• 대한치과보철학회지
• /
• 제38권4호
• /
• pp.500-509
• /
• 2000

In general, the three major oral functions of edentulous patients-mastication, phonation, esthetics-can be rehabilitated by the complete dentures, and both the resin based complete denture and the metal based complete denture are commonly used by many clinicians today. For the sake of many advantages such as the excellent thermal conductivity, low volumetric change, high strength, low risk of fracture and the better patient's adaptation, the metal based complete dentures are indicated to the several cases. But, there are common failures of these type of dentures mainly by the fracture or the debonding between the resin structures and the metal frameworks which is caused by the discrepancies of the flexural strength and the coefficient of thermal expansion. This is aggravated by the water contamination of the interface when exposed to the oral environment and results in the failure of complete denture treatment. So, the purpose of this study is to compare the bond strength and the fracture patterns of the gold alloy based and the Co-Cr alloy based complete dentures using the PMMA resins and the 4-META adhesive resins. The results of this study were as follows. 1. Both to the PMMA resin and the 4-META resin, the flexural bond strength of gold alloy is lower than that of Co-Cr alloy(P<0.05) 2. To the Co-Cr alloy, the bond strength of the 4-META resin is significantly higher than that of PMMA resin(P<0.05). 3. The flexural strength of the group with the mechanical retention form is significantly higher than that of the group without retention form(P<0.05). 4. Comparing with the other groups, the fracture patterns of the group 3 are quite different from the group 1,2,5.

• 수학
• /
• 제4권1호
• /
• pp.12-17
• /
• 1967

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 1999년도 Asian Academy of Prosthodntics. Korean Academy of Prosthodontics
• /
• pp.69-69
• /
• 1999

• 대한치과보철학회지
• /
• 제58권1호
• /
• pp.42-49
• /
• 2020

무치악 환자에게서 의치의 제작은 통상적이고 전통적인 방법을 따를 경우 최종 의치 장착까지 여러 단계를 거쳐야 하며 이로 인한 환자의 잦은 내원이 불가피하다. 또한 기공 과정 상에서 나타나는 중합수축에 의한 오차나, 의치의 파절이나 분실 시 빠른 재제작의 어려움 등의 단점이 존재하였다. 하지만 최근 치과 분야에서 computer-aided design and computer-aided manufacturing (CAD/CAM) System이 사용되기 시작하였고, 의치 제작에까지 그 영역을 넓히기 시작하였다. CAD/CAM System을 이용하여 의치를 제작하면 첫 번째 내원 시에 인상채득과 악간관계의 기록, 인공치의 선택 등이 동시에 이루어지고 두 번째 내원 시 의치의 장착이 가능하기 때문에 환자의 내원 횟수와 진료시간을 감소시킬 수 있다. 또한 3D-Printing 기술을 이용하기 때문에 중합수축에 의한 기공 오차를 감소시킬 수 있다. 현재 상용화 되어 있는 CAD/CAM System을 사용한 의치로는 DENTCA CAD/CAM denture (DENTCA Inc., Los Angeles, CA, USA)가 있다. 본 증례에서는 상, 하악 완전 무치악 환자에게서 conventional 한 방법과 DENTCA CAD/CAM Denture System을 사용하는 방법을 동시에 사용하여 두 쌍의 총의치로 수복함으로써 발음, 저작, 연하 등의 기능적인 측면뿐만 아니라 심미적인 측면에서도 양호한 결과를 얻었기에 이를 보고하고자 한다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제28권4호
• /
• pp.287-291
• /
• 2005

완전 폐색을 동반한 상부 요관 결석의 크기에 따른 치료 방법의 적절한 시기를 결정하기 위해 2002년 1월부터 2004년 8월까지 Dornier사의 MPL 9000 체외충격파쇄석기에 의해 치료 받은 201명을 대상으로 하였다. 전체 대상 201명 중, 완전 폐색을 동반하지 않은 경우는 142명이었으며, 완전 폐색을 동반한 경우는 59명이었다. 완전 폐색을 동반하지 않은 경우의 체외충격파쇄석술의 1회, 2회, 3회 누적 성공률은 각각 68.3%, 86.6%, 94.4%이었으며, 결석 크기 10 mm 미만, 10 mm에서 20 mm 미만, 20 mm 이상의 3회 누적 성공률은 각각 100%, 90.5%, 00.0%이었다. 완전 폐색을 동반한 경우의 체외충격파쇄석술의 1회, 2회, 3회 누적 성공률은 각각 44.1%, 66.1%, 76.3%이었으며, 결석 크기 10 mm 미만, 10 mm에서 20 mm 미만, 20 mm 이상의 3회 누적 성공률은 각각 완전 폐색을 동반한 경우는 각각 100%, 65.5%, 33.3%이었다. 완전 폐색을 동반한 상부 요관 결석의 크기는 체외충격파쇄석술에 의미 있는 영향을 주었다. 저자 등은 상부 요관 결석의 치료 방법 선택에 있어서, 완전 폐색을 동반하면서 그 크기가 10 mm 이상인 결석에 대해서는 체외충격파쇄석술 보다는 요관경하배석술 등 다른 방법을 일차적으로 선택할 것을 제안한다.

• Journal of Microbiology and Biotechnology
• /
• 제26권1호
• /
• pp.207-212
• /
• 2016

PacBio's long-read sequencing technologies can be successfully used for a complete bacterial genome assembly using recently developed non-hybrid assemblers in the absence of second-generation, high-quality short reads. However, standardized procedures that take into account multiple pre-existing second-generation sequencing platforms are scarce. In addition to Illumina HiSeq and Ion Torrent PGM-based genome sequencing results derived from previous studies, we generated further sequencing data, including from the PacBio RS II platform, and applied various bioinformatics tools to obtain complete genome assemblies for five bacterial strains. Our approach revealed that the hierarchical genome assembly process (HGAP) non-hybrid assembler resulted in nearly complete assemblies at a moderate coverage of ~75x, but that different versions produced non-compatible results requiring post processing. The other two platforms further improved the PacBio assembly through scaffolding and a final error correction.

• The Journal of Advanced Prosthodontics
• /
• 제8권3호
• /
• pp.187-193
• /
• 2016

PURPOSE. This pilot study was to find the influence of complete denture on the brain activity and cognitive function of edentulous patients measured through Electroencephalogram (EEG) signals. MATERIALS AND METHODS. The study recruited 20 patients aged from 50 to 60 years requiring complete dentures with inclusion and exclusion criteria. The brain function and cognitive function were analyzed with a mental state questionnaire and a 15-minute analysis of power spectral density of EEG alpha waves. The analysis included edentulous phase and post denture insertion adaptive phase, each done before and after chewing. The results obtained were statistically evaluated. RESULTS. Power Spectral Density (PSD) values increased from edentulous phase to post denture insertion adaption phase. The data were grouped as edentulous phase before chewing (EEG p1-0.0064), edentulous phase after chewing (EEG p2-0.0073), post denture insertion adaptive phase before chewing (EEG p3-0.0077), and post denture insertion adaptive phase after chewing (EEG p4-0.0096). The acquired values were statistically analyzed using paired t-test, which showed statistically significant results (P<.05). CONCLUSION. This pilot study showed functional improvement in brain function of edentulous patients with complete dentures rehabilitation.

• 구강회복응용과학지
• /
• 제18권3호
• /
• pp.197-204
• /
• 2002

Polymers are the dominant material for fabrication of denture bases. However, resin base can't fufill the patients' satisfactions completely and solve the pronunciation problem and prevent the denture fracture. In spite of many advantages, metal denture bases do not widespread in clinical practice. The main reasons are the difficulties in fabrication and additional time and cost, inability to rebase such prostheses. The use of the metal base can be one of options in complete denture treatments. This study helps, through reveiwing previous reports and literature about the metal base, metal base to be useful in the clinical application by recommend the materials, indications and advantage/disadvantage of the metal base and introduce variable designs. The clinical application of the metal base have many advantages, but the dentists have to select cases carefully and apply designs according to patient's various conditions. In conclusion, the use of the metal base can't alternate treatment of inadequate conventional complete denture. Adequate complete denture is very important for the treatment of the metal base complete denture.

• 가정과삶의질연구
• /
• 제34권3호
• /
• pp.95-111
• /
• 2016

The purpose of this study was to compare the factors affecting mother's satisfaction, word-of-mouth, and repurchase intention for the complete collection and monography picture books. Questionnaires from 323 5-year-olds' mothers in Seoul and Kyunggi province were analysed. The findings are as follows. Firstly, mother's product involvement and dual readership, and child's preference for picture books were common effective factors to improve mother's satisfaction, word-of-mouth, and repurchase intention. Secondly, reflection of child's opinions explained mother's satisfaction, word-of-mouth, and repurchase intention only for the monography, not for the complete collection. Thirdly, mother's product involvement had a direct effect on the repurchase intention of monography, while mother's subjective knowledge was more important for the repurchase intention of the complete collection.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권2호
• /
• pp.190-199
• /
• 2011

Unsteady flow simulations of complete helicopter configurations were conducted, and the flow fields and the aerodynamic interferences between the main rotor, fuselage, and tail rotor were investigated. For these simulations, a three-dimensional flow solver based on unstructured meshes was used, coupled with an overset mesh technique to handle relative motion among those components. To validate the flow solver, calculations were made for a UH-60A complete helicopter configuration at high-speed and low-speed forward flight conditions, and the unsteady airloads on the main rotor blade were compared to available flight test data and other calculated results. The results showed that the fuselage changed the rotor inflow distribution in the main rotor blade airloads. Such unsteady vibratory airloads were produced on the fuselage, which were nearly in-phase with the blade passage over the fuselage. The flow solver was then applied to the simulation of a generic complete helicopter configuration at various flight conditions, and the results were compared with those of the CAMRAD-II comprehensive analysis code. It was found that the main rotor blades strongly interact with a pair of disk-vortices at the outer edge of the rotor disk plane, which leads to high pulse airloads on the blade, and these airloads behave differently depending on the specific flight condition.