• 한국전자파학회논문지
• /
• 제21권8호
• /
• pp.857-864
• /
• 2010

본 논문에서는 LINC(LInear amplification with Nonlinear Component) 시스템의 두 경로 간의 이득 및 위상 오차의 발생에 의한 신호 왜곡을 분석하고, 이를 기반으로 생성한 LUT(Look Up Table)를 활용하여 효율적으로 경로 오차를 제거하는 기법을 제안한다. LINC 시스템은 Outphasing 기법을 활용하기 때문에 경로 오차에 의한 EVM (Error Vector Magnitude) 및 ACPR(Adjacent Channel Power Ratio)의 성능 저하가 커진다. 이득 오차, 위상 오차를 두 개의 변수로 하여 EVM과 ACPR을 구하는 방법을 도출하였다. 도출한 방법을 기반으로 EVM, ACPR에 관한 2차원 LUT를 생성하고, 파일럿 신호 없이 효율적으로 경로 오차를 도출하는 기법을 제안하였다. DSP(Digital Signal Processing) 기반의 경로 보상기를 포함한 LINC 시스템을 구축하고 성능을 검증하였다. 대역폭 1.5 MHz, 4.7 dB의 PAPR(Peak to Average Power Ratio)을 갖는 16QAM 신호에 대하여 보상 전에 경로 간 95 %의 이득 비율과 $19.33^{\circ}$의 위상 지연을 가지고 있는 LINC 시스템에 대하여 제안된 기법을 적용한 경우, 경로 간 이득 비율은 99 % 이상, 위상 지연 값은 $0.5^{\circ}$ 이하로 보정되었으며, ACPR은 18.1 dB 향상됨을 확인하였다.

• 한국토양환경학회지
• /
• 제5권1호
• /
• pp.3-12
• /
• 2000

다영역 모델은 Preferential 흐름에 대한 해석을 위하여 토양을 여러개의 공극군으로 나누고 각 토양의 수리학적 특성을 이용하여 토양내의 흐름을 표현한 방정식이다. 이 모델을 유한차분법을 이용하여 수치적으로 풀이할 때 해의 정확도와 일관성을 분석하기위해 수정등가편미분방정식(MEPDE)을 구하고, 안정성을 분석하기위해 Von Neumann법을 이용한다. 수정등가편미분방정식을 이용하여 얻은 유한차분계에 대한 평가는 모델방정식에 대하여 일관성이 있는 것으로 나타났고 모델방정식에 대한 유한차분법은 2차의 정확도를 얻었다. 모델방정식의 안정성 해석은 Von Neumann방법을 이용하여 진폭도와 위상지연을 구하고 이를 분석하였다. 유한차분계의 진폭비는 Peclet수의 변화에 관계없이 비분산적이었으며 Peclet수가 1.0일때 가장 큰 값을 나타냈고, 위상지연은 참값에 대한 빈도요소보다 더 느리게 파동함을 나타냈다. 모델방정식의 안정성 해석 결과, 모델의 영역분해는 보다 정확한 결과를 얻기 위해서 Peclet수는 1.0보다 작고 Courant수는 3.0보다 작은 범위 안에서 분해하는 것이 좋은 것으로 분석된다.

• 한국산림과학회지
• /
• 제87권2호
• /
• pp.153-163
• /
• 1998

사시나무속(屬)(Genus Populus) Leuce절 수종중 우리나라에 식재되어 있는 사시나무, 수원사시나무, 은백양, 은사시나무와 인공교배종 수개 클론에 대한 분자유선학적 유연관계를 RAPD PCR 방법을 이용하여 구명하였다. 88개의 arbitrary primer중 재현성과 다형성을 기준으로 선발하고, 유연관계분석을 위하여 22개의 primer에서 181개의 RAPD marker를 이용하였다. 유연관계를 위한 조사는 5개 수종, 14개 클론 몇 천연집단의 개체목에 대하여 181개의 다형성 RAPD marker를 가지고, UPGMA와 Neighbor-joining 방법으로 유연관계도를 구했다. 방법을 달리하여 그런 유연관계도에서 각각의 분지에서의 차이는 현 사시 클론간에 미미한 위치변화만 있을 뿐 전체적인 계통수에는 변화가 없었다. 유연관계도에서 수원사시나무는 은백양과 같은 분지군을 형성하였고, 주성분분석에서는 사시나무와 같은 계열을 이루고 있어서 수원사시나무는 이 들 두 종의 1대 교잡종으로 추정되며, 은사시나무는 자연교잡종과 인공교배종이 동일한 유전적 배경을 갖는 것으로 나다났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.151-156
• /
• 1995

This paper presents a methodology for real-time detecting and identifying the runout geometry of an end mill. Cutter runout is a common but undesirable phenomenon in multi-tooth machining such as end-milling process because it introduces variable chip loading to insert which results in a accelerated tool wear,amplification of force variation and hence enlargement vibration amplitude. Form understanding of chip load change kinematics, the analytical sutting force model was formulated as the angular domain convolution of three dynamic cutting force component functions. By virtue of the convolution integration property, the frequency domain expression of the total cutting forces can be given as the algebraic multiplication of the Fourier transforms of the local cutting forces and the chip width density of the cutter. Experimental study are presented to validata the analytical model. This study provides the in-process monitoring and compensation of dynamic cutter runout to improve machining tolerance tolerance and surface quality for industriql application.

• Biomolecules & Therapeutics
• /
• 제8권1호
• /
• pp.63-72
• /
• 2000

We intended to show some basic requirements for spectrum analysis of electroencephalogram (EEG) by visualizing the differences of the results according to different values of some parameters for analysis. Spectrum analysis is the most popular technique applied for the quantitative analysis of the electroen- cephalographic signals. Each step from signal acquisition through spectrum analysis to presentation of parameters was examined with providing some different values of parameters. The steps are:(1) signal acquisition; (2) spectrum analysis; (3) parameter extractions; and (4) presentation of results. In the step of signal acquisition, filtering and amplification of signal should be considered and sampling rate for analog-to-digital conversion is two-time faster than highest frequency component of signal. For the spectrum analysis, the length of signal or epoch size transformed to a function on frequency domain by courier transform is important. Win dowing method applied for the pre-processing before the analysis should be considered for reducing leakage problem. In the step of parameter extraction, data reduction has to be considered so that statistical comparison can be used in appropriate number of parameters. Generally, the log of power of all bands is derived from the spectrum. For good visualization and quantitative evaluation of time course of the parameters are presented in chronospectrogram.

• Journal of Ecology and Environment
• /
• 제36권3호
• /
• pp.205-210
• /
• 2013

Cicuta virosa L. (Apiaceae) is a perennial emergent plant designated as an endangered species in South Korea. According to the former records, only four natural habitats remain in South Korea. A former study suggested that three of four populations (Pyeongchang: PC, Hoengseong: HS, Gunsan: GS) would be classified as different ecotypes based on their different morphological characteristics and life cycle under different environmental conditions. To evaluate this suggestion, we estimated genetic diversity in each population and distance among three populations by random amplification of polymorphic DNA. Seven random primers generated a total of 61 different banding positions, 36 (59%) of them were polymorphic. Nei's gene diversity and the Shannon diversity index increased in the order of PC < HS < GS, which is the same order of population size. In the two-dimensional (2D) plot of first two principal components in principal component analysis with the presence of 61 loci, individuals could be grouped as three populations easily (proportion of variance = 0.6125). Nei's genetic distance for the three populations showed the same tendency with the geographical distance within three populations. And it is also similar to the result of discriminant analysis with the morphological or life-cycle factors from the previous study. From the results, we concluded that three different populations of C. virosa should be classified as ecotypes based on not only morphology and phenology but genetic differences in terms of diversity and distance as well.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.101-107
• /
• 2018

In this study, the analysis of radiation noise and chattering noise of vehicle seat recliner was conducted through testing and analysis. First, operating noise was measured by seat back frame and recliner, and chattering noise was confirmed. Next, the transient dynamic analysis was performed, and the result was mapped to the acoustic analysis. Finally, the test and analysis were compared and analyzed. The results are as follow. First, it was found that the peaks appeared in common in the range of 620~650Hz, 1,240~1,290 Hz, and 1,840~1,940 Hz. It was judged that the dynamic characteristics of the recliner system overlapped with the rotation component of the motor to cause amplification of noise and vibration. Next, as a result of imaging the radiation noise analysis, it was judged that the noise radiated in the forward and backward direction has a greater influence than the direction of the rotation axis when the ear position of the person is taken as a reference.

• Earthquakes and Structures
• /
• 제3권5호
• /
• pp.675-694
• /
• 2012

The 2008 Iwate-Miyagi Nairiku earthquake ($M_w$ 6.9, $M_{jma}$ 7.2) occurred on 14 June 2008 in Japan. The amplification and asymmetric waveform of the vertical acceleration at the ground surface recorded by accelerometers at station IWTH25, situated 3 km from the source, were remarkable in two ways. First, the vertical acceleration was extremely large (PGA = 38.66 $m/s^2$ for the vertical component, PGA = 42.78 $m/s^2$ for the sum of the three components). Second, an unusual asymmetric waveform, which is too far above the zero acceleration axis, as well as large upward spikes were observed. Using a multidegree-of-freedom (MDF) system consisting of a one-dimensional continuum subjected to vertical acceleration recorded at a depth of 260 m below ground level, the present paper clarifies numerically that these singular phenomena in the surface vertical acceleration records occurred as a result of the jumping and collision of a layer in vertical motion. We herein propose a new mechanism for such jumping and collision of ground layers. The unexpected extensive landslides that occurred in the area around the epicenter are believed to have been produced by such jumping under the influence of vertical acceleration.

• Journal of Magnetics
• /
• 제14권1호
• /
• pp.42-46
• /
• 2009

The measurement of external magnetic field orientation using Giant Magneto Impedance (GMI) sensors has been performed. A soft magnetic alloy of $Co_{30}Fe_{34}Ni_{36}$ was electroplated on a Si wafer with a CoFeNi seed layer. V-shaped microwire patterns were formed using a conventional photolithography process. An external magnetic field was generated by a rectangular AlNiCo permanent magnet. The reference direction was defined as the external magnetic field direction oriented in the middle of 2 GMI devices. As the orientation of the magnetic field deviated from the reference direction, variation in the field component along each device introduced voltage changes. It was found that, by taking the voltage difference between the left and right arms of the Vshaped device, the nonlinearity of each device could be significantly reduced. The fabricated angle sensor had a linear range of approximately $70^{\circ}$ and an overall sensitivity of approximately 10 mV.

• Journal of Microbiology and Biotechnology
• /
• 제17권12호
• /
• pp.2027-2032
• /
• 2007

[ ${\alpha}$ ]-Synuclein is the major component of Lewy bodies and responsible for the amyloid deposits observed in Parkinson's disease. Ordered filamentous aggregate formation of the natively unfolded ${\alpha}$-synuclein was investigated in vitro with the periodic ultrasonication. The ultrasonication induced the fibrillation of ${\alpha}$-synuclein, as the random structure gradually converted into a ${\beta}$-sheet structure. The resulting fibrils obtained at the stationary phase appeared heterogeneous in their size distribution, with the average length and height of $0.28\;{\mu}m{\pm}0.21\;{\mu}m$ and $5.6\;nm{\pm}1.9\;nm$, respectively. After additional extensive ultrasonication in the absence of monomeric ${\alpha}$-synuclein, the equilibrium between the fibril formation and its breakdown shifted to the disintegration of the preexisting fibrils. The resulting fragments served as nucleation centers for the subsequent seed-dependent accelerated fibrillation under a quiescent incubation condition. This self-seeding amplification process depended on the seed formation and subsequent alterations in their properties by the ultrasonication to a state that accretes the monomeric soluble protein more effectively than their reassociation of the seeds back to the original fibrils. Since many neurodegenerative disorders have been considered to be propagated via the seed-dependent amyloidosis, this study would provide a novel aspect of the significance of the seed structure and its properties leading to the acce]erated amyloid formation.