• 한국콘텐츠학회논문지
• /
• 제12권3호
• /
• pp.1-8
• /
• 2012

비디오 프레임 율 증가 변환은 가전 분야에서 매우 다양한 응용으로 인해 매우 많은 관심을 받아 오고 있다. 대 부분의 진보된 FRUC 알고리즘은 보간된 프레임들의 움직임 벡터장을 결정하는 움직임 보간 기술을 사용하고 있다. 그러나 몇 개의 응용 분야에서는 움직임 보상 보간 프레임이 얼마나 잘 복원되었는지에 대한 정보를 필요로 한다. 이와 같은 목적을 위해 본 논문에서는 프레임 기반의 적응적 예측에 기초한 움직임 보상 보간 프레임의 왜곡 예측 기법을 제안한다. 제안된 기법은 대칭형 움직임 탐색 및 보상 보간 기법에 적용되며, 세 가지 다른 예측 기법 즉, 순방향, 역방향 그리고 적응적 양방향 예측 기법으로 분석된다. 모의 실험을 통하여 제안된 적응적 양방향 왜곡 예측 방식이 다른 두 방식에 비해 성능이 우수함을 보인다.

• 한국콘텐츠학회논문지
• /
• 제13권5호
• /
• pp.28-36
• /
• 2013

비디오 신호에서 움직임 보상 보간 기술은 다양한 응용 분야를 갖는다. 프레임율 증가 변환이나 분산 비디오 부호화 기술에서는 효과적인 움직임 보상 보간 알고리즘을 필요로 한다. 이러한 응용 분야에서는 움직임 보상 보간 프레임에 대한 효과적인 후처리 기술을 통하여 화질을 개선하거나 또는 가상 채널 잡음을 줄임으로써 채널 전송 비트율을 줄이기 위해 각 블록 단위의 신뢰도 측정이 요구된다. 본 논문에서는 움직임 보상 보간 블록에 대한 시공간적 통계특성에 기초한 블록 기반의 신뢰도 평가방법을 제안한다. 제안한 방법은 현재 보간 프레임의 시간적 정합척도를 조사하고, 이 결과를 시간적 통계특성 뿐만 아니라, 공간적 통계특성을 조사하는 방법으로 설계된다. 모의실험을 통하여 제안한 방식은 기존의 단순한 시간적 정합 비용에 의한 방식에 비해 우수한 성능을 보인다.

• 한국지진공학회논문집
• /
• 제3권1호
• /
• pp.93-102
• /
• 1999

건물의 고층화가 이루어지면서 구조부재에 미치는 축력이 증가하게 되고 축소현상을 발생시킨다. 이러한 축소현상은 구조물의 사용헝 저하를 가져올뿐만아니라 2차 응력 발생으로 구조물 자체의 안전에도 영향을 미친다. 수직구조부재의 축소량을 예측하는 목적은 인접 부재간의 부등축소를 보정하는 데 있다 본 논문에서는 시공과정에서만 보정을 실시한 경우와 설계단계에서 축소량을 예측하여 보정을 한 경우에 대해 각각 지진하중을 적용하여 구조부재에 미치는 영향에 대해 비교.검토를 하였으며 수직구조부재의 축소량은 반드시 예측되어 보정을 실시하여야 하는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제32권10호
• /
• pp.823-830
• /
• 2008

We present a high-accuracy digital-to-analog (DA) actuator using a load spring, specially designed to compensate the output displacement errors caused by fabrication errors. The compensated linear DA actuator is capable to change the slope of input-output modulation line in order to compensate fabrication errors. We design, fabricate, and characterize three different prototypes: one uncompensated design and two compensated designs respectively for a specific value and for a given range of fabrication error. The compensated linear DA actuators show the output displacement errors of $-0.20{\pm}0.23{\mu}m\;and\;-0.13{\pm}0.18{\mu}m$, respectively, reduced by 64.3% and 76.8% of the output displacement error, $0.56{\pm}0.20{\mu}m$, produced by the conventional uncompensated linear DA actuator. We experimentally verify the fabrication error compensation capability of the present compensated linear DA actuators, thus demonstrating high-accuracy actuation performance immune to fabrication errors.

• 한국산업융합학회 논문집
• /
• 제8권2호
• /
• pp.97-104
• /
• 2005

Usually, propagation attenuation of millimeter wave occurs by rainfall, snowfall, temperature, effect of pressure of air. In 60GHz wave band wireless communication network, temperature change becomes big factor of propagation loss department. Also, temperature change causes disturbance of 60GHz frequency at transceiver. In this study, we used 60GHz transceiver and found propagation loss of wireless path and operating frequency disturbance characteristics. In transceiver that there is no temperature compensated device, operating frequency of TX changed by 60.865GHz at temperature of $-5^{\circ}C$, and appeared by 60.730GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 100MHz, greatly. But, in transceiver that there is temperature compensated device, operating frequency of TX changed by 60.830GHz at temperature of $-5^{\circ}C$, and appeared by 60.710GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 20MHz. According to these result, we constructed between buildings examination wireless site for point to point wireless communication using 60GHz band transceivers who have do temperature compensated device, and investigated data transmission characteristics about ambient temperature change. Therefore, if use transceiver that have temperature compensated device, may overcome the wireless transmission error in 60GHz band wireless communication LAN networks despite of ambient temperature change.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.1-11
• /
• 2004

In order to recognize thermal efficiency and power improvement in case that diesel cycle is turned into diesel-atkinson cycle, the fuel-air diesel-atkinson cycle considered gas exchange process is analyzed non-dimensionally and thermodynamically. As a result, in case of diesel-atkinson cycle, as expansion ratio is increased, thermal efficiency and mean effective pressure is increased and it has maximum value at Rec=1. When diesel cycle is turned into diesel-atkinson cycle by late intake valve closing timing, thermal efficiency and power is decreased because of the decline of effective compression ratio and intake airflow, but it could be compensated by increase of compression ratio or super-charged. In case compression ratio is compensated, Rec appears 1 around 100$^{\circ}$ ABDC, and it is expected that thermal efficiency is enhanced by 14.3% compared with conventional diesel cycle. In case compression ratio and intake airflow are compensated simultaneously, super-charged pressure is demanded 2.06bar at Rec=1 and it is more efficient when only compression ratio is compensated in the view point of thermal efficiency.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.202-207
• /
• 2002

EOC (Electro-Optical Camera) of KOMPSAT-1 (Korea Multi-Purpose SATellite) has been producing land imageries of the world since January 2000. After image data are acquired by EOC, they are transmitted from satellite to ground via X-band RF signal. Then, EOC image data are generated and pass through radiometric and geometric corrections to generate standard products of EOC images. After radiometric correction on EOC image data, Modulation Transfer Function (MTF) compensation is applicable on EOC images with user's request for better image quality. MTF compensation is concerned with filtering EOC images to minimize the effect of degradations. For Image Receiving and Processing System (IRPE) at KOMPSAT Ground Station (KGS), Wiener filter is used in MTF compensation for EOC images. If the Pointing Spread Function (PSF) of EOC system is known, signal-to-noise power spectra ratio is the only factor in the determination of Wiener filter. In this paper, MTF compensation in IRPE at KGS is introduced and MTF compensated EOC 1R images are generated using Wiener filters with various signal-to-noise power spectra ratios. MTF compensated EOC 1R images are correlated with EOC 1R images for observing linearities between them. As a result, the effect of signal-to-noise power spectra ratio is shown on MTF compensated EOC 1R images.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.34-40
• /
• 1999

In order to establish the design technique of the robust current controller in d.c series wound motor driver system, this paper proposes a method of the compensated Bang-Bang current control using d.c series wound motor driver system under the improperly variable load to get minimum time for the torque control. The compensated Bang-Bang current controller structure is simpler than that of PID plus Bang-Bang controller. This paper shows that a general 16 bits microprocessor is efficiently used to implement such an algorithm. The calculation time of software is extremely small when compared with that of conventional PID plus Bang-Bang controller. Both nonlinear operating characteristics of digital switching elements and describing function methods are used for the analysis and synthesis. Real-time implementation of the compensated Bang-Bang current controller is achieved. The concept of design strategy of the control and the PWM waveform generation algorithms are presented in this paper.

• 대한원격탐사학회지
• /
• 제19권1호
• /
• pp.43-52
• /
• 2003

EOC (Electro-Optical Camera) of KOMPSAT-1 (Korea Multi-Purpose SATellite) has been producing land imageries of the world since January 2000. After image data are acquired by EOC, they are transmitted from satellite to ground via X-band RF signal. Then, EOC image data are retrieved and pass through radiometric and geometric corrections to generate standard products of EOC images. After radiometric correction on EOC image data, Modulation Transfer Function (MTF) compensation is applicable on EOC images with user's request for better image quality. MTF compensation is concerned with filtering EOC images to minimize the effect of degradations. For Image Receiving and Processing System (IRPE) at KOMPSAT Ground Station (KGS), Wiener filter is used for MTF compensation of EOC images. If the Pointing Spread Function (PSF) of EOC system is known, signal-to-noise (SNR) power spectra ratio is the only variable which determines the shape of Wiener filter In this paper, MTF compensation in IRPE at KGS is briefly addressed, and MTF compensated EOC images are generated using Wiener filters with various SNR power spectra ratios. MTF compensated EOC images are compared with original EOC 1R images to observe correlations between them. As a result, the effect of SNR power spectra ratio on MTF compensated EOC images is shown.

• Journal of Korean Neurosurgical Society
• /
• 제29권12호
• /
• pp.1600-1605
• /
• 2000

Objective : World Health Organization and International Labour Organization, in June 8, 1999, requested that working conditions should be reformed ethically right and economically solid for 2.7 billion world labour force. The purpose of this study is to request compensable surgical therapeutic options and to suggest the renewal in cognizance criteria for worker's compensation, especially in spondylolisthesis. Methods : Regarding spondylolisthesis, we obtained data from Korea Labor Welfare Corporation(KLWC). Spinal disease occurrence incidences and medical fees of National Federation of Medical Insurance(NFMI) were analysed. The compensated 122 spinal instrumented cases included 117 male and 5 female patients, aged from 23 to 72 years old(mean : $45{\pm}9.85$). We compared Korean and Foreign Workers Compensation Law. Results : Numbers of herniated nucleus pulpus(78 cases), spinal fractures(34 cases) and dislocations(4 cases) were claimed after spinal interbody fusion operation and were compensated. These compensated degenerative diseases, work related illness, occurred in the course of work. A case of 52-year old spondylolisthesis patient with Disability Grade 8 was compensated by KLWC, according to its occurrence at work by accident. With exception of trauma at work by accident, current cognizance criteria were too narrow to be compensable, especially in surgical therapeutic option, for worker's spondylolisthesis. Conclusion : Considering both worker's compensation law and clinical pathologic progress, we believe that spondylolisthesis should be regarded as a compensable occupation related disease if and when aggravates rapidly in the course of work. We suggest a new cognizance standard to KLWC for labour welfare and proper worker's compensation.