• 제목/요약/키워드: compass

검색결과 382건 처리시간 0.025초

전자 나침반과 적외선 광원 추적을 이용한 이동로봇용 위치 인식 시스템 (Localization System for Mobile Robot Using Electric Compass and Tracking IR Light Source)

  • 손창우;이승희;이민철
    • 제어로봇시스템학회논문지
    • /
    • 제14권8호
    • /
    • pp.767-773
    • /
    • 2008
  • This paper presents a localization system based on the use of electric compass and tracking IR light source. Digital RGB(Red, Green, Blue)signal of digital CMOS Camera is sent to CPLD which converts the color image to binary image at 30 frames per second. CMOS camera has IR filter and UV filter in front of CMOS cell. The filters cut off above 720nm light source. Binary output data of CPLD is sent to DSP that rapidly tracks the IR light source by moving Camera tilt DC motor. At a robot toward north, electric compass signals and IR light source angles which are used for calculating the data of the location system. Because geomagnetic field is linear in local position, this location system is possible. Finally, it is shown that position error is within ${\pm}1.3cm$ in this system.

GPS 위치정보를 이용한 선박용 GPS-Compass 개발에 관한 연구 (The Study on the Development of a Ship's GPS-COMPASS Using GPS Position Information)

  • 고광섭;임정빈;심영호
    • 한국항해학회지
    • /
    • 제20권3호
    • /
    • pp.73-84
    • /
    • 1996
  • 선진국에서의 GPS 위성정보를 활용한 자세결정 센서개발은 새로운 GPS 관련연구 분야로 떠오르고 있는 실정이다. 지금까지 국제학회에 보고된 대부분의 연구는 GPS 위성신호의 Carrier phase 측정을 통해 고중차등을 이용한 방법으로 주로 3-D 자세결정방식에 치중하고 있으나, 아직 실무에서의 활용은 이른 것으로 알려지고 있다. 본 논문은 GPS 위성신호의 범용이 C/A 코드 프로세싱 GPS 수신기 정보를 활용하여 선박의 방위센서 개발에 관한 연구이다. 본 연구에서는 1차적으로 GPS 위성신호의 오차벡터를 진시간으로 측정 및 분석을 통해 GPS 위성오차중 가장 심각한 S/A 오차 발생기간에도 방위센서 구측을 위한 정보획득에는 문제가 되지 않음을 확인하였고, 수신된 Two-Point 위성정보를 이용 새로운 선박의 방위센서 "GPS-Compass"를 구측 비선형 모델하에서의 해상 실험을 통해 본 연구에서 제시한 "GPS-Compass"의 새로운 선박 방위센서로의 활용가능성을 보였다.박 방위센서로의 활용가능성을 보였다.

  • PDF

DGPS와 Gyro Compass를 이용한 트랙터의 자세검출 (Posture Sensing of a Tractor Using a DGPS and a Gyro Compass)

  • 정선옥;박원규;김상철;박우풍;장영창
    • Journal of Biosystems Engineering
    • /
    • 제23권2호
    • /
    • pp.179-186
    • /
    • 1998
  • This study was conducted to sense posture of an autonomous tractor using a DGPS, a gyro compass, and a potentiometer. Posture sensing system was constructed and its accuracy was evaluated. The accuracy of DGPS was evaluated under stationary and moving conditions, and the performance of the gyro compass and the potentiometer was investigated by measuring bearing and steering angles, respectively. Also, the effect of DGPS interference by obstacles was evaluated experimentally. The position accuracy was about 6.6cm(95%) under the stationary condition and 10 cm at sharp turning condition. Steering angle of the tractor could be related linearly to the output of the potentiometer that was installed on the rotating center of a knuckle arm. The positioning accuracy of the DGPS varied significantly according to the number of visible GPS satellites, but was good with more than 7 satellites. The DGPS gave bad solutions for sensing the posture of tractor when signals from satellites or the correction data from the base were interfered by obstacles.

  • PDF

자기저항소자를 이용한 전자 컴파스 개발에 관한 연구 (A Study on the Development of Electro Magnetic Compass Using Magnetic Resistance Element)

  • 양주호;김창화;박태원;문덕홍;이일영
    • 동력기계공학회지
    • /
    • 제3권1호
    • /
    • pp.60-66
    • /
    • 1999
  • Most of the small-type fishing boats in this country don't have the autopilot system such as the large ships have. In this papers, we describes on the development of electro magnetic compass for the autopilot system of the small-type fishing boat, which is utilized the MR(magnetic resistance) device and the inclination sensor. And we investigated the validity of the developed electro magnetic compass through results of actual experiment.

  • PDF

선박 컴퍼스 갑판 구조물의 저진동 최적설계 (Optimum Design for Vibration Reduction of Compass Deck Structure in Ship)

  • 공영모;최수현;송진대;양보석
    • 대한조선학회논문집
    • /
    • 제42권3호
    • /
    • pp.249-258
    • /
    • 2005
  • Recently, the vibration reduction at a local structure such as compass deck has been continuously requested by ship owner and shipbuilder. Because crews are afflicted with vibration, severe vibration problems even bring about a damage of structure. This study conducted to get an optimized stiffener size of compass deck to reduce the vibration level and decrease the weight of structure in ship. NASTRAN external call type optimization software (OptShip) which makes use of NASTRAN as a solver is used as an optimization tool. The results indicate that the optimum design is promising for real applications.

Compass Gradient Edge 연산자의 새로운 해석방법 (A New Interpretation of the Compass Gradient Edge Operators)

  • 박래홍;최우영
    • 대한전자공학회논문지
    • /
    • 제24권1호
    • /
    • pp.97-101
    • /
    • 1987
  • The edge, a discontinuity or abrupt change in the gray-level or color, is a fundamentally important primitive feature of an image necessary for the image analysis and classification. Two-dimensional 3x3 compass gradient operators (ex. Sobel, Prewitt, and Kirsch operators)are commonly used in the edge detection and usually detect 8 compass directional components. In this paper, we present a new interpretation of the relationships between the resulting 8 gradient magnitudes and the 8 intensity values of neighboring pixels which are covered by the two-dimensional 3x3 mask. It is expected that a new gradient edge operator may be designed by changing the eigenvalues in the transform domain and the fast optical edge operator may be implemented by using the optical system.

  • PDF

전자 나침반과 초음파 센서를 이용한 이동 로봇의 Simultaneous Localization and Mapping (Simultaneous Localization and Mapping of Mobile Robot using Digital Magnetic Compass and Ultrasonic Sensors)

  • 김호덕;서상욱;장인훈;심귀보
    • 한국지능시스템학회논문지
    • /
    • 제17권4호
    • /
    • pp.506-510
    • /
    • 2007
  • 전자나침반(DMC)은 실내의 전자기적 요소나 강한 자성체 건물구조에서는 쉽게 방해를 받던 나침반보다 실내에서 간섭에 강한 특징을 가지고 있다. 그리고 초음파 센서는 물체와의 거리를 계산해 줄뿐만 아니라 값싼 센서로서 경제적인 이점을 가지고 있어 Simultaneous Localization and Mapping(SLAM)에서 많이 사용하고 있다. 본 논문에서는 자율 이동 로봇의 구동에서 전자나침반과 초음파 센서를 이용한 SLAM의 구현에 대해 연구하였다. 로봇의 특성상 한정된 센싱 데이터만으로 방향과 위치를 파악하고 그 데이터 값으로 가능한 빠르게 위치 측정을 하여야 한다. 그러므로 자율 이동 로봇에서의 SLAM 적용함으로 위치측정의 구현과 지도 작성을 수행한다. 그리고 SLAM 구현상의 주된 연구 중의 하나인 Kid Napping 문제에 중점을 두고 연구한다. 특히, 위치 측정의 구현을 수행하기 위한 데이터의 센싱 방법으로 초음파 센서를 사용하였고 비슷한 위치의 데이터 값이 주어지거나 사전 정보 없는 상태에서는 로봇의 상태를 파악하기 위해서 전자 나침반을 사용하였다. 그래서 자율 이동 로봇의 위치를 정확하게 측정하기 위해서 활용하였다.

GPS 신호 단절 상황에서 IMU 사양에 따른 보조센서 통합을 이용한 정확도 분석 (Accuracy Analysis using Assistant Sensor Integration on Various IMU during GPS Signal Blockage)

  • 이원진;권재현;이종기;한중희
    • 한국측량학회지
    • /
    • 제28권1호
    • /
    • pp.65-72
    • /
    • 2010
  • 본 연구에서는 MMS인 경우 고성능의 중급 IMU가 사용되고 보행자 항법시스템에서는 MEMS형의 저급 IMU가 사용된다고 가정한 후 GPS 신호가 단절되었을 경우 IMU에 의해 생성되는 위치 및 자세 오차를 시뮬레이션을 통하여 계산하였다. 또한 GPS 신호 단절 시에 고도계, 전자나침반 및 2가지 센서를 동시에 이용하는 MultiSensor를 이용하여 중급 및 저급 IMU를 보정하였을 경우의 정확도 향상 효과를 분석하였다. 실험 결과 중급 IMU의 경우 MMS에서 요구되는 3차원 위치오차 정확도가 5m라고 가정할 경우 GPS 단절 시간이 30초가 넘으면 요구 정확도를 만족하지 못하였다. 하지만 GPS 단절 구간에서 고도계 전자나침반 그리고 MultiSensor를 이용하여 IMU 보정을 수행할 경우 약 60초까지 요구정확도를 만족하였다. 또한 고도계 및 전자나침반을 동시에 사용할 경우 고도계에 의한 영향이 더욱 큰 것으로 판단된다 MEMS IMU와 같은 저급 IMU가 사용되는 보행자 항법 시스템의 요구 위치 정확도가 약 20m라고 가정할 경우 4초 이후에는 요구 정확도를 만족하지 못하였으며 자세 오차도 매우 급증하였다. 하지만 GPS 신호 단절시 보조센서를 이용하여 저급 IMU 보정을 수행하였을 경우 약 15초까지 요구 정확도를 만족할수 있을 것으로 시뮬레이션 결과 예측되었으며 또한 중급 IMU 실험과는 반대로 보행자 항법과 같은 속도가 느린 시스템에서 고도계 및 전자나침반 2가지 센서를 동시에 사용할 경우 전자나침반에 의한 영향이 더욱 큰 것으로 나타났다. 본 연구는 GPS 신호 단절이 발생할 수 있는 지역에 대하여 MMS 또는 보행자 항법시스템을 운용할 경우 요구 정확도에 따른 보조센서 통합을 이용하여 정확도를 높이는 자료로써 사용될 수 있을 것으로 예상된다.