• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1820-1822
• /
• 2001

광파이버 패브리페로 간섭계에서 동작영역을 넓히기 위해 공진기의 길이를 1mm보다 짧은 초소형 간섭계를 구성하고자 하였을 경우, 광출력의 위상변화에 대한 감도가 낮아 전달함수로부터 변화된 위상을 복원하는 과정이 까다로워진다. 이러한 신호복원 과정에는 대부분 신호잡음비를 높여주는 신호처리 수단을 포함하게 되므로 간섭계가 겪은 위상변화를 보다 높은 신뢰성으로 검출하고자 할 때 어떠한 신호처리 방법이 적절한가하는 선택의 문제가 발생된다. 이는 각각의 신호처리방법이 장단점을 가지므로 응용목적에 따른 trade-off가 필요하기 때문이다. 본 연구에서는 참조 간섭계와 센서 간섭계 간의 correlation으로부터 위상을 검출하여 시스템의 잡음을 common mode 잡음으로 처리할 수 있었으며, 디지털 신호처리기법을 응용하여 짧은 공진기로 구성된 센서 간섭계의 위상변화분을 보다 안정적으로 검출하게 되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.815-818
• /
• 2003

New sensing and writing schemes for a magneto-resistive random access memory (MRAM) with a twin cell structure are proposed. In order to enhance the cell reliability, a scheme of the low voltage precharge is employed to keep the magneto resistance (MR) ratio constant. Moreover, a common gate amplifier is utilized to provide sufficient voltage signal to the bit line sense amplifiers under the small MR ratio structures. To enhance the writing reliability, a current mode technique with tri-state current drivers is adopted. During write operations, the bit and /bit lines are connected. And 'HIGH' or 'LOW' data is determined in terms of the current direction flowing through the MTJ cell. With the viewpoint of the improved reliability of the cell behavior and sensing margin, HSPICE simulations proved the validity of the proposed schemes.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.75-78
• /
• 2000

Since the most of malfunctions in the industrial equipment controlled by processors is occured by the Electrical Fast Transient(EFT), the International Electrotechnical Commission(IEC) prepared the dummy signal to test the immunity level of the equipments. In this paper. we designed a new EMC filter for power line in break-box, which is consist of the feed-through capacitor and ferrite materials with high permeability which was wound or inserted in the second layer of the power cable in order to increase common mode inductance. We have obtained a excellent insertion loss characteristics over wide frequency band from 100 KHz up to 6 GHz. It is expected that the new EMC filter could be effectively used for industrial, MIL, and medical equipments to reduce a malfunctions and be suitable for IEC 61000-4-4.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.867-872
• /
• 2005

This paper describes the measurement and location method of partial discharges in high voltage CV cables. Coupling capacitors were used to detect partial discharge signal. Impedance characteristic of the coupling circuit and an amplifier with a high Common Mode Rejection Ratio(CMRR) were studied to improve sensitivity of the circuit. From the calibration experiment, the sensitivity of the partial discharge detection circuit was about 100pC. Also, we confirmed that the location of partial discharges in cables can be estimated by calculation of time difference between the first pulse and the second one reflected from the other end of the cable.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.100-104
• /
• 2001

Since the most of malfunctions in the industrial equipment controlled by processors is consist of the electrical fast transient (EFT)$^{[1],[2]}$TEX>, the International Electrotechnical Commission (IEC) prepared the dummy signal to test the immunity level of the equipments. To work out a countermeasure for the malfunction, We designed a new electromagnetic compatibility (EMC) filter for high power supply, which is consisted of a feed-through capacitor and ferrite materials with high permeability. The ferrite material is surrounded with a power cable or is inserted on the cable’s second layer in order to increase common-mode inductance. We have obtained a excellent insertion loss characteristics over the frequency band from 150 kHz to 30 MHz. The developed new EMC filter satisfy IEC 61000-4-4 and is suitable for industrial, militaly, and medical equipments with reduced malfuntions.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권4호
• /
• pp.163-171
• /
• 2006

This paper presents a definition of sync phenomenon occurring in power systems, and describes the characteristics of sync in basic electric circuits. In addition, sync observed in basic circuits was extended to the analysis of dynamic characteristics in power systems. This paper, moreover, describes the sync occurring among system outputs from time domain simulation for two-area systems. In power systems, sync is a common phenomenon that is always observed among generator powers or bus voltages. Thus, we can use sync to obtain the characteristics of power systems without being bound to a specific operating point. Sync can be useful information in power system operation and planning.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2070-2078
• /
• 2014

In this work, the frequency response of gate-all-around (GAA) Ge/GaAs heterojunction tunneling field-effect transistor (TFET) with hetero-gate-dielectric (HGD) and pnpn channel doping profile has been analysed by technology computer-aided design (TCAD) device-circuit mixed-mode simulations, with comparison studies among ppn, pnpn, and HGD pnpn TFET devices. By recursive tracing of voltage transfer curves (VTCs) of a common-source (CS) amplifier based on the HGD pnpn TFET, the operation point (Q-point) was obtained at $V_{DS}=1V$, where the maximum available output swing was acquired without waveform distortion. The slope of VTC of the amplifier was 9.21 V/V (19.4 dB), which mainly resulted from the ponderable direct-current (DC) characteristics of HGD pnpn TFET. Along with the DC performances, frequency response with a small-signal voltage of 10 mV has been closely investigated in terms of voltage gain ($A_v$), unit-gain frequency ($f_{unity}$), and cut-off frequency ($f_T$). The Ge/GaAs HGD pnpn TFET demonstrated $A_v=19.4dB$, $f_{unity}=10THz$, $f_T=0.487$ THz and $f_{max}=18THz$.

• 한국항해항만학회지
• /
• 제26권5호
• /
• pp.525-528
• /
• 2002

제안된 EMC 필터는 높은 투자율의 페라이트 비드와 관통형 콘덴서로 구성하여 제작하였고, 10 MHz ~ 1.5 GHz에서 전원선에서 광대역 노이즈 신호에 대한 EMC 요구를 만족시킨다. 최적의 필터를 설계하기 위하여 페라이트 비드의 임피던스를 계산하여 찾았다. 그 결과, 광대역 EMC 필터는 차동모드 노이즈와 공통모드 노이즈에 대해 10 MHz ~ 1.5 GHz대역에서 30 dB 이상의 필터 특성을제안된 EMC 필터는 높은 투자율의 페라이트 비드와 관통형 콘덴서로 구성하여 제작하였고, 10 MHz ~ 1.5 GHz에서 전원선에서 광대역 노이즈 신호에 대한 EMC 요구를 만족시킨다. 최적의 필터를 설계하기 위하여 페라이트 비드의 임피던스를 계산하여 찾았다. 그 결과, 광대역 EMC 필터는 차동모드 노이즈와 공통모드 노이즈에 대해 10 MHz ~ 1.5 GHz대역에서 30 dB 이상의 필터 특성을 나타내었다. 그리고, DC ~ 1.8 GHz 주파수 대역에서 10 ~ 30 dB이상의 내성 특성을 향상시켰다. 나타내었다. 그리고, DC ~ 1.8 GHz 주파수 대역에서 10 ~ 30 dB이상의 내성 특성을 향상시켰다.

• 대한의용생체공학회:의공학회지
• /
• 제32권1호
• /
• pp.45-54
• /
• 2011

Cuff electrodes have a benefit for chronic electroneurogram(ENG) recording while minimizing nerve damage. However, the ENG signals are usually contaminated by electromyogram(EMG) activity from the surrounding muscle, the thermal noise generated within the source resistance, and the electric noise generated primarily at the first stage of the amplifier. This paper proposes a new cuff electrode to reduce the interference of EMG signals. An additional middle electrode was placed at the center of cuff electrode. As a result, the proposed cuff electrode achieved a higher signal-to-interference ratio compared to the conventional tripolar cuff. The cuff electrode was then assembled together with closure, headstage, and hermetic case including electronic circuits. This paper also presents a lownoise amplifier system to improve signal-to-noise ratio. The circuit was designed based on the noise analysis to minimize the electronic noise. The result shows that the total noise of the amplifier was below $1{\mu}V_{rms}$ for a cuff impedance of $1\;k{\Omega}$ and the common-mode rejection ratio was 115 dB at 1 kHz. In the current study, the performance of nerve cuff electrode system was evaluated by monitoring afferent nerve signals under mechanical stimuli in a rat animal model.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권7호
• /
• pp.335-343
• /
• 2006

We have designed the system that measure one channel ECG by two electrode and extract real-time EDR with more related resipiration and comportable to subject by using conductive textile. On the assumption that relation between RL electrode and potential measurement electrode is coupled with RC connected model, we designed RL drive output to feedback two electrode for reduction of common mode signal. The conductive textile which was used for two ECG electrode was offered more comfort during night sleep in bed than any other method using attachments. In the method of single-lead EDR, R wave point or QRS interval area could be used for EDR estimation in traditional method, it is, so to speak, the amplitude modulation(AM) method for EDR. Alternatively, R-R interval could be used for frequency modulation(FM) method based on Respiratory Sinus Arrhythmia(RSA). For evaluation of performance on AM EDR and FM EDR from 14 subject, ECG lead III was measured. Each EDR was compared with both temperature around nose(direct measurement of respiration) and respiration signal from thoracic belt(indirect measurement of respiration) on mean squared error(MSE), cross correlation(Xcorr), and Coherence. The upsampling interpolation technique of multirate signal processing is applied to interpolating data instead of cubic spline interpolation. As a result, we showed the real-time EDR extraction processing to be implemented at micro-controller.