• 전기의세계
• /
• v.26 no.3
• /
• pp.76-83
• /
• 1977

The choice of control method and circuit must be decided after a broad inspection with the characteristics of load and control elements as well as that of electric and mechanical nature. In the present study, Pulse width modulated(PWM) SCR chopper was chosen and for the electric commutation, Jones' forced method was taken bacause of its having enough reverse bias energy. Objectives of experimentation by this system are; 1) the condition of SCR as a gate trigger pulse. 2) the observation of phenomena at the time of forced commutation 3) the experimentation on characteristics of speed control by PWM chopper. Above experimentation shows good characteristics, however, in the limit of narrow gap between the ON and OFF pulses, a complete control was not possible. So, that must be the point to be studied further alone with the harmonics influence.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.89-95
• /
• 1978

A SCR static breaker was studied on the Resistive and inductive load, then on the overload break circuit using operational Amplifier. In this paper, the principal circuit required for forced commutation was voltage commutation by the introduction of a parallel Capacitor. The results obtained are follows; 1. In thecondition that the tima constant of R-C circuit is larger than the turn off time of SCR, the breaker has low transient phenomena and no recovery vol age. 2. By using OP Amplifier on the load circuit, overcurrent trip point will be able to adjust to the wide range of over current. 3. In the over current qrcuit, the power loss was reduced remarkably.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.419-422
• /
• 2008

This paper presents a novel prototype of ZCS-PFM high frequency series resonant Inverter using IGBT power module for electromagnetic induction eddy current-heated roller in copy and printing machines. The operating principle and unique features of this voltage source half bridge inverter with two additional soft commutation inductor snubber are presented Including the transformer modeling of induction heated rolling drum. This soft switching inverter can achieve stable zero current soft commutation under a discontinuous and continuous resonant load current for a widely specified power regulation processing. The experimental results and computer-aided analysis of this inverter are discussed from a practical point of view.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1061-1062
• /
• 2006

This paper represent improved On-line Turn off, commutation Angle control schemes for switched reluctance motors based on current control. For the purpose of the finding optimal commutation switching angle point, it is utilized turn on and turn off position calculation with inductance vs. current vs. flux linkage analysis method. The goal of proposed paper is the maximization of the energy conversion per stroke and maximizing efficiency and obtaining approximately flat-topped current waveform. The proposed control scheme is demonstrated on a simulation experimental result.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.4-7
• /
• 2005

본 논문에서는 역기전력을 고려한 새로운 토크모델인 CDTP(Commutation Delay Time and Point) 제어기법을 이용하여 실제 역기전력을 고려한 BLDC(Brushless DC)전동기의 토크맥동에 대하여 연구하였다. BLCD 전공기의 상전환(Commutation)시 발생하는 토크맥동에 대하여 기술하였으며 토크맥동의 원인이 되는 역기전력과 전류와의 관계를 고찰하였다. 이를 바탕으로 토크맥동의 개선을 위하여 상전환시점과 상전환기간을 고려한 CDTP 제어기법을 제안하였으며 맥동토크의 저감효과에 대하여 해석하였다. 또한 BLDC 전동기의 실제 역기전력을 고려하기 위하여 Hague의 해석방법에 따른 역기전력의 다양한 형태를 살펴보고, 제안한 CDTP기법을 적용하여 기존 방법을 통한 토크맥동 제어방법과 비교 ${\cdot}$ 검토하였다. 이의 검증을 위하여 MATLAB/Simulink를 이용하여 제안한 방식의 토크맥동 저감방법의 타당성을 살펴보았다.

• Journal of Power Electronics
• /
• v.7 no.2
• /
• pp.124-131
• /
• 2007

In this paper, a novel type of auxiliary switched capacitor assisted edge resonant soft switching PWM resonant DC-DC converter with two simple auxiliary commutation lossless inductor snubbers is presented. The operation principle of this converter is described using the switching mode equivalent circuits. This newly developed multi resonant DC-DC converter can regulate its DC output AC power under a principle of constant frequency edge-resonant soft switching commutation by an asymmetrical PWM duty cycle control scheme. The high frequency power regulation and actual power characteristics of the proposed soft switching PWM resonant DC-DC converter are evaluated and discussed. The operating performances of the newly proposed soft switching inverter are represented based on simulation results from an applications point of view.

• Bulletin of the Korean Mathematical Society
• /
• v.26 no.1
• /
• pp.43-46
• /
• 1989

In this paper, we are concerned with the pointwise-hypoellipticity (see Definition 2.1) of an m-dimensional Frobenious Lie algebra L of analytic complex vector fields in somel open subset .ohm. of $R^{m+1}$. That is, L is a set of complex vector fields in .ohm. with (real-) analytic coefficients satisfying: (A) each point of .ohm. has an open neighborhood in which L is generated by m linearly independent elements of L; (B) L is closed under the commutation bracket [A, B]. The pointwise-analytic hypoellipticity of L is completely characterized by M.S. Baouendi and F. Treves in [1]. Here, we shall prove that if L is hypoelliptic at a point then it must be analytic hypoelliptic in a full neighborhood of the same point. When the coefficients are $C^{\infty}$, hypoellipticity of L was discussed in [2].2].

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.226-228
• /
• 2006

This paper presents the two lossless auxiliary inducors-assisted voltage source type half bridge(single ended push pull:SEPP) series resonant high frequency inverter for induction heated fixing roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation forwide its output power regulation ranges and load variations under constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operatprinciple is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation charactertics-based on the high frequency PDM strategy. The experimenoperating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimenones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliimplemented here is proved from the practical point of view.

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.1
• /
• pp.57-68
• /
• 1989

This paper treats the analytical and experimental studies on the improvement of commutating circuit for the speed control of DC motor. A simple circuit composed of R, L and C elements is proposed here for switching off power SCR carrying the load current. The real important in this chopper circuit is to determine the reasonable values of commutating circuit constants. In this paper, the reasonable values of the commutating circuit constants are basically determined on a view point of commutating performances in the given circuit model and must satisfy the following conditions. The first, the peak commutating current should be larger than the anticipated maximum load current. The second, the circuit turn-off time (tc) must be longer than the SCR turn-off time (tq). The third, the resistor should be enough large to permit the current to be neglected in the analysis of the commutation circuit, as well as be enough small to permit to charge the capacity voltage (Ec) to the half the value of source voltage (E) before the next communication cycle is initiated. The last, the period of chopping signal must be the least possible multiple of the damping vibration period of commutating circuit. The improved chopper circuit used in the experiment under unloaded condition was composed to meet the reasonable conditions mentioned above, and a successful commuting performance was achieved without failure. Several types of microprocessor having a different value of CPU speed individually have been applied to the experiment under the loaded conditions. Also it shows that the faster the speed of CPU is, the more stable the commutation turns out.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.391-394
• /
• 2006

This paper presents soft switching zero voltage switching high frequency inverter for rare gas fluorescent lamp using dielectric-barrier discharge phenomenon. The simple high-frequency inverter can completely achieve stable zero voltage soft switching (ZVS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZVS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this high frequency Inverter are illustrated as compared with computer simulation results and experimental ones. Its light dimming characteristics due to power regulation scheme are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proven from the practical point of view.