• 한국연소학회지
• /
• 제16권4호
• /
• pp.1-7
• /
• 2011

The purpose of this study was to analyze the effect of pilot injection strategy on the combustion and emissions characteristics in a four cylinder common-rail direct injection diesel engine fueled with biodiesel(soybean oil) blend. The tested fuel was mixed of 20% biodiesel and 80% ULSD(Ultra low sulfur diesel) by volume ratio. The experiments were performed under two load conditions, and results were compared with those of single injection. The experimental results showed that the ignition delay of BD20 was shorter than compared to that of ULSD in the case of low load condition. Also, the fuel consumption of BD20 was more higher than that of ULSD. Fuel consumption by applied pilot injection strategy were generally decreased compared with that of single injection. In the case of pilot injection, the exhaust emissions such as CO and HC emissions were decreased compared to the single injection.

• 복식문화연구
• /
• 제9권6호
• /
• pp.855-871
• /
• 2001

The purposes of this study were to compare the marketing compose elements of Apgujung and Shinchon branch of Hyundai Department Store and to suggest desirable fashion marketing strategies for other Department Stores and retailing stores. The results were as follows: Two kinds of factor were classified form this study; one was Hardware elements such as Trading Area Site, Store Composition, Scale, and Subsidiary facilities etc., another was Software elements like Store Concept, Image, and Merchandising and so on. The followings were suggested from Hardware elements; 1) Trading Area could be classified'local type'and 'spread type'. 2) Each branch was differentiated from store formation of conventional department store which had food department in basement. There were the most powerful women's fashion brand to lead costumers in second basement. 3) In accordance with the position of subsidiary facilities of Hyundai Department Store,'Water Jet Effect'strategy and'Show Effect'strategy could be usefully applied for other Department Stores and retailing stores. 4) The strategy of approaching easily to the target floor which was located in lower floor, could be applied to various retailing stores. The followings were suggested from Software elements; 1) Stores management coping with poles-apart in costumer could be needed to other Department Store and retailing stores. 2) It also could be needed to find and maintain effective ratio between common brand and differentiated brands in the other Department Stores.

• Clinical and Experimental Pediatrics
• /
• 제63권1호
• /
• pp.8-13
• /
• 2020

Autism spectrum disorder is a common neurodevelopmental disorder with an unknown etiology. The correlation between neonatal jaundice and the risk of developing autism spectrum disorder was investigated previously. Some studies showed significant associations, whereas others demonstrated no association. In this meta-analysis, we pooled the results of observational studies to examine the association between neonatal jaundice and the risk of autism spectrum disorder among children. We identified all studies published through April 2018 by conducting a literature search using Web of Science, PubMed, and Scopus databases as well as the reference lists of the retrieved studies. The pooled odds ratios (ORs), rate ratio (RR), and their 95% confidence intervals (CIs) were calculated as random effect estimates of association among studies. We conducted a subgroup analysis to explore any potential sources of intergroup heterogeneity. The pooled estimates of OR and RR showed a considerable correlation between neonatal jaundice and ASD among children (OR, 1.35; 95% CI, 1.02-1.68) and (RR, 1.39; 95% CI, 1.05-1.74). A larger effect size was shown in the pooled estimated crude OR than in the adjusted OR (1.75 [0.96-2.54] vs. 1.19 [1.07-1.30]). This study showed that neonatal jaundice may be associated with ASD and may increase the risk of ASD among children.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.71-79
• /
• 2021

This study investigates the capital structure policy among Indonesian public companies. Previous studies suggest that capital structure policy could follow either static or dynamic behavior. The sample data used in this study was companies in the manufacturing sector, divided into three sub-sectors: the basic and chemical industry, miscellaneous industry, and the consumer goods industry. This study uses panel data from 2010 to 2018, with the Generalized Least Square (GLS) method and compared whether the fixed effect model is better than the common effect model. The results show that the dynamic and non-linear model tests can explain the capital structure determinants than the static and linear models. The dynamic model shows that the capital structure of a certain year is influenced by the capital structure of the previous year. The findings indicate that the company performs some adjustments in its capital structure policy by referring to the previous debt ratio, which implies support to the trade-off theory (TOT). The study also shows that profitability, tangible assets, size, and age explain the variation of capital structure policy. The patterns on the dynamic and non-linear confirm that capital structure runs in a nonlinear pattern, based on the sector, company condition, and the dynamic environment.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.46-47
• /
• 2013

This study investigates the effect of a grading of aggregate on the properties of concrete. It is a common sense in Korea that the production of coarse aggregate in ready mixed concrete industry excludes particular aggregate size ranged from 5 mm to 13 mm for saving the production cost. This causes a gap grading of the aggregate for concrete, which can lead to the increase of unit water, the development of drying shrinkage-induced crack and the reduction of compressive strength. In this study, conventional aggregate obtained from a ready mixed concrete factory and the aggregate with a modified grading produced in lab. condition were prepared. Results showed that a good grading of aggregate (i.e., the ratio of 5~13 mm and 13~25 mm is 6 to 4) produced in the lab. condition significantly improved the slump and the compressive strength of the concrete.

• 한방안이비인후피부과학회지
• /
• 제12권1호
• /
• pp.396-407
• /
• 1999

Although tinnitus is a common disease, it's reason, pathogenesis and treatment are not examined clearly. As tinnitus is a subjective complaint, it is not easy to evaluate objectively and to compare with another. In this study, we intend to estimate the effect of a variety of oriental medical treatments to tinnitus. We inquired about 30cases of tinnitus patients visited the Kwang-ju Oriental Medical Hospital of Wonkwang University from Apr. 1998 to Sep. 1998. We examined the 30cases in the view of sex, age, occupation, duration, etiologic factors, past history, associating symptoms, quality of tinnitus, and recovery rate after treatments. The results were as follows: 1. In distribution of sex, the ratio of male was $63.3\%$(19cases)and\;female\;was\;36.6\%$(11cases). 2. In distribution of age, the ratio of the 2th decade was $6.6\%(2cases),\;the\;3th\;decade\;was\;20.0\%(6cases),\;the\;4th\;decade\;was\;16.6\%(5cases),\;the\;5th\;decade\;was\;23.3\%(7cases),\;the\;6th\;decade\;was\;30.0\%\;(9cases),and\;the\;7th\;decade\;was\;3.3\%(1case)$. 3. In distribution of occupation, the ratio of employee was $23.3\%$(7cases), house-keeper was $63.3\%(11cases),\;farmer\;was\;16.6\%(5cases),\;teacher\;was\;13.3\%$ (4cases), and student, merchant, soldier was each $3.3\%$(1case). 4. In distribution of duration, the ratio of under 1month was $6.6\%$ (2cases), 1 month -6 months was $20.0\%$(6cases), 6 months- 12months was $30.0\%$(9cases), 12months-36months was $23.3\%$(7cases), and over 36months was $20.0\%$(6cases). 5. In etiologic factor of tinnitus, the ratio of unknown reason was $40.0\%$ (12cases), overwork was $16.6\%$(5cases), emotional stress was $10.0\%$(3cases), noise was $6.6\%$(2cases), cases of laying overwork upon stress was $13.3\%$(4cases), head trauma was $3.3\%$(1case), gun report was $3.3\%$ (1case), and after sickness was $6.6\%$(2cases). 6. 9 cases had experienced such a disease as meniere's disease, tympanitis, labyrinthitis, trauma of tympanum, hypertension, etc. 7. Commonly associated symptoms were dizziness, deafness, uneasiness, headache, ear fullness, fatigue, insomnia, nausea, vomiting, and forgetfulness. 8. Most frequent quality of tinnitus were buzzing, whistling, humming etc. 9. In $76.6\%$(23cases) of tinnitus patients, it was improved, but in $23.3%$(7cases) of them, not improved. Total recovery rate was $42.2\%$.

• 한국주조공학회지
• /
• 제33권3호
• /
• pp.103-112
• /
• 2013

Effect of Fe and Mn contents on the tensile properties of Al-4 wt%Mg-0.9 wt%Si alloy system has been studied. Common phases of Al-4 wt%Mg-0.9 wt%Si alloy system were ${\alpha}$-Al, $Mg_2Si$, ${\alpha}-Al_{12}(Fe,Mn)_3Si$ and ${\beta}-Al_5FeSi$. As Fe content of Al-4 wt%Mg-0.9 wt%Si alloy system increased from 0.15 wt% to above 0.3 wt%, ${\beta}-Al_5FeSi$ compound appeared. When Mn content of the alloy increased from 0.3 wt% to 0.5 wt%, morphology of plate shaped ${\beta}-Al_5FeSi$ compound changed to chinese script ${\alpha}-Al_{12}(Fe,Mn)_3Si$. As Fe content of Al-4 wt%Mg-0.9 wt%Si-0.3 wt%Mn alloy increased from 0.15 wt% to 0.4 wt%, tensile strength of the as-cast alloy decreased from 191 MPa to 183 MPa and, elongation of the alloy also decreased from 8.0% to 6.2%. Decrease of these properties can be explained as the formation of plate shape, ${\beta}-Al_5FeSi$ phase with low Mn/Fe ratio of the alloy. However, when Mn content of Al-4 wt%Mg-0.9 wt%Si-0.3 wt%Fe alloy increased from 0.3 wt% to 0.5 wt%, tensile strength of as-cast alloy increased from 181 MPa to 194 MPa and, elongation of the alloy increased from 6.8% to 7.0%. These improvements attribute to the morphology change from ${\beta}-Al_5FeSi$ phase to chinese script, ${\alpha}-Al_{15}(Fe,Mn)_3Si_2$ phase shape-modified from with high Mn/Fe ratio of the alloy.

• Nutrition Research and Practice
• /
• 제10권6호
• /
• pp.583-589
• /
• 2016

BACKDROUND/OBJECTIVE: Constipation is a condition that can result from intestinal deformation. Because humans have an upright posture, the effects of gravity can cause this shape deformation. Oligosaccharides are common prebiotics and their effects on bowel health are well known. However, studies of the physiological functionality of a product that contains both lactulose and galactooligosaccharides are insufficient. We investigated the constipation reduction effect of a dual-type oligosaccharide, Dual-Oligo, in loperamide-treated rats. MATERIALS/METHODS: Dual-Oligo consists of galactooligosaccharides (15.80%) and lactulose (51.67%). Animals were randomly divided into four groups, the normal group (normal), control group (control), low concentration of Dual-Oligo (LDO) group, and high concentration of Dual-Oligo (HDO) group. After 7 days of oral administration, fecal pellet amount, fecal weight, watercontent of fecal were measured. Blood chemistry, short-chain fatty acid (SCFA), gastrointestinal transit ratio and length and intestinal mucosa were analyzed. RESULTS: Dual-Oligo increased the fecal weight, and water content of feces in rats with loperamide-induced constipation. Gastrointestinal transit ratio and length and area of intestinal mucosa significantly increased after treatment with Dual-Oligoin loperamide-induced rats. A high concentration of Dual-Oligo tended to produce more acetic acid than that observed for the control group, and Dual-Oligo affected the production of total SCFA. Bifidobacteria concentration of cecal contents in the high-concentration oligosaccharide (HDO) and low-concentration oligosaccharide (LDO) groups was similar to the result of the normal group. CONCLUSIONS: These results showed that Dual-Oligo is a functional material that is derived from a natural food product and is effective in ameliorating constipation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권6호
• /
• pp.798-803
• /
• 2018

Objective: The objective of this study was to estimate the genetic parameters for milk ${\beta}$-hydroxybutyrate (BHBA), acetone (Ac), fat protein ratio (FPR), and energy balance (EB) using milk test day records and investigate the effect of early lactation FPR and EB on milk ketone body concentrations. Methods: Total 262,940 test-day records collected from Korea Animal Improvement Association during the period of 2012 to 2016 were used in this study. BHBA and Ac concentrations in milk were measured by Fourier transform infrared spectroscopy (FTIR). FPR values were obtained using test day records of fat and protein percentage. EB was calculated using previously developed equation based on parity, lactation week, and milk composition data. Genetic parameters were estimated by restricted maximum likelihood procedure based on repeatability model using Wombat program. Results: Elevated milk BHBA and Ac concentrations were observed during the early lactation under the negative energy balance. Milk FPR tends to decrease with the decreasing ketone body concentrations. Heritability estimates for milk BHBA, Ac, EB, and FPR ranged from 0.09 to 0.14, 0.23 to 0.31, 0.19 to 0.52, and 0.16 to 0.42 respectively at parity 1, 2, 3, and 4. The overall heritability for BHBA, Ac, EB and FPR were 0.29, 0.32, 0.58, and 0.38 respectively. A common pattern was observed in heritability of EB and FPR along with parities. Conclusion: FPR and EB can be suggested as potential predictors for risk of hyperketonemia. The heritability estimates of milk BHBA, Ac, EB, and FPR indicate that the selective breeding may contribute to maintaining the milk ketone bodies at optimum level during early lactation.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.478-486
• /
• 2005

Statement of problem : Fracture and dimensional change of an acrylic resin denture are a rather common occurrence. Purpose : The purpose of this study was to compare differences in dimensional changes and flexural strength of separate maxillary complete dentures after immediate deflasking by injection molding and conventional compression processing. Material and method: To evaluate dimensional stability, the maxillary dentures were fabricated by using different materials and methods. Lucitone 199(Dentsply Trubyte. york, pennsylvania, USA) and Vertex(Dentimex, zeist, Netherlands) were used as materials. Compression and injection packing methods were used as processing methods. The impression surface of the dentures was measured by 3D Scann-ing System(PERCEPTRON USA) and overlapped original impression surface of the master cast. To evaluate flexural strength, resin specimens were made according to the different materials, powder/liquid ratio and processing methods. Flexural strength of the complete resin specimens (64mm$\times$10mm$\times$3.3mm) were measured by INSTRON 4467. (INSTRON, England) The data was analyzed by ANOVA, t-test and Tukey test. (p<.05 level of significance) Result: The results were as follows 1. There was no significant differences between master model and denture base for each group in overall dimensional changes. 2. Palatal area was more stable than flange or alveolar area in dimensional stability. but. there was no significant differences among each area. 3. Materials and power/liquid ratio had an effect on flexural strength. (P<.05) Especially materials was most effective. (P<.05) 4. Lucitone 199(powder/liquid ratio followed by manufacturer's direction) showed higher flexural strength than Vertex. Conclusion : Dimensional stability or flexural strength are affected by materials rather than packing techniques.