• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.1-5
• /
• 2020

This study examined the effects of the addition of maleic anhydride-grafted polypropylene (PP-g-MA) and polyolefin elastomer (POE) on polyamide 66 (PA66) and polypropylene (PP) blends. The blends of PA66/PP with PP-g-MA and POE were prepared using a twin screw extruder. Mechanical testing results revealed that the tensile, flexural, and izod impact strengths of the blends were maximized at a PP-g-MA content of 2 phr. The increased mechanical strength of the blends with PP-g-MA was attributed to the compatibilizing effect of the PA66 and PP blends. In addition, as the POE content increased, the impact strength of the blends increased. However, at a high POE content, the tensile and flexural strengths decreased, seemingly because of the lower mechanical properties of POE.

• Macromolecular Research
• /
• v.13 no.4
• /
• pp.297-305
• /
• 2005

The compatibilizing effect of maleic anhydride (MA) in the immiscible blends of EVA22 (vinyl acetate content 22%)/ethylene-${\alpha}$-olefin copolymers with 1-butene (EtBC) and 1-octene (EtOC)) comonomers was studied. By adding 1, 2, and 3 phr of MA in the presence of dicumylperoxide, the morphology, tensile strength at break, and 100 and 300 % modulus of EVA22/EtBC and EVA22/EtOC blends were significantly enhanced. The melting point and crystallization point depression were observed upon the addition of MA. The changes in the ${\beta}$ transition and glass transition temperature of ethylene-${\alpha}$-olefin copolymers and ethylene-vinyl acetate copolymers, respectively, indicate that MA plays a role of compatibilizer for these immiscible blends. The TGA thermograms, measured from the blends with MA, show that thermal stability is slightly enhanced with MA, indicating that MA acts as a reinforcing agent either by grafting or crosslinking with other copolymers.

• Macromolecular Research
• /
• v.8 no.4
• /
• pp.186-191
• /
• 2000

Clay-dispersed nanocomposites have been prepared by simple melt-mixing of three components, i.e. poly (styrene co-acrylonitrile) copolymer (SAN), poly ($\xi$-caprolactone ) (PCL), and an organophilic clay(Cloisite(R) 30A). In the present study, poly($\xi$-caprolactone) was added in the mixtures in order to facilitate the intercalation of SAN into the gallery of silicate layers, and the molecular weight effects of PCL on the dispersion of silicate layers were compared by changing the amount of added PCL. The degree of dispersion of 10-$\AA$-thick silicate layers of clay in the nanocomposites was investigated by using an X-ray diffractometer and a transmission electron microscope. It was found that PCL added in the mixture facilitate the intercalation of SAN copolymers into the galleries of silicate layers modified with an organic intercalant, resulting in the better dispersion of clay. It was, also, observed that the processing temperature influences the degree of clay dispersion.

• Proceedings of the KAIS Fall Conference
• /
• 2006.11a
• /
• pp.283-286
• /
• 2006

식품 포장재로 사용되는 PP/EVOH/PP 다층 복합필름의 scrap 을 재활용하기 위한 기초연구로 상용화제 첨가한 PP/EVOH/Compatibilizer 블렌드의 상용화제 종류와 첨가량에 따른 재활용 수지의 열적 특성인 용융거동과 기계적 특성인 인장강도, 파단신률, 모듈러스 등의 특성을 조사하였다. 상용화제 Monato-s와 GMS를 각각 0.2, 0.5, 0.7 % 첨가한 블렌드 조성에서의 열적 특성과 기계적 특성을 확인한 결과 두 상용화제 모두 0.5 %이상의 조성 블렌드에서 PP/EVOH의 상용성을 얻을 수 있었다.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.523-528
• /
• 2008

Diglycidyl ether of bisphenol-A (DGEBA) was selected as a compatibilizer in Nylon 6 and bisphenol-A polycarbonate (PC) blends. SEM revealed a much finer morphology in the presence of DGEBA. The thermal properties, such as glass transition, melting point, crystallization temperature and rate, of the blends were examined using DSC. Overall, the introduction of DGEBA caused a strong dependence of these thermal properties on the composition due to compatibilization.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.31-37
• /
• 1993

Composites of styrene polymers with woody fibers were prepared, and the effect of compatibilizers on their mechanical properties was evaluated. To improve the compatibility of wood fibers and the matrix polymers, styrene-maleic anhydride copolymer(SMA) and maleic anhydride-modified polymers were used as compatibilizers. As results, maleic anhydride-modified polystyrene and SMA were proved to improve the tensile strength of the molded composites, and also were evaluated as good compatibilizers for the wood fiber polystyrene composite. Cellulosic fiber (dissolving pulp) provided better reinforcement than lignocellulosic fiber(thermomechanical pulp). On the contrary in the case of the composite of wood fiber and acrylonitrile-butadiene styrene copolymer(ABS), SMA and maleic anhydride-modified acrylonitrile-butadiene-styrene copolymer(MABS) did not act as compatibilizers. However, MABS was evaluated as a good polymer matrix to make wood fiber reinforced composite. The tensile properties of the composites of wood fiber and MABS were superior than those of wood fiber-ABS composites.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.2
• /
• pp.93-98
• /
• 2010

Polypropylene / montmorillonite / wood flour nanocomposites are melt-mixed by using a twin screw extruder. The montmorillonite is intercalated by the wood flour and the basal spacing of montmorillonite is increased with increasing the content of wood flour. The exfoliation constantly occurs by adding more than 10 wt.% of maleic anhydride-grafted polypropylene as the compatibilizer, which is used for improving the interfacial adhesion between matrix and filler. Also, the maleic anhydride-grafted polypropylene enhances the mechanical properties of the nanocomposites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4267-4273
• /
• 2011

In order to select the best compatibilizer for PE/asphalts mixtures, compatibilities of poly(ethylene-co-acrylic acid) and poly(ethylene-co-methacrylic acid) based ionomers with asphalts were investigated via optical microscopy, thermal analysis and rheology. By comparing the polarities of ionomers through an ultimate adsorption of moisture, it was observed that the compatibilities of ionomers increase with the increases of the polarities. By rheological investigations, some of ionomer were observed to be not only compatible but also miscible with asphalts.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.160-167
• /
• 2008

Nanocomposites with polypropylene/clay/wood flour were prepared by melt blending and injection molding. Thermal, mechanical and morphological properties were characterized. The addition of ballmilled clay, compatibilizer and wood flour significantly improved the thermal stability of the hybrids. The tensile modulus and strength of most hybrids was highly increased with the increased loading of clay, maleated polypropylene (MAPP) and wood flour (WF), compared to the PP/WF hybrids. The tensile modulus and strength of most hybrids were highly increased with the increased loading of ballmilled clay, MAPP and wood flour, compared to the hybrids with PP/WF. The transmission electron microscopy (TEM) photomicrographs illustrated the intercalated and partially exfoliated structures of the hybrids with ballmilled clay, MAPP and wood flour.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.1
• /
• pp.45-52
• /
• 1994

We present a theoretical study of the non-symmetrical A/BC polymeric system. The polymer blends consist of two phases, a pure polymeric phase A on one side and a mixture of polymers B as a compatibilizer and C on the other. The adsorption of homopolymer B to the interface improves the interfacial adhesion between two phases. By employing the functional integral techniques, we derive the mean-field equations and solve them numerically to obtain the interfacial properties including the concentration profiles in the limit of infinite molecular weight for the polymers. Thecalculations of the interfacial properties are performed for typical values of the Flory X parameters and the volume fraction of polymer B in the asymptotic mixture phase. The interfacial adsorption of polymer B and the degrees of the specific interaction between the polymers play an important role in modification of the interfacial properties.