Component deformation-based seismic design method for RC structure and engineering application |
Han, Xiaolei
(School of Civil and Transportation Engineering, South China University of Technology)
Huang, Difang (School of Civil and Transportation Engineering, South China University of Technology) Ji, Jing (School of Civil and Transportation Engineering, South China University of Technology) Lin, Jinyue (School of Civil and Transportation Engineering, South China University of Technology) |
1 | FEMA 274 (1997), NEHRP Commentary on the guidelines for seismic rehabilitation of buildings, Federal Emergency Management Agency, Washington, D.C., USA. |
2 | FEMA 343 (1999), Case Studies: An Assessment of the NEHRP guidelines for the seismic rehabilitation of buildings, Federal Emergency Management Agency, Washington, D.C., USA. |
3 | FEMA 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, D.C., USA. |
4 | FEMA P-58-1 (2012), Seismic Performance Assessment of Buildings Volume 1- Methodology, Washington, D.C., USA. |
5 | GB 50011-2010 (2010), Code for Seismic Design of Buildings, Architecture & Building Press, Beijing, Ministry of Housing and Urban-Rural Development of the P.R. China, China. |
6 | GB18306-2015 (2015), General Administration of Quality Supervision, Inspection and Quarantine of P.R.C, Seismic Ground Motion Parameter Zonation Map, Architecture & Building Press, Beijing, China. |
7 | JGJ3-2010 (2010), Technical Specification for Concrete Structures of Tall Building, Architecture & Building Press, Beijing, Ministry of Housing and Urban-Rural Development of the P.R. China, China. |
8 | Ji, J., Xiao, Q. and Huang, C. (2010), "Research on deformation limits of performance-based RC shear walls controlled by flexure", J. Build. Struct., 31(9), 35-41. |
9 | LATBSDC (2008), An Alternative Procedure for Seismic Analysis and Design of Tall Buildings Located in the Los Angeles Region, Los Angeles Tall Buildings Structural Design Council: Los Angeles, CA, USA. |
10 | Lee, H.S. and Jeong, K.H. (2018), "Performance-based earthquake engineering in a lower-seismicity region: South Korea", Earthq. Struct., 15(1), 45-65. https://doi.org/10.12989/eas.2018.15.1.045. DOI |
11 | Lu, X., Ye, L., Ma, Y. and Tang, D. (2012), "Lessons from the collapse of typical RC frames in Xuan-kou school during the Great Wen-chuan Earthquake", Adv. Struct. Eng., 15(1), 139-153. https://doi.org/10.1260/1369-4332.15.1.139. DOI |
12 | Moehle, J., Bozorgnia, Y., Jayaram, N., Jones, P., Rahnama, M., Shome, N., Tuna, Z., Wallace, J., Yang, T. and Zareian. F. (2011), "Case studies of the seismic performance of tall buildings designed by alternative means", PEER Report 2011/05, Pacific Earthquake Engineering Research Center, Berkeley, CA, USA. |
13 | Mun, J. and Yang, K. (2016), "Displacement ductility ratio-based flexural design approach of reinforced concrete slender shear walls", Mag. Concrete Res., 68(8), 409-422. https://doi.org/10.1680/jmacr.15.00113. DOI |
14 | Panagiotou, M., Visnjic, T., Antonellis, G., Galanis, P. and Moehle, J.P. (2013), "Effect of hoop reinforcement spacing on the cyclic response of large reinforced concrete special moment frame beams", PEER Report 2013/16, Pacific Earthquake Engineering Research (PEER) Center, College of Engineering, University of California, USA. |
15 | Ricci, P., Verderame, G. and Manfredi, G. (2012), "ASCE/SEI 41 Provisions on deformation capacity of older-type reinforced concrete columns with plain bars", J. Struct. Eng., 139, 04013014. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000701. DOI |
16 | Parrotta, J.E., Peiretti, H.C., Gribniak, V. and Caldentey, A.P. (2014), "Investigating deformations of RC beams: experimental and analytical study", Comput. Concrete, 13(6), 1-27. https://doi.org/10.12989/cac.2014.13.6.799. DOI |
17 | PERFORM 3D (2011), Nonlinear Analysis and Performance Assessment for 3D Structures User Guide, Version 5, Computers and Structures, Inc., Berkeley, CA, USA. |
18 | Qi, Y.L., Han, X.L. and Ji, J. (2013), "Failure mode classification of reinforced concrete column using Fisher method", J. Central South Univ., 20, 2863-2869. https://doi.org/10.1007/s11771-013-1807-1. DOI |
19 | SEAONC (2007), Requirements and Guidelines for the Seismic Design and Review of New Tall Buildings using Nonprescriptive Seismic-Design Procedures, Structural Engineers Association of Northern California, San Francisco, CA, USA. |
20 | Sezen, H. and Moehle, J.P. (2004), "Shear strength model for lightly reinforced concrete columns", J. Struct. Eng., 130(11), 1692-1703. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1692). DOI |
21 | Sharma, K., Deng, L. and Noguez, C.C. (2016), "Field investigation on the performance of building structures during the April 25, 2015 Gorkha earthquake in Nepal", Eng. Struct., 121, 61-74. https://doi.org/10.1016/j.engstruct.2016.04.043. DOI |
22 | TBI (2010), "Guidelines for performance-based seismic design of tall buildings", PEER Report 2010/05, The TBI Guidelines Working Group, Pacific Earthquake Engineering Research Center, University of California, Berkeley, California, USA. |
23 | Siahos, G. and Dritsos, S. (2010), "Procedural assumption comparison for old buildings via pushover analysis including the ASCE 41 update", Earthq. Spectra, 26, 187-208. https://doi.org/10.1193/1.3272266. DOI |
24 | Sozen, M.A. (1981), "Review of earthquake response of RC buildings with a view of drift control", State of the Art in Earthquake Engineering, Proceedings of the 7th World Conference on Earthquake Engineering, Istanbul, Turkey January. |
25 | Tang, Y., Zheng, Q. and Lou, M. (2012), "Optimization of seismic performance objectives based on cost-effectiveness criterion", J. Tongji Univ. (Nat. Sci.), 40(11), 1613-1619. DOI |
26 | Tian, Y., Lu, X., Lu, X., Li, M. and Guan, H. (2016), "Quantifying the seismic resilience of two tall buildings designed using Chinese and US Codes", Earthq. Struct., 11(6), 1-19. https://doi.org/10.12989/eas.2016.11.6.925. DOI |
27 | Vision 2000 (1995), Performance Based Seismic Engineering of Buildings, Structural Engineers Association of California, Oakland, USA. |
28 | Wallace, J.W., Massone, L.M. and Orakcal, K. (2006), "Analytical modeling of reinforced concrete walls for predicting flexural and couple-shear-flexural responses", PEER Report 2006/07, Pacific Earthquake Engineering Research (PEER) Center, College of Engineering, University of California, California, USA. |
29 | Acun, B. and Sucuoglu, H. (2010), "Performance of reinforced concrete columns designed for flexure under severe displacement cycles", ACI Struct. J., 107, 364-371. |
30 | ASCE/SEI 31 (2003), Seismic Evaluation of Existing Buildings, American Society of Civil Engineers, Reston, Virginia, USA. |
31 | ASCE/SEI 41 (2006), Seismic Rehabilitation of Existing Buildings, American Society of Civil Engineers, Reston, Virginia, USA. |
32 | ASCE/SEI 7 (2016), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers: Reston, Virginia, USA. |
33 | CTBUH (2008), Recommendations for the Seismic Design of High-rise Buildings, Council on Tall Buildings and Urban Habitat, Illinois Institute of Technology, Chicago, USA. |
34 | Cui, J.D. (2017), "Research and experimental verification of deformation index limits of RC beams, columns and shear walls", Ph.D. Dissertation, South China University of Technology, Guangzhou, China. |
35 | Elwood, K.J. and Moehle, J.P. (2006) "Idealized backbone model for existing reinforced concrete columns and comparisons with FEMA 356 criteria", Struct. Des. Tall Spec. Build., 15, 553-569. https://doi.org/10.1002/tal.382. DOI |
36 | Cui, J.D., Han, X.L., Gong, H.J. and Ji, J. (2018b), "Deformation limits of reinforces concrete columns and their experimental verification", J. Tongji Univ. (Nat. Sci.), 46(5), 593-603. |
37 | Cui, J.D., Han, X.L., Ji, J. and Gong, H.J. (2018a), "Experimental study on deformation limits of RC beams", J. Harbin Inst. Technol., 50(6), 169-176. |
38 | Elif, M.U., Erberik, M.A. and Askan, A. (2015), "Performance assessment of Turkish residential buildings for seismic damage and loss estimation", J. Perform. Constr. Facil., 29(2), 04014063. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000547. DOI |
39 | Elwood, K.J., Matamoros, A., Wallace, J.W., Lehman, D., Heintz, L., Mitchell, A., Moore, M., Valley, M., Lowes, L.N., Comartin, C. and Moehle, J.P. (2007) "Update to ASCE/SEI 41 concrete provisions", Earthq. Spectra, 23(3), 493. https://doi.org/10.1193/1.2757714. DOI |
40 | ETABS (2016), Extended 3D Analysis of Building Systems Software, Computers and Structures, Inc., Berkeley, CA, USA. |
41 | FEMA 273 (1997), NEHRP Guidelines for Seismic Rehabilitation of Buildings, Federal Emergency Management Agency: Washington, D.C., USA. |
42 | ATC-40 (1996), Seismic Evaluation and Retrofit of Concrete Buildings. Applied Technology Council, Redwood, California, USA. |