• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1749-1752
• /
• 2007

The Near to Eye Display (NED) solves the problem of having a display larger than a small portable device. The virtual image of the NED is created using a microdisplay and imaging optics. It is important that the optics does not interfere with the human visual system and that the device is light, compact and easy to wear. In this paper the principles of a biocular NED, which is based on a novel diffractive Exit Pupil Expander (EPE), are presented. The optical system is compact and intrinsically free from distortions and misalignments.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.835-839
• /
• 2004

For factory automation using force/torque control, we need a networked-force management system as well as good force sensing and force generation. In this paper, we present a web-based force management system including 6-axis force/torque sensing system. Performance of the force-torque sensor is affected significantly by analog noise that is included in a sensor signal, and the noise should be reduced appropriately to obtain an adequate performance of the sensor. Moreover, the sensor itself should be convenient to install to a real application system. It should be compact in size and also easy to wire in real situation. In this viewpoint, we developed usb-based compact sensor system which is well communicated using web between two computers that exist far away. Software is programmed using LabVIEW and CCS-C. PIC microcontrollers are used for implementing a compact hardware. The proposed system is verified through experimental works.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.1
• /
• pp.8-13
• /
• 2011

A compact array system of small buoys is used for wave energy extraction. To evaluate the performance of this system, hydrodynamic analysis is carried out in regular waves using the higher order boundary element method. The motion response of each buoy is calculated considering hydrodynamic interactions caused by other buoys. The effect of energy extraction device is modeled as a linear damping load. The efficiencies of energy conversion are compared using the various sizes and arrangements of the array system and the damping coefficients for energy extraction. The increase in size or the packing ratio of the system gives better efficiency. However, the wave condition and the cost for the system should be considered to optimize performance from the perspective of engineering and economics. The proposed nondimensionalized damping coefficient for energy extraction is 0.1~0.5.

• Kyungpook Mathematical Journal
• /
• v.49 no.3
• /
• pp.425-433
• /
• 2009

In this paper, we give the internal characterizations of compact-covering s-(resp., ${\pi}$-)images of locally separable metric spaces. As applications of these results, we obtain characterizations of compact-covering quotient s-(resp., ${\pi}$-)images of locally separable metric spaces.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.248-255
• /
• 2004

For the compactness of regenerative combustion, self regenerative combustion and embedding regenerator inside furnace are proposed. The Self Regenerative burner system was developed to enhance thermal efficiency and Low Nox emission. In the twin regenerative system, two burner heads are generally used for preheating and exhausting combustion mode. But self regenerative burner system use only single nozzle body for regenerative combustion. Also two kind of regenerator, internal and external type, were designed to operate conveniently in both large and small furnace. According to test result, the self regenerative combustion system gives strong internal exhaust gas recirculation that reduce NOx emission significantly. NOx was measured as 50ppm(5% O2, 1290C furnace temperature). Also it is found that the fuel saving rate due to the self regenerative burner system reach to 30-40%. Thus it can be concluded that self regenerative mild combustion system appears to provide a reasonable regenerative burner for compactness and high performance as compared with conventional twin regenerative burner system. Also in the RT Application , compact twin regenerative burner was developed with the help of embedding regenerator inside furnace.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1956-1957
• /
• 2007

본 논문에서는 모델기반의 제어기 설계 프로그램인 National Instruments(NI)사의 System Identification Toolkit과 Control Design Toolkit, Simulation module을 사용하여 기존의 제어기 설계방식 보다 쉽고 편리하게 제어기를 설계할 수 있었다. 직류전동기의 속도 제어시스템을 구현하기 위해서 하드웨어는 NI사에서 제공하는 실시간 제어기(Real-Time Controller:RT) CompactRIO를 사용하였다. 먼저는, 테스트 입력 신호를 전동기에 인가하고 얻은 출력신호를 통해 제어대상 플랜트인 직류전동기 구동시스템의 전달함수를 구할 수 있었다. 다음으로는 원하는 제어응답성능을 갖는 극점, 영점 제어기를 설계한 후, 모의실험을 통해 속도제어응답을 확인할 수 있었고, 실시간프로그램으로 다운로드하여 실제 전동기 구동시스템의 실험을 통해서 설계된 속도제어기의 응답 결과를 모의실험과 비교하여 검증하였다.

• International Journal of Automotive Technology
• /
• v.8 no.4
• /
• pp.403-411
• /
• 2007

This article describes a methodology based on experiments and 1D modeling work related to the exhaust system analysis of a small two-stroke engine. The primary goal of this work was to understand how the design criteria of a compact exhaust system influenced the exhaust port pressure, since its evolution controls not only engine performance but also exhaust emissions. On the experimental side, a fully instrumented 50cc two-stroke engine was used to check the behavior of three different exhaust systems. A problem related to instantaneous pressure measurements in unsteady, hot flow was detected and solved during the study. To build the 1D model of the three exhaust systems, experimental information on the steady flow and the impulse test rigs was obtained under controlled conditions in specific facilities. Accurate comparisons between measured and calculated exhaust port instantaneous pressures were obtained from the following different exhaust system configurations: a straight duct, a tapered pipe and the three compact exhaust systems. The last step in the method used this model to analyze the pressure waves inside the exhaust system and detect the influence of the geometric parameters. The results should lead to improvements in the design process of complex compact exhaust systems in two-stroke engines.

• Progress in Superconductivity and Cryogenics
• /
• v.13 no.2
• /
• pp.25-28
• /
• 2011

A compact phase controller of pulse tube refrigerator is proposed in this paper. Most pulse tube refrigerators available now consist of a long inertance tube and reservoir as the phase controller. The long inertance tube and reservoir present a challenge for compact packaging in some applications. To overcome this disadvantage, the long inertance tube and reservoir are replaced with the compact phase controller consisted of mass, spring and damper in pulse tube refrigerator. This process is achieved using similarity of mechanical, electrical, and acoustic system and the specific configuration of the compact phase controller is designed. From the simulation code in this paper, the performance of pulse tube refrigerator with the designed compact phase controller is confirmed to be comparable to pulse tube refrigerator with the long inertance tube and reservoir.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.4
• /
• pp.126-132
• /
• 2008

The vibration and disturbances from operating the compact disk layer have an effect on the play ability. As the excitation sources of the compact disk player, there are the vibration of the motors and gears, impact by mechanical parts and the external excitations. So, most of the compact disk player have a anti-vibrational system, which is included some rubber or oil dampers. In this study, the vibration characteristics of rubber damper which is used home compact disk player are investigated. The materials and shape of rubber damper are changed, and the transmissibility is measured. As a conclusion, the natural frequency is moved to higher frequency and the transmissibility is reduced by the increasing rubber stiffness. In comparison to butyl rubber damper, the transmissibility of silicon damper was increased by larger restitution elasticity. The hollow damper was effective to reduced the transmissibility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.519-529
• /
• 1993

A spectral and power efficient modulation technique, named Compact Superposed Quadrature Amplitude Modulation (Compact-SQAM), is introduced. The performance of Compact-SQAM system, in a Linearly and nonlinearly amplified single and multicarrier environment, in the presence of additive white Gaussian noise(AWGN), intersymbol interference(ISI), timing jitter and adjacent channel interference (ACI), is experimentally analyzed via computer simulation. Various channel conditions, such as channel spacing, between the main and adjacent channels and fade depth on the desired main channel, are examined. Our result shows that Compact-SQAM, and better P(e) performance that other modems using simple Butteroworth type postdetection receive filters. Especially, Compact-SQAM modem achieves higher efficiency of frequency utilization and better P(e) performance than other modems in the severly bandlimited nonlinear multicarrier channels.