• Journal of information and communication convergence engineering
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2003

This paper discusses the spectral efficiency and performance of asynchronous direct sequency spread spectrum multiple access systems strict bandwidth limitation by Nyquist filtering. The signal to noise plus interference ratio(SNIR) at the output from the correlation receiver is derived analytically taking the cross correlation characteristics of spreading sequences into account, and also an approximated SNIR of a simple form is presented for the systems employing Gold sequences. Based on the analyzed result of SNIR, bit error rate performance and spectral efficiency are also estimated. and at last, we analyzed improvement rate using RS, convolution as a method for improving functions.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.408-414
• /
• 2007

Research advances in the areas of micro-sensor device and wireless network technology, has made it possible to develop energy efficient and low cost wireless sensor nodes. In this paper, the forward error control (FEC) scheme for lower power consumption and excellent BER(Bit Error Rate) performance during transmission propose in multi-hop wireless sensor network based on FSK modem. The FEC technique uses extra processing power related to encoding and decoding, it is need complex functions to be built into the sensor node. The probability of receiving a correct bit and codeword for relaying a frame over h nodes to the sink node is calculated as a function of channel parameter, number of hops, number of bits transmitted and the distance between the different nodes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.5
• /
• pp.171-180
• /
• 2003

CDMA(Code Division Multiple Access) mobile communication systems require accurate channel estimation in the receiver to compensate the fading distortions. Instantaneous channel estimates are obtained by dividing the received symbol by the transmitted symbol and then refined by filtering to reduce the estimation variance. In the channel estimation filter, the determination of the filter size is a very important task which greatly affects the estimation quality. While conventional methods usually use only velocity estimators to determine the channel estimation filter size, this paper proposes a filter size determination method for decision-directed channel estimators considering the symbol error rate and the signal-to-noise ratio in addition to the velocity of the mobile station. This paper shows that the symbol error rate and the signal-to-noise ratio are important factors for the determination of the channel estimation filter size.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.293-297
• /
• 2015

Underwater acoustic communications has been limited use for military purposes in the past. However, the fields of underwater applications expend to detection, submarine and communication in recent. The excessive multipath encountered in underwater acoustic communication channel is creating inter symbol interference, which is limiting factor to achieve a high data rate and bit error rate performance. To improve the performance of a received signal in underwater communication, many researchers have been studied for channel coding scheme with excellent performance at low SNR. In this paper, we applied BCJR decoder based ( 2,1,7 ) convolution codes and to compensate for the distorted data induced by the multipath, we applying the turbo equalization method. Through the underwater experiment on the Gyeungcheun lake located in Mungyeng city, we confirmed that turbo equalization structure of BCJR has better performance than hard decision and soft decision of Viterbi decoding. We also confirmed that the error rate of decoder input is less than error rate of $10^{-1}$, all the data is decoded. We achieved sucess rate of 83% through the experiment.

• Journal of the Korean Statistical Society
• /
• v.35 no.2
• /
• pp.157-166
• /
• 2006

This research proposes an efficient Monte Carlo algorithm for computing error probability in high performance digital communication st stems. It characterizes special features of the problem and suggests an importance sampling algorithm specially designed to handle the problem. It uses a shifted exponential density as the importance sampling density, and shows an adaptive way of choosing the rate and the origin of the shifted exponential density. Instead of equal allocation, an intelligent allocation of the samples is proposed so that more samples are allocated to more important part of the error probability. The algorithm uses the nested feature of the error space and avoids redundancy in estimating the probability. The algorithm is applied to an example data set and shows a great improvement in accuracy of the error probability estimation.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.210-214
• /
• 2019

The allowable path-deviation time of aircraft in a free-space optical communication system has been estimated from various trajectories, using different values of aircraft speeds and turn rates. We assumed the existence of a link between the aircraft and a ground base station. First, the transmitter beam's divergence angle was calculated through two different approaches, one based on a simple optical-link equation, and the other based on an attenuation coefficient. From the calculations, the discrepancy between the two approaches was negligible when the link distance was approximately 110 km, and was under 5% when the link distance ranged from 80 to 140 km. Subsequently, the allowable path-deviation time of the aircraft within the tracking-error tolerance of the system was estimated, using different aircraft speeds, turn rates, and link distances. The results indicated that the allowable path-deviation time was primarily determined by the aircraft's speed and turn rate. For example, the allowable path-deviation time was estimated to be ~3.5 s for an aircraft speed of 166.68 km/h, a turn rate of $90^{\circ}/min$, and a link distance of 100 km. Furthermore, for a constant aircraft speed and turn rate, the path-deviation time was observed to be almost unchanged when the link distance ranged from 80 to 140 km.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.303-310
• /
• 2007

Compressed video bitstreams are intended for real-time transmission over communication networks. Because video compression algorithms eliminate the temporal, spatial, and statistical redundancies, the coded video bitstreams are very sensitive to transmission errors. We propose an error resilient video coding technique to limit the effect of error propagation in low bit-rate video coding. The success of error resilient coding techniques relies on how accurately the transmission errors can be detected. To detect the transmission error, we propose a very simple error detection technique based on data hiding Next, we conceal the corrupted MB data using intra MB refresh and motion compensation with the estimated motion vector and compare the simulation results. This method will be useful in video communication in error Prone environment such as WCDMA networks.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1984.10a
• /
• pp.48-52
• /
• 1984

In this paper, the error rate equation of DS-BP나 spread spectrum signal through satellite communication channel has been derived using MTM and the performances have been evaluated in the presence of uplink and downlink noise.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.226-233
• /
• 2012

In this paper, we propose a 'linear approximation method' which is an accelerated BER (Bit Error Rate) test method for high speed interfaces, based on an analytical BER model. Both the conventional 'Q-factor estimation method' and 'linear approximation method' can predict a timing margin for $10^{-13}$ BER with an error of about 0.03UI. This linear approximation method is implemented on a hardware as an accelerated Built-In Self Test (BIST) with an internal BERT (BET Tester). While a direct measurement of a timing margin in a 3Gbps interface takes about 5.6 hours with $10^{-13}$ BER requirement and 95% confidence level, the accelerated BIST estimates a timing margin within 0.6 second without a considerable loss of accuracy. The test results show that the error between the estimated timing margin and the timing margin from an actual measurement using the internal BERT is less than 0.045UI.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.279-285
• /
• 2011

The next generation wireless communication systems are required high BER performance better than present performance. Double binary Turbo code have error floor at high SNR, so it cannot be used in next generation wireless communication system. Therefore, many methods are proposed for overcome error floor at DVB-RCS NG(next generation). In this paper, we analysis structure of third-dimension Turbo code(3D-turbo code). 3D-Turbo code overcomes error flow by additive post-encoder in conventional DVB-RCS Turbo code. Performance of 3D-Turbo code is changed by post-encoder form, interleaving method, value of ${\lambda}$. So we are simulated by those parameter and proposed optimal form. By a result, performance of 3D-Turbo is better than conventional DVB-RCS Turbo code and it overcome error floor of conventional DVB-RCS Turbo code.