• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.961-967
• /
• 2012

The metal is frequently used in the air-conditioner frame, which must have the durability from the various external environments, but has difficulties in being manufactured for many complex shapes. On the other hand, the plastic, used as a material of injection molding, enables the realization of various shapes and the mass-production of complex ones and leads low production cost. As the air-conditioner frame becomes increasingly complex and detailed, the plastic material is highlighted as an alternative for the frame. But the product molded by plastic with a complex shape might have a noise problem. Therefore this study attempts to design the product through TRIZ in order to reduce the noise of the air-conditioner with the frame of plastic material.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.280-287
• /
• 2001

The present study investigates convective heat/mass transfer and flow characteristics inside the rib-roughened cooling passage of the gas turbine blades. A square duct with rectangular ribs is used and $\wedge-$ and V-shape ribs with $60^{\circ}$ attack angle are installed on the test plate surfaces. Naphthalene sublimation technique is employed to determine the detailed local heat transfer coefficients using the heat and mass transfer analogy. The ribs disturb the main flow resulting in the recirculation and secondary flows near the ribbed wall and the vortices near the side-wall. The local heat transfer and the secondary flow in the duct are changed largely according to the rib orientation. A square duct with $\wedge$ and V-shape ribs has two pairs of secondary flow because of the rib arrangement. So, the duct has complex heat/mass transfer distribution. The average heat/mass transfer coefficient and pressure drop of $\wedge-$ and V-shape ribs are higher than those with $90^{\circ}$ and $60^{\circ}$ attack angles. The average heat/mass transfer coefficient on the $\wedge-shape$ ribs is higher than that on the V-shape ribs. Also, the uniformity of heat/mass transfer coefficient on discrete ribs is higher than that on continuous rib.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.932-938
• /
• 2001

This study is concerned with the shape optimization of stem for the artificial hip prosthesis with unbonded cement mantle. The artificial hip prosthesis with unbonded cement mantle allows a stem to slip on cement mantle because of polished stem surface. Unbonded cement mantle type has several advantages compared with bonded cement mantle type, for example, small micro motion, preventing stress shielding and so on. In this study, 2-dimensional axisymmetric model was developed with considering characteristics of unbonded cement mantle. Moreover, optimal shape of stem was obtained by using feasible direction method. The objective of this optimization is maximizing supported vertical loading. The slip motion and stresses of stem, cement mantle and bone is used for constraints. The optimal shape which obtained by this study has slope of 0.15 in proximal part and maintains the width about 5mm in distal part In addition, simplified 3-dimensional analysis which applying optimal shape is carried out. The result of 3-dimensional analysis showed that optimal shape has some advantages for cement mantle stress. However, more realistic 3-dimensional analysis which including bending effect, complex geometries etc. is needed in further research.

• Biomolecules & Therapeutics
• /
• 제25권3호
• /
• pp.223-230
• /
• 2017

Platelets play an essential role in hemostasis through aggregation and adhesion to vascular injury sites but their unnecessary activation can often lead to thrombotic diseases. Upon exposure to physical or biochemical stimuli, remarkable platelet shape changes precede aggregation or adhesion. Platelets shape changes facilitate the formation and adhesion of platelet aggregates, but are readily reversible in contrast to the irrevocable characteristics of aggregation and adhesion. In this dynamic phenomenon, complex molecular signaling pathways and a host of diverse cytoskeleton proteins are involved. Platelet shape change is easily primed by diverse pro-thrombotic xenobiotics and stimuli, and its inhibition can modulate thrombosis, which can ultimately contribute to the development or prevention of thrombotic diseases. In this review, we discussed the current knowledge on the mechanisms of platelet shape change and also pathological implications and therapeutic opportunities for regulating the related cytoskeleton dynamics.

• 식물분류학회지
• /
• 제41권3호
• /
• pp.223-229
• /
• 2011

The taxonomy of the Isodon excisus complex has been ambiguous and problematic because the morphological characters, especially characters related to the leaf distinguishing subgroups of the complex in the original descriptions, are variable. To elucidate the taxonomic structure of the I. excisus complex in Korea, 34 characters were measured from 70 OTUs representing different locations and analyzed by principal component analysis (PCA). The analysis showed that principle component axis 1, 2, 3 (PC1, PC2, PC3) represents 52.0% of the total variance and characters showing high loading values for PC1 were leaf shape, density of non-glandular hairs on the lower surface of the leaf, and characters related to the teeth of the leaf. The length of apical tooth and the angle between two widest points of the leaf were highly correlated to PC2 and PC3, respectively. Three-dimensional scatter plotting of OTUs for PC1, PC2, and PC3 axis showed that the areas of previously recognized three subgroups of I. excisus completely overlapped. Our result supported that just one taxon, I. excisus var. excisus, should be recognized in the complex at the variety level.

• 전자공학회논문지CI
• /
• 제47권5호
• /
• pp.1-9
• /
• 2010

일반적으로 동적 손동작 인식을 위해서는 전처리, 손 추적, 손 모양 검출의 단계가 필요하다. 본 논문에서는 전처리와 손 모양 검출 방법을 개선함으로써 성능을 향상시킨 동적 손동작 인식 방법을 제안한다. 전처리 단계에서는 동적테이블을 이용하여 노이즈제거 성능을 높이고, YCbCr 컬러공간을 이용한 기존의 피부색 검출 방식에서 피부색의 범위를 조절할 수 있도록 하여 피부색 검출 성능을 높인다. 특히 손 모양 검출 단계에서는 가이드라인을 이용하여 동적 손동작 인식의 요소인 시작이미지(Start Image)와 정지 이미지(Stop Image)를 검출하여 동적 손동작을 인식하기 때문에 학습예제를 사용한 손동작 인식 방법에 비해 인식 속도가 빠르다는 이점이 있다. 가이드라인이란 웹캠을 통해 입력되는 손의 모양과 비교하여 검출하기 위해 화면에 출력하는 손 모양의 라인이다. 가이드라인을 이용한 동적 손동작 인식 방법의 성능을 평가하기 위해 웹캠을 사용하여 복잡한 배경과 단순한 배경으로 구분된 9가지 동영상을 대상으로 실험하였다. 그 결과 CPU 점유율이 낮고, 메모리 사용량도 적기 때문에 시스템 부하가 높은 환경에 효과적임을 알 수 있었다.

• Tribology and Lubricants
• /
• 제37권4호
• /
• pp.117-124
• /
• 2021

In this study, we perform a 3D CFD conjugate analysis according to the shape of the foil ramp of the air foil thrust bearing, analyze the flow characteristics inside the bearing, and compare the results corresponding to the two shapes. Air has a lower viscosity than lubricating oil. Therefore, the thrust runner of the bearing must rotate at high speed to support the load. The gap between thrust runner and foil is significantly smaller than that of the oil bearing. Hence, it is crucial to analyze the complex flow characteristics inside the bearing to predict the complex flow inside the bearing and performance of the bearing. In addition, flow characteristics may appear differently depending on the ramp shape of the bearing foil, which may affect bearing performance. In this study, we numerically analyze the main flow path of air flowing into the bearing and the secondary flow path used for cooling the bearing using the commercial CFD software ANSYS CFX and compare the flow characteristics for straight and curved foil ramp shapes. Notably, there is a difference in the speed of the flowing air according to the shape of the ramp, which affects the bearing performance.

• 대한토목학회논문집
• /
• 제29권4D호
• /
• pp.555-561
• /
• 2009

굴착된 터널 형상 재현에서 단면의 종단 데이터는 터널의 유지를 위해서는 아주 중요하다. 터널이 완성되기전에 설계된 모델을 고려한 완성된 터널의 변형이 고려되어져야 한다. 그리고 변형은 터널 단면 전체를 따라 연속적으로 나타날 수 있다. 본 연구에서는 먼저 수학적 분석으로 접근하였고, 그것을 관측된 터널단면 데이터에 실험 하였다. 그 다음 선추적 방법, 유전자 알고리즘, 패턴 추적 방법 등으로 3D 터널 형상 재현을 비교하였다. 수학적 방법론은 철도 터널과 같은 간단한 원통형은 쉽게 해결이 되었으나, 도로터널과 같은 더욱 복잡한 모델(복심 곡선형과 비원통형)은 구속된 상태하에서 소프트 컴퓨팅 툴을 가지고 해결할 수 있었다. 유전자 알고리즘과 직접탐색법은 많은 계산 시간이 걸렸으나 복잡한 상태하에서 더욱 유연함을 보였으며, 선추적 방법은 초기값들이 제한된 범위 하에서 가장 빠르게 계산되어졌다.

• 지질공학
• /
• 제29권4호
• /
• pp.451-460
• /
• 2019

본 논문에서는 고상식(Piloti) 기초가 사용되는 오일샌드 플랜트의 하부기초에 소형강관 말뚝이나 마이크로 파일 등을 마찰 말뚝개념으로 사용할 경우 발생할 수 있는 문제점을 극복하고자 복합거동 연결체를 제안하였다. 말뚝의 개별 침하나 융기(Heaving)를 1개의 군으로 연결하여 복합거동이 가능하도록 하였으며, 하중 지지특성을 분석하였다. 기존 무리말뚝과 말뚝전면(Piled raft) 기초의 장점을 오일샌드 플랜트에 적용 할 수 있도록 복합거동 연결체의 형상을 결정하였다. 또한, 축소모형을 제작하여 하중에 대한 거동을 계측하고, 이를 통해 장치의 안정성 및 취약부위를 검토하여 연결체의 형태를 평가하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4321-4326
• /
• 2011

A new series of heteroleptic cyclometalated iridium(III) complexes has been synthesized and characterized by absorption, emission and cyclic voltammetry studies: $(pqx)_2Ir(acac)$ (1), $(dmpqx)_2Ir(acac)$ (2) and $(dfpqx)_2Ir(acac)$ (3) where pqx=2-phenylquinoxalinate, dmpqx=2-(2,4-dimethoxyphenyl)quinoxalinate, dfpqx=2-(2,4-difluorophenyl) quinoxalinate and acac=acetylacetonate anion. The reaction of excess acetylacetone with ${\mu}$-chloride-bridged dimeric iridium complex, $[(C\^N)_2Ir({\mu}-Cl)]_2$, gives a complex 1 and an unusual hydridoiridium(III) complex, $(pqx)IrH(acac)_2$ (4). The complex 1, 2 and 3 show their emissions in an orangered region (${\lambda}_{PL,max}$ = 583-616 nm), and the emission maxima can be tuned by the change of substituent at phenyl ring of 2-phenylquinoxaline ligand. The phosphorescent line shape indicates that the emissions originate predominantly from $^3MLCT$ states with little admixture of ligand-based $^3({\pi}-{\pi}^*)$ excited states. The structures of complex 3 and 4 are additionally characterized by a single crystal X-ray diffraction method. The complex 3 shows a distorted octahedral geometry around iridium(III) metal ion. A strong trans influence of the phenyl ring is examined. In complex 4, there are two discrete molecules which are mirror images each other at the ratio of 1:1 in an unit cell. We propose that the phosphorescent complex 1, 2 and 3 are possible candidates for the phosphors in OLEDs applications.