• Computers and Concrete
• /
• v.11 no.2
• /
• pp.149-167
• /
• 2013

The complete stress-strain behavior of steel fiber reinforced concrete in compression is needed for the analysis and design of structures. An experimental investigation was carried out to generate the complete stress-strain curve of high-performance steel fiber reinforced concrete (HPSFRC) with a strength range of 52-80 MPa. The variation in concrete strength was achieved by varying the water-to-cementitious materials ratio of 0.40-0.25 and steel fiber content (Vf = 0.5, 1.0 and 1.5% with l/d = 80 and 55) in terms of fiber reinforcing parameter, at 10% silica fume replacement. The effects of these parameters on the shape of stress-strain curves are presented. Based on the test data, a simple model is proposed to generate the complete stress-strain relationship for HPSFRC. The proposed model has been found to give good correlation with the stress-strain curves generated experimentally. Inclusion of fibers into HPC improved the ductility considerably. Equations to quantify the effect of fibers on compressive strength, strain at peak stress and toughness of concrete in terms of fiber reinforcing index are also proposed, which predicted the test data quite accurately. Compressive strength prediction model was validated with the strength data of earlier researchers with an absolute variation of 2.1%.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.2
• /
• pp.49-57
• /
• 1991

The magnets were widely used to increase the retention of overdentures. The purpose of this study was to compare the break load between overdentures and edentulous models. For this study, Model former(U-402) was used for model fabrication and four different magnets were used for evaluation of break load. The artificial saliva was used between overdenture and model. Breakaway loads were tested with an Instron 1122 at a speed of 2mm/min. The results were as follows. 1. The retentivee forces complete dentures with artificial saliva were than the retentive forces of complete detures without artificial saliva. 2. Magnetic overdenture with artificial saliva showed best retentive force, magnetic overdenture without artificial saliva showed the next retentive force, and the complete denture without artificial saliva showed the worst retention. 3. As the magnetic sizes increased, the retentive forces of magnetics were increased. 4. The retentive force of nipple shape magnet is greater than the retentive force of flate shape magnet in the same size.

• Journal of Biosystems Engineering
• /
• v.19 no.1
• /
• pp.22-32
• /
• 1994

The combine harvester is considered as an important but complicated and costly machine. The appropriate size of combine has to be developed to use efficiently in Korea. But the combine is such a complicated machine that a complete design model to develop a new type is impossible without understanding the relationship between each factor. The combine capacity is generally limited by the cleaning shoe performance. So a design model for a cleaning shoe has to be developed first for the complete combine design. The objective of this research was to develop a cleaning model of head-feeding combine to predict grain separation from chaff and broken straw on a sieve. A developed physically based model can explain the situation which can happen during separation process. A test apparatus based on the field going machine was developed. The test materials were paddy rice and barley. The data obtained were analyzed by the hand and the video camera. The developed model was verified as an adequate model through the test with $R^2$ of 0.934 and 0.837. The model can be used to evaluate design and operation alternatives of combine and also applied to the automatic control of separation unit of combine with a loss monitering sensors.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.671-674
• /
• 2011

An experimental test facility for the complete characteristics of pumps is constructed at KIMM(Korea Institute of Machinery and Materials). This paper describes the test facility and test technique of the complete characteristics of pumps, together with a experimental test result for a reactor coolant pump.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2840-2842
• /
• 2000

This paper describes sensor-based occupancy grid map construction method through complete coverage navigation algorithm in unknown environment. In this paper, we use the updated Baysian model for probabilistic grid map. For map construction, complete coverage navigation method in which mobile robot can navigate complete field through as short path as possible in unknown environment, is used. The computer simulations result show that map construction method using complete coverage algorithm is efficient.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.505-507
• /
• 2003

SAT 문제는 하드웨어/소프트웨어 검증과 모델 체킹 등 다양한 분야에서 유용하게 사용되고 있으나 복잡도가 NP-complete 라는 어려움을 가지고 있다. 다양한 알고리즘과 휴리스틱, 도구들이 개발되었지만 그럼에도 불구하고 해결할 수 없는 hard instance 들이 존재한다. 이 논문에서는 그러한 hard instance를 해결하기 위한 방법의 하나로 model accumulation을 제안한다.

• Communications of the Korean Mathematical Society
• /
• v.11 no.1
• /
• pp.43-55
• /
• 1996

Explicit formulas for bi-Hermite polynomials are found and their combinatorial model is considered. This combinatorial model is a generalization of the combinatorial model of Hermite polynomials as matching polynomials.

• Journal of Animal Science and Technology
• /
• v.47 no.2
• /
• pp.147-158
• /
• 2005

The purpose of this study was to find out the effects that daughters' incomplete lactation records affect sire's breeding values through genetic evaluation using RRTDM(random regression test-day model). First, we estimated genetic parameters and breeding values on sires having complete lactation records of daughter by RRTDM, second, we changed complete lactation records of specific sires into incomplete records by various methods. Third, the breeding values were compared between complete and incomplete records. Finally, this study aimed to find out the methods to minimize the estimation errors of young bulls' breeding values. Data used in this study were collected from the dairy herd improvement program, and a total of 97,562 records were composed of 10,929 first parity with both parents known, since 1999. Breeding values on the daughters from randomly chosen sires were calculated and compared with among 90 day, 150day, and 200 day's incomplete records. For milk yields, sire's ranks of breeding values used by complete lactation records were very different from sire's ranks of breeding values obtained by incomplete lactation records(Rank_90 cut, 150cut, 200 cut).The differences were also obtained between complete lactation records(per305_full) and incomplete lactation record (per_90 cut, 150cut, 200 cut) in breeding values regarding persistency. Especially, the differences between per_90 cut and per305_full were very large(from 1.8 kg to 145kg).

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.2
• /
• pp.63-66
• /
• 2014

Managing electronic medical record is very difficult, because the currently electronic medical system is not designed standard that is uniform and proper. In this paper, in order to overcome this situation, we propose meta-data for the management of the electronic medical record as a single system. To this end, we first analyzed the research on electronic medical records and related standards. Second, we, on the basis of the analysis result, abstracted electronic medical record and entities related on electronic medical, and we designed an entity-relationship model. And finally, we have to complete the meta-data through the setting attributes in this entity-relationship model. Through this study, it was possible that we can complete metadata highly expressive medical records, and suggest an alternative for problem of current medical records systems.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.2
• /
• pp.103-114
• /
• 2006

Today the usage of DB already becomes an important issue for many companies' survival. Especially, the companies which have adopted CRM could not gain the return to be expected because of the lack of understanding about the relationship with customers. Professor Schmitt introduced 'the complete CEM(Customer Experience Management) model', but no specific methodology for analysis was introduced. Therefore, in this study we use HOQ, GA, and ANP to build 'the complete CEM model' and present the integrated CEM model based on the integrated analytic process to help the company's decision about the stage to be begun first out of 5 stages of CEM and the priorities of investment in customer experiences.