• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.7
• /
• pp.1019-1028
• /
• 2004

The purpose of this study was to compare the body measurements of cyclists and non-cyclists and to classify cyclists＇ body types to offer basic information for the bicycle apparel manufacturer in Korea. The anthropometric data was collected including both direct and indirect measurements of 81 cyclists (40 female, 41 male) aged from 19 to 24. Anthropometric measurements were analyzed using percentiles, T-test, factor and cluster analysis. The results were as follows; Comparison of anthropomeoic data between cyclist and non-cyclist was to clarify that cyclists have bigger size than non-cyclists; especially the thigh circumference shows big differences. As the result of factor analysis, 5 factors, which explain 74% of variance, were extracted from all items for male and female cyclists. The results of cluster analysis classified body types into 3 groups. Cluster 1 among three female cyclist groups has biggest torso and had an erect back. Cluster 2 has small size among three female group and drooping shoulders. Cluster 3 has the bended forward shoulders and shows the protrusion back. In case of male cyclists, cluster 1 has thin body type owing to big height measurements and small girth measurements. Cluster 2 among three male groups has the biggest torso and thigh circumference. Cluster 3 has big forward angle of shoulders and shows the protrusion of the back as female cyclist.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.195-200
• /
• 2010

Numerical investigation was conducted to study the effects of after-body configurations and nozzle lip on the PIFS(Plume Induced Flow Separation) and eat flux to the base face. Two dimensional and axi-symmetric non-equilibrium Navier-Stoke's solver with $k-{\omega}$ SST turbulence model was used to solve the launching vehicle type configuration with propulsive jet. The experimental result of Robert J. McGhee was compared with our computational results for code validation. Three types of the after-body configurations (Straight, Boat-tail, Flare type) were simulated for this study. And the nozzle lip effect was studies using the three types of base configurations same simulation conditions. As a result of numerical investigations, higher pressure ratio condition and boat-tail after-body configuration caused severe PIFS phenomenon but the flare type after-body configuration and low pressure ratio suppressed PIFS. Flare type after-body configuration and low pressure ratio case reduced heat flux to base face. The nozzle lip dispersed the heat flux widely along the base face and the nozzle lip.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.3
• /
• pp.15-26
• /
• 2018

The purpose of this study is to understand the characteristics of body types of adult woman under 155cm in height. To do this, direct measurement data showed that only 660 women aged 20~69 years old and under 155cm tall were classified, and their body type characteristics were analyzed. There are 51 body measurement items used in the analysis. The results of the study are as follows: As a result of the comparison of the body size of all adult women and women under 155cm, it was seen that short women were smaller than the all women, and were flattened with a slightly plump and bendless body. Factor analysis was performed to classify the body type of short women. Six factors including body size, body height, shoulder length and width, waist back length, hip length, and shoulder angle were measured. The results of cluster analysis, using factor scores, were classified into three types. Type 1 is taller among short women and slightly slimmer, and is an A-shape. Type 2 has the largest BMI and was the middle stature among short women It is the most obese body type and is an H-shape. Type 3 is short and plump, with a poor hip and is a Y-shape. As a result of crossover analysis, there was a difference in the body type characteristics of each age group. After all, the body type of the short adult women under 155cm was clearly different from those of all adult women, there was also a difference in the body type among short adult women.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.2
• /
• pp.89-100
• /
• 2012

The purpose of this research is to compare the body proportion of the Mongolian and Korean men and women in their 20' s by comparing the characteristics of the body type that uses the body indexes, in order to provide the base data for the increased fit of the apparels. The results are as follows. 1) Histogram of the Rohrer' s Index for the Mongolian men and women in their 20s was examined. the Mongolian men, normal body type took up 48.0% while small body type comprised 50.0% and obese body type comprised 2.0%. the Mongolian women, normal body type comprised 61.5%, small body type comprised 22.1% and obese body type comprised 16.4%. 2) The body proportion of Korean men has 1:1.62 with upper body and low body part on a waist basis, and Mongolian men has 1:1.65. Thus Mongolian men has longer pan of lower body than Korean men. 3) Mongolian women has longer part of lower body and has higher rates of hip height, crotch height, knee height than Korean women. Mongolian women has high rate of hip line and calf length. 4) As a result comparison using the body index of Mongolian and Korean women (bust thickness/ bust width, waist thickness / waist width, hip thickness / hip width, when regarding the height as 100 ), it was found that Mongolian women are flatter than korean women.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.6
• /
• pp.631-640
• /
• 2012

This research project investigates the differences of various body locations (between 3D body models) and drapes garments digitally onto 3D body models. Three different subject models will be given explication. It consisted of (1) data collection of three-dimensional scans (2) creation of 3D body representations (3) comparison of avatar shapes and measurements (4) visualization and assessment of 3D body models and their 3D virtual garments. The study tests a theory of impact by differences in avatars by pattern design. A visual inspection of avatars showed clear differences between the six avatar types (in the generating process); however, there was notably less difference between 3D garment simulations based upon the six avatars produced. This demonstrated that there was less influence on the 3D garments than was predicted after a visual inspection of the avatars.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.961-970
• /
• 2014

Several retailers such as Target and Kohle's and their vendors have piloting the 3D clothing simulation programs to produce garment samples. However, few studies have verified the virtual fit information and 3d visualization process for pants, and no study compared the commercial 3D virtual programs. This study is designed to analyze similarity of fit and appearance between real pants with 3D virtual pants based on three 3D virtual programs (Optitex, CLO 3D, and i-Designer), three lower body types (slim, normal, and thick waist type), and fit status. We selected a representative model for each lower body type, produced their custom pants according to Lee and Nam's method(2007), and took photos of front, side and back view for visual analysis. Then, we virtually tried each model's custom pants on her parametric avatar developed by manually inputting their body measurements using the three 3D virtual program. Thirty fit experts compared the real fit to virtual fit. This study found that 'Optitex' and 'i-Designer' can visualize more effectively than 'CLO 3D' in many fit locations. Regarding the body types, 3D virtual program can visualize pants fit for 'thick waist body type' more preciously than the other body types. With respect to fit status, it does not affect much on the similarity overall.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.4
• /
• pp.608-621
• /
• 1993

The Purposes of this study were 1)to find the body surface total line and segment line significantly(${\alpha}$=0.05) changed by the leg movement including all movement direction of hip joint, knee joint and ankle joint for the more functional clothing. 2)to classify them into 3 types-expansion type, contraction type, expansion & contraction type, and 3)to identify the characteristics of the body surface length changes. 10 Crosswise and 5 lengthwise body surface total lines and 48 crosswise & 39 lengthwise body surface segment lines of 26 female college students aged from 18 to 24 years were measured directly on the body surface and were analyzed by ANOVA & Multiple Comparison Test (Tukey). The results were as following : Body surface total lines significantly changed were all the body surface total lines except abdoman girth, 1/2thigh girth of lower leg and ankle girth, and these were classified into 3 types : Center front leg line belonged to expansion & contraction type, whereas lateral leg line, legscye girth, and total crotch length belonged to contraction type. The rest belonged to expansion type. Knee girth showed maximum expansion, whereas center front leg line showed maximum contraction. Body surface total lines have shown large expansion crosswise whereas lengthwise they have mainly shown contraction. At least more than one component segment line of each body surface total lines except abdoman girth and ankle girth have shown significant change. Top segment of inner leg line showed maximum expansion. whereas just below top segment of center front leg line showed maximum contraction. Crosswise all the body surface segment lines have shown expansion except inner back segments of thigh girth and 1/2thigh girth of upper leg which have shown contraction. Lengthwise they have shown both expansion and contraction according to the location of front or back, and below or upper 1/2thigh girth line except the component segment lines of lateral leg line, which has shown contraction only.(cf. figure 2. figure 3. and table 2-2).

• Journal of the Korean Home Economics Association
• /
• v.35 no.4
• /
• pp.79-94
• /
• 1997

This study was performed to develop a basic stacks pattern for middle-aged women reflecting the characteristics of their lower body types. Anthropometric measurements using sliding guage method were carried out for 4 women 40's For the analysis of the lower body types horizontal and vertical section maps obtained by sliding gauge method and 2 indices were produced. Based on the slacks construction components produced by the drafts of their lower body surface experimental slacks pattern was designed. Multiple comparison test was used to compare 3 existing slacks patterns with the experimental pattern. 1. The results of the body section map analysis were as follows: 1) In the frontal view silhouette of vertical section maps there were less individual differences in items with skeleton landmarks than those without them. 2) In the shape of horizontal section maps waist section represented more round shape than the others and thigh maximum width section had the flattest shape. Flat ratios(depth/width) of subjects were much higer than those of young women which clarified the change of depth was bigger than that of width with aging process. 2. The slacks construction components for pattern drafting were as follows: 1)Ease amount of waist was 0.5cm and front and back waist girth difference was 1.2cm Ease amount of hip was 1,8cm and front and back hip girth difference was 0.7 cm 2) The amount of dart intake incresed in the order of side(4cm) back(3,6cm) from (2.8cm) The length of dart leg incresed in the order of front side back.

• Journal of the Korean Society of Costume
• /
• v.64 no.5
• /
• pp.108-124
• /
• 2014

The purpose of the study is to figure out the difference in preference of clothes between Korean and Chinese female college students, who share similar ethnic traits despite having different sociocultural backgrounds and environment, and see the differences in their body image and body satisfaction. The questionnaire-based survey for the study was conducted for about a month and a total of 449 copies of the questionnaire were collected for the final research. For the research method, we examined the differences in clothes preference and fit between Korean and Chinese students, and then the corresponding differences in body image and body satisfaction. The result showed significant differences in the categories of skirt length, pants length, upper garment fit, and lower garment fit. Korean students preferred slim fit clothes, while their counterparts preferred natural fits. A comparison of body image between Korean and Chinese female students showed that the Korean students had lower body satisfaction levels, and viewed themselves as fat even though they were slimmer than their counterparts. The conclusion of the analysis was that compared to Korean students the Chinese students pursued a more comfortable and casual style, preferring unique and diverse designs instead of simply following a fashion trend.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.159-179
• /
• 2006

This research checked about the necessity for the development of men's dress forms in the first investigation for the educational circle and the men's wear industry. Somatotype characteristics were analyzed in the second investigation of body measurement with the subjects of 200 male adults in their twenties residing in Busan. The following are the results of the present research to develop male dress forms for patternmaking: 1. In the group analysis for the characterization of front body types, three somatotypes were found and named H, Semi X, and Y. In the cluster analysis of side body types, four types were identified: D, I, d, and q. In the combination of front and lateral body types, four kinds were chosen: semi X-I, semi X-q, semi Y-I, and Y-q. 2. Through the comparison of plane figures by the plaster method as well as horizontal and vertical cross sections by the sliding gauge method, semi X-I was finally chosen as the standard somatotype for male dress form development. 3. Compared with the sliding gauge method of the present dress forms, the research dress form reflected better the shapes of the parts of the back and hips and the position of the waist, especially for males in their 20's. In addition, the dress form in the current research had superior points in all the items of clothing evaluation. Based on the above results, the sizes and models of the men's dress forms for patternmaking were developed.