• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.56-62
• /
• 2003

Spray characteristics of conventional diesel fuel and bio-diesel fuel(methyl-ester of soybean oil) were compared, in terms of spray tip penetration and spray angle, by using a commercial high pressure common rail injection system for light-duty DI Diesel engines. The experiments were carried out under the non-evaporating condition at ambient density(8.8, $15.6 kg/\textrm{m}^3$) and injection pressure(75, 135 MPa). The experimental method was based on a laser sheet scattering technique. Spray tip penetrations of bio-diesel fuel were longer, on the whole, than those of conventional diesel fuel, except for lower injection pressure(75 MPa) under lower ambient density$(8.8 kg/\textrm{m}^3)$. But spray near angle and spray far angle of bio-diesel fuel were smaller than those of conventional diesel fuel, implying spray angle is related to the growth rate of spray tip penetration. The experimental results of spray tip penetration agreed well with the calculated values by the Wakuri et al.'s correlation based on the momentum theory.

• Journal of ILASS-Korea
• /
• v.18 no.1
• /
• pp.55-60
• /
• 2013

In this study, injection flow rates and material of the solenoid sealing of the injectors were improved for the development of a di-methyl Ether(DME) common-rail system. To deliver the same amount of energy provided by injection pressure of diesel $P_{inj}$ = 160 MPa, the DME injectors need to have larger diameter of nozzle hole and more No. of hole at low injection pressure of $P_{inj}$ = 40~50 MPa. The simplified nozzle flow model, which takes account of nozzle geometry and injection condition, was employed in order to design the concept of a injector nozzle such as No. of hole, diameter of hole and diameter of needle seat, etc. Injection amount and rate were tested by diesel and DME test stand. As a result, the diameter of nozzle hole were enlarged by 0.25 mm. The diameter of the orifice in the high pressure line was increased by 1.0 mm to maintain hydraulic force in the nozzle. The material of the solenoid sealing was changed to HNBR, which was strong against the corrosive. Experimental results showed that the injection amount of the DME injector drastically increased by 191.9% comparison to that of diesel at $P_{inj}$ = 40 MPa.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.16-22
• /
• 2004

Dimethyl Ether (DME) has been considered as one of the most attractive alternative fuels for a compression ignition engine. The major advantage of DME-fuelled engine is a great potential for soot-free combustion without sacrificing an inherent high thermal efficiency of diesel engine, despite a necessity for modification of the conventional fuel injection system. An experimental study on DME and conventional diesel sprays was conducted by employing a common-rail type fuel injection system with a 5-holes sac type nozzle, including a constant volume vessel pressurized with nitrogen gas. The injection rates of DME and diesel fuel were recorded with the Bosch type injection rate meter. The injection delay of DME was shorter than that of diesel fuel. The measured injection rates of DME and diesel fuel were correlated with spray penetrations. The prediction method of spray penetration was established using the injection rates, which was verified with the Dent's penetration model and found to agree well for DME case.

• Journal of ILASS-Korea
• /
• v.17 no.3
• /
• pp.140-145
• /
• 2012

Recent common-rail injector of a diesel engine needs more smaller nozzle hole to meet the stringent emission regulation. But, small nozzle hole diameter can cause nozzle coking which is occurred due to the deposits of post-combustion products. Nozzle coking has a negative effect on the performance of fuel injector because it obstructs the fuel flow inside a nozzle hole. In this study DFSS (Design for six sigma) method was applied to find the effect of nozzle design parameter on nozzle coking. Total 9 injector samples were chosen and tested at diesel engine. The results show that nozzle hole diameter and K-factor have more effect on nozzle coking than A-mass and hole length. Large hole diameter and A-mass, small hole length and K-factor give more positive performance on nozzle coking in these experimental conditions. But, a performance about nozzle coking and exhaust gas emission shows the opposite tendency. Further study is needed to find the relation between nozzle coking and emission characteristic for the optimization of injector nozzle design.

• Journal of ILASS-Korea
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2012

This study described the effect of the multiple injections and diesel-ethanol on the NVH, combustion and emission characteristics of 4 cylinder common rail diesel engine. In order to investigate the influence of diesel-ethanol blended fuel in a light-duty common rail diesel engine, the injection strategy was varied with pilot injection, double pilot injections, and one main injection at various operating conditions. The results showed that diesel-ethanol blended fuel had longer ignition delay than that of the ultra low diesel fuel(ULSD). Also, in the case of multiple injections, the combustion pressure is increased smoothly near the TDC and the NVH are decreased. In the emission characteristics, diesel-ethanol blended fuel produced lower indicated specific nitrogen oxides(IS-NOX) and indicated specific Soot(IS-soot) emissions, however, indicated specific unburned hydrocarbon(IS-HC) and indicated specific carbon monoxide(IS-CO) emissions are slightly increased.

• Culinary science and hospitality research
• /
• v.23 no.6
• /
• pp.27-35
• /
• 2017

The purpose of this study was to examine the causal relationship among restaurant selection attributes and customer satisfaction and recommendation tastes for young people in their twenties who use tickets for Rail-ro. Data collection was conducted to utilize questionnaire survey with online and offline distribution. The collected data were analyzed using a statistical program SPSS 21.0 with frequency analysis, reliability analysis, factor analysis, and regression analysis. The results of the study showed that Internet search is the most common source of information about restaurants during the trip, and restaurant choice attributes have an important impact on customer satisfaction, food quality, employee service and reputation, but hygiene did not have a big effect on customer satisfaction. In addition, customer satisfaction has a significant effect on recommendation intention. Concluding the results from this study, it investigated the significant attributes for customers selection of restaurants and provide meaningful advice for market managers to make useful marketing strategies to attract more clients and augment economic benefits.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.85-93
• /
• 2007

This paper presents new LVDS I/O circuits with a high noise margin for use in highly parallel I/O environments. The proposed LVDS I/O includes transmitter and receiver parts. The transmitter circuits consist of a differential phase splitter and a output stage with common mode feedback(CMFB). The differential phase splitter generates a pair of differential signals which have a balanced duty cycle and $180^{\circ}$ phase difference over a wide supply voltage variation due to SSO(simultaneous switching output) noises. The CMFB output stage produces the required constant output current and maintains the required VCM(common mode voltage) within ${\pm}$0.1V tolerance without external circuits in a SSO environment. The proposed receiver circuits in this paper utilizes a three-stage structure(single-ended differential amp., common source amp., output stage) to accurately receive high-speed signals. The receiver part employs a very wide common mode input range differential amplifier(VCDA). As a result, the receiver improves the immunities for the common mode noise and for the supply voltage difference, represented by Vgdp, between the transmitter and receiver sides. Also, the receiver produces a rail-to-rail, full swing output voltage with a balanced duty cycle(50% ${\pm}$ 3%) without external circuits in a SSO environment, which enables correct data recovery. The proposed LVDS I/O circuits have been designed and simulated with 0.18um TSMC library using H-SPICE.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1266-1273
• /
• 2004

Urban railway signaling system is for train operation with safety in the urban crowded area, that has been increasing the demand of use of advanced train control systems with safe. European Commission is supporting the UGTMS(Urban Guided Transport Management System) project for the research and development. The main objective of UGTMS is to provide the European urban guided transport sector (comprising metro, tram and light rail systems) with a common Management System. A key topic is the extent to which the specifications for the successful ERTMS(European Rail Transport Management System) can be adapted to UGTMS needs. Beyond this, it is necessary to define the relevant functional and system requirements for all types of urban guided transport management systems in order to improve interoperability and intermodality. Also to be explored are the prospects for open system standards. In this article, we look into the trend of the standardization through the UGTMS project in Europe and consider any benefit to the project of the standardization for the urban railway signaling system in Korea.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.711-716
• /
• 2006

A set of design factors that should be considered during rail transit system development in proposed. As the current trend in the rail transit development emphasizes its role as a medium through which the interaction between the city environment and people takes place, the factors of harmony, color, characteristics, identity, and communication should be considered in the railway-transit system design. It's important to ensure that there exist harmony between the design and the civic environment, the influence of color on people is properly considered, the car design possesses distinct characteristics, and that the sense of common identity as well as effective communication is fostered between the system and people it serves. Several cases from various countries are presented to illustrate the points raised in the paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.435-435
• /
• 2000

Light Rail Transit (LRT) system is a complex and large system in which there are many subsystems, interfaces, functions and demanding performance requirements. Because many contractors participate in the development, it is necessary to apply methods of sharing common objectives and communicating effectively among all of the stakeholders. This paper shows not only the methodology and the results of computer-aided systems engineering including requirement management, functional analysis and architecting LRT system, but also propose a tool to help manage a project by linking WBS (Work Breakdown Structure), work organization and PBS (Product Breakdown Structure). The application of computer-aided tool RDD-100 provides the capability to model product design knowledge and decisions about important issues such as architecting the top-level system. The product design knowledge will be essential in integrating the following life-cycle phase activities over the life of the LRT system. Additionally, when a new generation train system is required, the reuse of the database can increase the system design productivity and effectiveness significantly.