• Archives of Reconstructive Microsurgery
• /
• 제21권1호
• /
• pp.41-49
• /
• 2012

Purpose: To report clinical appearances and the outcomes of patients treated for wrist laceration with suicidal intent. Materials and Methods: Between March 2005 and February 2008, patients with wrist laceration were treated at our center. Among them, 14 patients with suicidal intent were reviewed retrospectively. They were 8 females and 6 males with a mean age of 33 years at the time of treatment. The side of injured wrist, injured structures, suicidal instrument, the time of injury, a suicidal motive, drug or alcohol abuse or not, indication of combined psychiatric disease, the duration of postoperative treatment, and the results of treatment were analyzed. Results: The injured wrist was the left one in 13 cases (93%), and knife wounds in 11 cases (79%) was the most frequent mechanism of injury. An average of 4.6 structures were injured including 3.5 tendons, 0.57 nerves and 0.5 arteries. The most frequently injured structures were the palmaris longus (71%), FCU (50%), FCR (43%), FDS 3 (36%), FDS 2, median nerve, and ulnar artery (each 29%). Simultaneous injury of both median and ulnar nerves occurred in 3 cases (21%), and simultaneous injury of both radial and ulnar artery occurred in 1 case (7%). The injury time was the night in 12 cases (86%), and the most frequent suicidal motive was human relations such as lover or spouse in 12 cases (86%). In 9 cases (64%), the injured were in a drunken state, 3 cases (21%) had been treated for a psychiatric disease at the time of the injury. The durations of postoperative treatment were an average of 5 days of admission and 1 day follow up. Only 1 case results could be evaluated. Conclusions: Patient's poor compliance in wrist laceration with suicidal intent should be expected and these characteristics may affect the management plan.

• 한국정밀공학회지
• /
• 제25권10호
• /
• pp.77-83
• /
• 2008

In terms of saving costs, energy and materials, the weight of cars has been gradually reduced by optimizing design of structure, which also gives us good performance. In compliance with this, it should satisfy the lifetime of cars for 25 years under the operation. The purpose of this study is to evaluate the strength of fatigue using date from strain gauges attached carbody and bogie frame. This dynamic stress can be evaluated using S-N curve based on stress amplitude. Modified S-N curve by CORTON-DOLAN is used for more conservative and substantial evaluation. In addition, !he loadings itself of carbody and bogie frame are considered by calculating the rate of the differences which are occurred between empty car and fuiiy occupied car with passengers. Rainflow cycle counting method is applied to arrange the stress data for the modified S-N curve to predict lifetime of the materials. Conclusively the cumulative damages are not only calculated by Miner's Rule, but the safety factors are also determined by Goodman diagram.

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.432-439
• /
• 2004

Korean certification regulation for particulate filtering respirators requires inward leakage (IL) test as European Standards (EN) and the standard levels of regulation are the same as those of EN. This study was conducted to evaluate particulate filtering respirators being commercially used in the market by using IL and assess the characteristics of IL. The study began with discussing the concept of IL, comparison of IL with fit test, and IL measurement method. Three brands of half masks and 10 brands of filtering facepieces (two top class, four 1st class and four 2nd class), total 13 brands respirators, and 10 test panels (subjects) who were classified in 9 facial grids in accordance with face length and lip length, were selected for IL test. IL tests were conducted in the laboratory of 3M Innovation Center which was established by EN standard. As expected ILs of half masks were lower than those of filtering facepiece mask. ILs of half masks and some filtering facepieces were significantly different in manufacturers. ILs of 1st class filtering facepieces were found to be much more than those of 2nd class and thus the result would cause wearers to get confused to select a mask. Four of six brands being no compliance with standards were thought that they should be tested again for certification because of a lot of differences from standards. There were no significant differences among ILs of five exercises. In 6 out of 13 brands lognormal distribution of ILs may be a better fit distribution and in 7 brands both lognormal and normal distributions were rejected. The result indicates that geometric mean may be better than arithmetic mean to establish standard.

• Nutrition Research and Practice
• /
• 제7권3호
• /
• pp.207-215
• /
• 2013

The objective of this study was to investigate the associations between the prevalence of overweight and obesity and the degree of adherence to the Korean Dietary Action Guides for Children (KDAGC). In a cross-sectional study based on a child care center-based survey in Seoul, Korea, we collected parental-reported questionnaires (n = 2,038) on children's weight and height, frequency of fruit and vegetable consumption, and the quality of dietary and activity behaviors based on the 2009 KDAGC Adherence Index (KDAGCAI) which was developed as a composite measure of adherence to the KDAGC. Overweight and obesity were determined according to age- and sex-specific BMI percentile from the 2007 Korean national growth chart. Associations were assessed with generalized linear models and polytomous logistic regression models. Approximately 17.6% of Korean preschool children were classified as overweight or obese. Obese preschoolers had lower adherence to the KDAGCAI compared to those with lean/normal weight. Preschoolers with a high quality of dietary and activity behaviors had a 51% decreased odds ratio (OR) of being obese (highest vs. lowest tertile of KDAGCAI-score, 95% CI 0.31, 0.78; P = 0.001); the associations were more pronounced among those who were older (P = 0.048) and lived in lower income households (P = 0.014). A greater frequency of vegetable consumption, but not fruit, was associated with a borderline significant reduction in the prevalence of obesity. Our findings support the association between obesity prevention and high compliance with the Korean national dietary and activity guideline among preschool children.

• 대한한의진단학회지
• /
• 제9권1호
• /
• pp.59-68
• /
• 2005

Background and purpose: Cardiovascular disease will undoubtedly rise along with the aging of the 'baby-boom' generation. The purpose of this study is to find the new index of the cardiovascular aging. Methods: The effects of aging on the heart and the arterial system are surveyed in the point of structure and function. Results: Arterial stiffening is due to the fatiguing effects of periodic stress on the arterial wall and is the main reason for increasing pulse wave velocity. The systolic hypertension is caused by the early return of wave reflection. The increased after-load by the arterial change leads to the development of left ventricular hypertrophy. The reduction in left ventricular compliance cause the impairments of the diastolic function. In contrast to the lower limb, aging effect in the upper limb are almost due to the ascending aortic pressure wave and the reflected wave from the lower limb. Conclusion: We have the following points. (1) The change of physiological pulse pattern by age can be explained by the early returning of reflected wave. (2) The atrial pulse in old age are generated by the left ventricular hypertrophy.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1343-1347
• /
• 2013

This paper presents an analysis methods for current collection quality in catenary system by means of video image based monitoring system. Arcing is the sparking at the interface point between pantograph and contact wire when the electric trains have traction current values at speed. Percentage of arcing at maximum line speed is measurable parameters for compliance with the requirements on dynamic behaviour of the interface between pantograph and contact wire in accordance with requirement of IEC and EN standards. The arc detector and video is installed on a train aim at the trailing contact strip according to the travel direction. The arc detector presented and measured verity of value such as the duration and power density of each arc and the video image is measured a image when the arc is occurred in pantograph. In this paper we analysis of video image in accordance with power density of arcing from arc detector and compared with video image and power density of arcing so as to produce quality of arcing from image.

• 한국수산과학회지
• /
• 제41권3호
• /
• pp.155-162
• /
• 2008

The seawater in the Taean area was surveyed to evaluate the conditions of the bay and compliance with the bacteriological criteria for a designated area for shellfish production for export. Samples of seawater were collected monthly at 34 sampling stations established in the survey area from January 2002 to December 2004. The bacterial density in the coastal area close to a pollution source located to the northeast of the survey area was higher than in the open sea to the west. The bacteriological counts in the water did not change with 16.5mm of rainfall, but increased abruptly after 65.4mm of rainfall. The total coliform and fecal coliform most probable numbers (MPNs) of 1,224 seawater samples in the survey area were <1.8-2,400 and <1.8-790 MPN/100 mL, respectively. The geometric mean and estimated 90th percentile of total coliforms were 1.9-3.4 and 2.7-26.3 MPN/100mL, respectively, and for fecal coliforms were <1.8-2.6 and 1.8-12.0 MPN/100mL, respectively. The bacteriological water quality in the Taean seawater area met the National Shellfish Sanitation Program criteria for an approved area and the Korea Shellfish Sanitation Program criteria for a designated area for shellfish production for export.

• 한국산업보건학회지
• /
• 제21권4호
• /
• pp.201-208
• /
• 2011

Objectives: According to the compliance of the asbestos-related regulation, every building has to be inspected for asbestos presence before its abatement work. This study was performed for identifying the types and contents of asbestos in building bulk samples. Materials and Methods: Bulk samples were collected during the asbestos inspection in 2010. We grouped the bulk samples into the regulated asbestos containing materials(RACM), presumed asbestos containing materials(PACM), and construction products. Additionally, the types of asbestos in all bulk samples were identified by polarization microscopy(PLM). Results: The RACMs were from building, house, pipe and facility. The RACMs were found mainly building (72.1%) and house (93.7%). The contents of chrysotile in building, house and facility were 66.9% (1-90%), 89.7% (2-90%) and 11.0% (2-90%), respectively. PACMs were surfacing material, thermal system insulation (TSI), and miscellaneous material. The miscellaneous materials that showed a high detection rate (79.2%) were ceiling, roofing and wall materials. Among them, the roofing materials had high chrysotile content(9.7%, 2-21%), followed by wall (8.7%, 2-21%) and ceiling (3.4%, 1-17%). In the construction products, asbestos was found mainly in slate (92.6%, 2-21%), including chrysotile. The slate had high asbestos content (9.7%, 2-21%), followed by cement flat board (8.7%, 2-19%) and textile (3.4%, 1-17%) Conclusions: Utilizing these results, it would be contributed to construct a useful ACM database and prevent from asbestos exposure to workers in the asbestos abatement and maintenance works.

• 한국항해항만학회지
• /
• 제38권2호
• /
• pp.135-140
• /
• 2014

2013년 8월 20일 해사노동협약이 국제적으로 발효되면서 휴식시간의 실제적인 이행 여부를 항만국통제에서 점검하게 되었다. 한일간 셔틀 운항을 하는 선박은 항해시간이 짧고 입항 항구수가 많아 해사노동협약이나 우리나라 선원법에서 정하고 있는 선원휴식시간을 준수하지 못하는 경우가 발생하고 있으며, 이는 선박의 운항에 큰 지장을 초래할 수 있는 사항이 되었다. 이 연구에서는 이러한 선박들에서 휴식시간 규정을 준수할 수 있는 방안을 찾기 위해 항해사들의 당직모델을 여러 가지로 변경하거나 정박당직을 육상직원으로 대체하는 방안 등을 검토하였다. 한일간 셔틀 운항 선박이 휴식시간 규정을 만족하기 위해서는 입항 항구 수의 축소 또는 정박당직의 육상직원 대체와 같은 방안의 복합적인 적용이 필요한 것으로 연구되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.123-132
• /
• 2014

The maritime sector is advancing with dedicated endeavor to reduce greenhouse gas in addressing issues with regards to global warming. Since 01 January 2013, the International Maritime Organization (IMO) regulation mandatory requirement for Energy Efficiency Design Index (EEDI) has been in place and should be satisfied by newly-built ships of more than 400 gross tonnage and the Ship Energy Efficiency Management Plan (SEEMP) for all ships type. Therefore, compliance to this necessitates planning during the design stage whereas verification can be carried-out through an acceptable method during sea trial. The MEPC-approved 2013 guidance, ISO 15016 and ISO 19019 on EEDI serves the purpose for calculation and verification of attained EEDI value. Individual ships EEDI value should be lower than the required value set by these regulations. The key factors for EEDI verification are power and speed assessment and their synchronization. The shaft power can be measured by telemeter system using strain gage during sea trial. However, calibration of shaft power onboard condition is complicated. Hence, it relies only on proficient technology that operates within the permitted ISO allowance. On the other hand, the ship speed can be measured and calibrated by differential ground positioning system (DGPS). An actual test on a newly-built vessel was carried out to assess the correlation of power and speed. The Energy-efficiency Design Index or Operational Indicator Monitoring System (EDiMS) software developed by the Dynamics Laboratory-Mokpo Maritime University (DL-MMU) and Green Marine Equipment RIS Center (GMERC) of Mokpo Maritime University was utilized for this investigation. In addition, the software can continuously monitor air emission and is a useful tool for inventory and ship energy management plan. This paper introduces the synchronization and identification method between shaft power and ship speed for EEDI verification in accordance with the ISO guidance.