• Current Optics and Photonics
• /
• v.3 no.4
• /
• pp.311-319
• /
• 2019

A hybrid free-space-optical/radio-frequency (FSO/RF) communication system is considered, with the help of amplify-and-forward (AF) relaying. We consider various weather conditions to investigate their effects on the system's performance. We begin by obtaining the cumulative distribution function and probability density function of the end-to-end signal-to-noise ratio for the AF dual-hop FSO communication system with RF backup link. Then, these results are used to derive closed-form expressions for the outage probability, average bit-error rate, and average ergodic capacity. The results show that the considered system efficiently employs the complementary nature of FSO and RF links, resulting in impressive performance improvements compared to non-hybrid systems.

• ETRI Journal
• /
• v.43 no.5
• /
• pp.909-915
• /
• 2021

GaAs on Si grown via metalorganic chemical vapor deposition is demonstrated using various Si substrate thicknesses and three types of dislocation filter layers (DFLs). The bowing was used to measure wafer-scale characteristics. The surface morphology and electron channeling contrast imaging (ECCI) were used to analyze the material quality of GaAs films. Only 3-㎛ bowing was observed using the 725-㎛-thick Si substrate. The bowing shows similar levels among the samples with DFLs, indicating that the Si substrate thickness mostly determines the bowing. According to the surface morphology and ECCI results, the compressive strained indium gallium arsenide/GaAs DFLs show an atomically flat surface with a root mean square value of 1.288 nm and minimum threading dislocation density (TDD) value of 2.4×10⁷ cm^-2. For lattice-matched DFLs, the indium gallium phosphide/GaAs DFLs are more effective in reducing the TDD than aluminum gallium arsenide/GaAs DFLs. Finally, we found that the strained DFLs can block propagate TDD effectively. The strained DFLs on the 725-㎛-thick Si substrate can be used for the large-scale integration of GaAs on Si with less bowing and low TDD.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2020

Fuzzy clustering, represented by FCM(Fuzzy C-Means), is a simple and efficient clustering method. However, the object function in FCM makes clusters affect clustering results proportional to the density of clusters, which can distort clustering results due to density difference between clusters. One method to alleviate this density problem is EDI-FCM(Extended Density-Independent FCM), which adds additional terms to the objective function of FCM to compensate for the density difference. In this paper, proposed is an enhanced EDI-FCM using regularization, Regularized EDI-FCM. Regularization is commonly used to make a solution space smooth and an algorithm noise insensitive. In clustering, regularization can reduce the effect of a high-density cluster on clustering results. The proposed method converges quickly and accurately to real centers when compared with FCM and EDI-FCM, which can be verified with experimental results.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.12 no.1
• /
• pp.159-168
• /
• 1994

The Aggregation State of thin vapor deposite Film made by Cyanine Dye were changed into Monomeric molecular state(M) and Dimeric Aggregation(D) at the acidic treatment, into reversible H-Aggregation (H) at alkalic gas or heat treatment. Photo-electric properties were higher H than D and M, this stats were effective in enhancing Photoelectric-conversion characteristic. Substitute group of Meso-Position being stronger electronic Donors, Electronic density is higher and Electric conductivity is enhanced, we confirmed Oscillator Strength calculated by PPP-Molecular Orbital Calculation and Absorption Spectra at solvent stats were agreed good.

• Proceedings of the KSPS conference
• /
• 2005.04a
• /
• pp.77-80
• /
• 2005

The aim of this paper was to analyze the lexical effects on spoken word recognition of Korean monosyllabic word. The lexical factors chosen in this paper was frequency, density and lexical familiarity of words. Result of the analysis was as follows; frequency was the significant factor to predict spoken word recognition score of monosyllabic word. The other factors were not significant. This result suggest that word frequency should be considered in speech perception test.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.10 no.1
• /
• pp.35-54
• /
• 1992

Direct electrostatic coating method is simple, low cost and environmentally useful method. We are investigated on the coating of carrier transfer polymer layer on the carrier generate inorganic pigment layer using direct electrostatic coating method. The sample was obtained electrostatic deposite layer by fusing and calendering on the copper phthalocyanine. we could be found several polymer thin film shows good bond properties between film and pigment layer.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.335-338
• /
• 2002

For high data rate transmission over wireless fading channels, space-time trellis ceding techniques can be employed to increase the Information capacity of the communication system dramatically. In this paper, we consider the concatenated space time LDPC (Low Density Parity Check) codes. Extra ceding gains In addition to the diversity advantage is shown to be achieved for certain space-time trellis codes transmitted over quasi-static lading channels.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.41-46
• /
• 2011

The tire damage classification method is researched by periodicity detection of ultrasonic envelope signals to occur at the driving vehicle tire. Because periodic signals is generated by rotations of the damaged tire, it should convert to pulse for using the density function. After time intervals of pulses are represented by the density function, the dominant periodicity is detected. The threshold to make a pulse is calculated by moving average of envelope signals. The result of time density function in case of one damage material, the first peak's time is equals to tire's rotation period, 162ms and 102ms, about the speed of 50km/h and 80km/h. In case of more than one damage material, the sum of each peak's time is equals to tire's rotation period about the speed.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.1
• /
• pp.65-75
• /
• 2005

An accurate characterization of the display device is essential for better color matching. The calibration and characterization process in display device is needed to transform the device dependent color to the device independent color. The process of characterization performs a linearization and transforms the linearized values into the CIE XYZ tristimulus values. The purposes of this paper is to propose optimal color transformation method for accurate reproduction of original copy in display device and to explain the propriety of transformation method using specific variable for the power of gradation expression.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.92-100
• /
• 2009

In this paper, we analyze the hardware architecture of Low Density Parity Check (LDPC) decoder using Log Likelihood Ration-Belief Propagation (LLR-BP) decoding algorithm. Various design issues that affect the decoding performance and the hardware complexity are discussed and the tradeoffs between the hardware complexity and the performance are analyzed. The message data for passing error probability is quantized to 7 bits and among them the fractional part is 4 bits. To maintain the decoding performance, the integer and fractional parts for the intrinsic information is 2 bits and 4 bits respectively. We discuss the alternate implementation of $\Psi$(x) function using piecewise linear approximation. Also, we improve the hardware complexity and the decoding time by applying overlapped scheduling.