• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.4
• /
• pp.85-94
• /
• 2015

Recently, research on the smart grid that combines ICT(Information & Communication technology) to the power system has been actively progressed. If the occupancy of the EV(Electric vehicle) is increased. the V2G(Vehicle to grid) system is available which constitutes the micro-grid through battery of EV. V2G system performs load leveling and efficient energy consumption by battery operation considering load condition. But, if the battery is used only depending on the electricity rates, it doses not consider the life of the battery. The ACC(Achievable cycle) and the total transferable energy of battery varies corresponding to the selected DOD(Depth of discharge). In this paper, the optimal DOD selection method of V2G system considering battery wear cost and average driving distance of EV. Also, the total revenue prediction of various nation is presented considering the actual electricity costs per hour.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.89-91
• /
• 2004

In SCADA systems, an RTU is a device installed at a remote location that collects data, codes the data into a format that is transmittable and transmits the data back to a central station, or MTU. An RTU also collects information from the master device and implements processes that are directed by master device. RTUs are equipped with input channels for sensing or metering, output channels for control, indication or alarms and a communications port. In general, the data are transmitted via a wired communication infrastructure such as RS422 or RS485 between RTU and MTU. But, limited range of wired communication doesn't allow the system to cover remote areas over the limitation, and building a wired communication network is not easy in the circumstances. In this Paper, we design and implement a smart cost-effective Web-RTU that can communicate with MTU via Web. Web is of benefit to the Web-RTU, because it is not only free from the distance limitations, but also is built easily and cost-effectively wherever Internet resources are available. Additionally, Web can be easily applied to the SCADA system with the development of hardware and software for communications. The Web-RTU has a program memory, a data memory and a RAM inside, and uses Atmega128, low-cost 8 bit micro-processor with eight AI(Analog Input). It performs well enough to implement all existing roles of RTU.

• Journal of the Korea Society for Simulation
• /
• v.15 no.3
• /
• pp.69-77
• /
• 2006

Geocasting is a form of communication that transmits messages to all nodes within a given geographical region(i.e., the geocasting region). Most of conventional onery aware protocols were based on shortest-hop routing that is, they minimized the cost in terms of the distance and total transmission energy not considering both the residual energy at each node and the link error ratio when selecting the routes for communication. In this paper we propose a MLRG(Maximum Lifetime Reliable Geocast) protocol for energy-efficient and reliable geocasting in Ad-hoc networks. The proposed MLRG, a position-based and routing-based geocasting algorithm, maximizes the network lifetime using newly defined cost function and selecting the energy balanced routes on the basis of each node's residual energy, and provides a reliable communication considering the link error ratio.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.4
• /
• pp.27-36
• /
• 2010

The paper proposes RFB(Record Filtering using Bit-vector) join algorithm, an in-network strategy that uses bit-vector to drastically reduce the size of data and hence the communication cost. In addition, by eliminating data not involved in join result prior to actual join, communication cost can be minimized since not all data need to be moved to the join nodes. The simulation result shows that the proposed RFB algorithm significantly reduces the number of bytes to be moved to join nodes compared to the popular synopsis join(SNJ) algorithm.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.107-122
• /
• 2008

Communication is be classified into public network and private network. VPN is made by integrating the circuit cost reduction of public network and the reliable security support of public network. This paper analyzes the IPSec using three layer tunneling, MPLS(Multi Protocol Label Switching) integrating 2 layer switching and 3 layer routing techniques and dedicated line from the viewpoint of security. In conclusion, VPN is better than dedicated network line in cost and security. If IPSec VPN is compared with MPLS VPN, MPLS VPN is more excellent than IPSec VPN in safe data transmission, cost, QoS and management.

• Current Photovoltaic Research
• /
• v.6 no.4
• /
• pp.124-132
• /
• 2018

The Korean electric power supply plan was prepared by greatly enhancing the environmental and safety with considering the economical efficiency of the electric equipment, the impact on the environment and the public safety. As a result, the fossil energy-based power generation sector is accelerating the paradigm shift to eco-friendly energy such as solar power and wind. Also the solar power industry is expected to grow into a super large-sized industry by converging the energy storage and electric vehicle industry. Generally, a levelized cost of electricity (LCOE) is used to calculate the power generation cost for different generation power generation efficiency, operating cost, and life span. In this paper, we have studied the future research and development direction of photovoltaic technology development for the era of massive utilization of photovoltaic solar power, and have studied the LCOE of major countries including China, USA, Germany, Japan and Korea. Finally we have reviewed USA and Japan research programs to reduce the LCOE.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.5
• /
• pp.1223-1237
• /
• 2024

Autonomous vehicles use onboard sensors to sense the surrounding environment. In complex autonomous driving scenarios, the detection and recognition capabilities are constrained, which may result in serious accidents. An efficient way to enhance the detection and recognition capabilities is establishing collaborations with the neighbor vehicles. However, the collaborations introduce additional challenges in terms of the data heterogeneity, communication cost, and data privacy. In this paper, a novel personalized federated learning framework is proposed for addressing the challenges and enabling efficient collaborations in autonomous driving environment. For obtaining a global model, vehicles perform local training and transmit logits to a central unit instead of the entire model, and thus the communication cost is minimized, and the data privacy is protected. Then, the inference similarity is derived for capturing the characteristics of data heterogeneity. The vehicles are divided into clusters based on the inference similarity and a weighted aggregation is performed within a cluster. Finally, the vehicles download the corresponding aggregated global model and train a personalized model which is personalized for the cluster that has similar data distribution, so that accuracy is not affected by heterogeneous data. Experimental results demonstrate significant advantages of our proposed method in improving the efficiency of collaborative perception and reducing communication cost.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.6
• /
• pp.554-560
• /
• 2019

In this study, after applying the finite failure NHPP Rayleigh distribution model and NHPP Inverse Rayleigh distribution model which are widely used in the field of software reliability to the software development cost model, the attributes of development cost and optimal release time were compared and analyzed. To analyze the attributes of software development cost, software failure time data was used, parametric estimation was applied to the maximum likelihood estimation method, and nonlinear equations were calculated using the bisection method. As a result, it was confirmed that Rayleigh model is relatively superior to Inverse Rayleigh model because software development cost is relatively low and software release time is also fast. Through this study, the development cost attributes of the Rayleigh model and the Inverse Rayleigh model without the existing research examples were newly analyzed. In addition, we expect that software developers will be able to use this study as a basic guideline for exploring software reliability improvement method and development cost attributes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.11
• /
• pp.1233-1240
• /
• 2014

For the last three decades after the advent of the Toffoli gate in 1980, while many reversible circuit syntheses have been presented reversible embedding methods onto suitable reversible functions, only a few proposed direct irreversible-to-reversible mapping methods without reversible embedding. In this paper we present two effective policies to reduce the gate cost and complexity for the existing direct reversible mapping methods without reversible embedding. In order to develop new cost reduction policies we consider the cost influence of Toffoli module according to NOT gate arrangement in classical circuits. From this we deduced an inverse proportional property between inverting input numbers of classical AND/OR gates and reversible Toffoli module cost based on a fact - the inverting inputs of classical AND(OR) gates increase(decrease) the Toffoli module cost. We confirm the applications of the inverting input rearrangement and maximum fan-out policies preceding direct reversible mapping will be effective method to improve the reversible Toffoli module cost and complexity with the parallel using of the fan-out and supercell ones.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.362-367
• /
• 2005

Control network adopted in the national power-plant or manufactory are mostly vendor-dependent products, which have their own special specification, components and individual communication methods. These systems not only raise installation cost, but also bring many difficulties to maintenance and extension. To overcome these problems, this paper introduces a development and application case of a new "PC/Ethernet-based fieldbus" architecture and protocol to be used in mid-level fieldbus. The designed system has a basic idea of "3 Layers fieldbus over Standard-LAN" and implemented on PCs. PC gives user friendly environment. By using an open standard Ethernet in layer 1,2, the system has low cost, wide communication bandwidth and high compatibility. Layer 3 protocol designed for large realtime data communication makes user bypass TCP/IP layer and gives user direct access to the Ethernet. This new protocol eliminates potential collision of Ethernet, and transmits large periodic/non-periodic control data by using long-frame/wide-bandwidth of Ethernet effectively, and offers simple API-Services to the upper layer. Since the system have installed in H-power plant simulator and U-nuclear power plant simulator in Korea, it have been proved to be efficient and stable without any trouble in realtime communication service for full-scope plant simulator that has a lot of control elements.