending and/or twisting deformations with acceptable realism.

• 한국컴퓨터정보학회논문지
• /
• 제14권10호
• /
• pp.225-231
• /
• 2009

본 논문에서는 시간이 변하는 볼륨 데이터로부터 등위면 콤포넌트를 계산하고 그 움직임을 추적하는 새로운 시각화 알고리즘을 기술한다. 등위면 시각화는 볼륨 데이터를 효과적으로 보여주기 위한 가장 흔한 방법 중 하나이다. 그러나 대부분의 기존 등위면 시각화 알고리즘들은 시간이 정지되어 있는 정적 볼륨 데이터에 국한하여 적용되어왔다. 이미징 기술과 시뮬레이션 기술이 발전함에 따라 대용량의 시변 볼륨 데이터들이 생성되고 있어 이러한 시변볼륨 데이터의 동적인 특성을 이용할 수 있는 효과적인 시변 등위면 시각화 알고리즘이 필요하게 되었다. 우리는 우선 두 연속되는 시변 볼륨 데이터에서 정의되는 등위면 컴포넌트들간의 시간적 일치성을 정의한다. 이 정의에 기반하여 컨투어 트리를 이용하여 얻어진 등위면 컴포넌트로부터 그것과 일치되는 그 다음 시간단계에서의 컴포넌트들을 추적하는 알고리즘을 수행한다. 이러한 과정을 매 시간단계에서 반복하면, 선택된 등위면 컴포넌트의 동적인 변형 모습을 보여주어 효과적인 시각화를 이룰수 있다.

• 한국전산유체공학회지
• /
• 제12권2호
• /
• pp.37-45
• /
• 2007

The hybrid Cartesian/immersed boundary method is applied to simulate fluid-structure interaction of a two-dimensional orbiting flexible foil. The elastic deformation of the flexible foil is modelled based on the dynamic equation of a thin-plate. At each time step, the locations and velocities of the Lagrangian control points on the flexible foil are used to reconstruct the boundary conditions for the flow solver based on the hybrid staggered/non-staggered grid. To test the developed code, the flow fields around a flapping elliptical wing are calculated. The time history of the vertical force component and the evolution of the vorticity fields are compared with recent other computations and good agreement is achieved. For the orbiting flexible foil, the vorticity fields are compared with those of the case without the deformation. The combined effects of the angle of attack and the orbit on the deformation are investigated. The grid independency study is carried out for the computed time history of the deformation at the tip.

• 소성∙가공
• /
• 제12권1호
• /
• pp.43-48
• /
• 2003

The strain state during the continuous confined strip shearing (CCSS) based on ECAP was tackled by means of a two-dimensional FEM analysis. The deformation of AA 1100 sheet in the CCSS apparatus was composed of three distinct processes of rolling, bending and shearing. The pronounced difference in the friction conditions on the upper and lower roll surfaces led to the different variation of the strain component ${epsilon}_13$ throughout the thickness of the aluminum sheet. Strain accompanying bending was negligible because of a large radius of curvature. The shear deformation was concentrated at the corner of the CCSSchannel where the abrupt change in the direction of material flow occurred. The process variables involving the CCSS-die design and frictions between tools and strip influenced the evolution of shear strains during CCSS.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.11-17
• /
• 2000

,An residual stress and out-of plane deformation produced by butt welding was analyzed by four kinds of 3D-FEM programs(Thermal El-P1 Analysis) developed by authors. The magnitude of deformation of perpendicular to the welding line generated by butt welding was large when the reduced integration method was used. This was because of removal of the locking phenomenon, which it was generally known that the stiffness of the shear component of out-of-plane was largely evaluated. And the magnitude of residual stress was analyzed by using the FEM program based on a large and small deformation theory was similar to that was analyzed by the redeced integration method.