• 한국식품영양과학회지
• /
• 제3권1호
• /
• pp.29-34
• /
• 1974

1) It was found that melons stored at $20^{\circ}C$ were deteriorated mainly by phytophthora spot and the limits for commercial purpose were 6 days for the control and 4 days for the film packed sample. First of all, alternaria rot was produced after 8 days in control group and each group had cold-stroage hindrance after 20 days. The limits for commercial purpose determined by general appearance were 14 days for the control, 18 days for the 0.02mm and 16 days for the 0.04 mm group. 2) Seven to 8% of weight decrease was the limit of commercial purpose by general appearance. The amount of $CO_2$ excretion was decreased in $20^{\circ}C$ group and increased drastically with deterioration. The amount of $CO_2$, excretion during storage at $2^{\circ}C$ was about $\frac{1}{5}\;to\;\frac{1}{6}\;of\;20^{\circ}C$ 3) The usage of sugar for the substrate of respiration during storage was small and large amount of acids was used for this purpose. The sugar content was decreased with deterioration but acids were increased. The reducing sugar content was decreased and non-reducing sugar content was increased during storage.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.364-368
• /
• 2000

In this paper, we present the design and fabrication of a new circularly polarized circular patch antenna. The antenna is realized using a plastic foam sheet, a Teflon substrate and a metal-coated film. The radiating element is a circular patch proximity-fed by a wide microstrip line. Two thins slots are introduced on the circular patch to obtain a circular polarized radiation. The antenna is optimized using a commercial software. The antenna has 18% impedance bandwidth, 4% axial-ratio band width and 9.12dBi gain.

• 한국CDE학회논문집
• /
• 제14권2호
• /
• pp.122-128
• /
• 2009

The failure responses of adhesively bonded, hat stiffened structures are studied through numerical analysis using the finite element method. The responses are evaluated numerically for the bonded hat section/substrate structures containing different combinations of materials. It is studied what kind of material combinations causes the easier crack initiation in the structure. This study is conducted under plane strain conditions and J-integral via a commercial code ABAQUS as a total critical energy release criterion was used for observation on crack initiation. Also, the influence of adhesive on the structure is studied.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.169-172
• /
• 2002

Silver pastes for inner conductor in the Low Temperature Co-fired Ceramics (LTCC) are composed of silver powder, binder, solvent and additives. The composition of the chemicals have influence on rheology, printability, shrinkage rate, etc. In this study, commercial Ag pastes and Ag pastes made in KETI were investigated to find the relationship between characteristics of Ag paste and solid contents. Ag pastes with 68~90 wt% Solid Contents were tested. Substrate/paste matching property and conductivity of the conductor lines showed large dependence on solid contents of Ag paste.

• 한국응용과학기술학회지
• /
• 제37권4호
• /
• pp.723-732
• /
• 2020

RHDS 촉매는 코크와 황 화합물 그리고 금속인 바나듐이 표면에 침적되어 비활성화가 된다. 이러한 오염물을 제거하기 위해서 먼저 폐 RHDS 촉매에 묻어있는 중질유분의 세정, 코크와 황 화합물을 고온 배소 처리한 후, 과량으로 침적되어 있는 바나듐의 침출량을 조절하기 위하여 0.5, 1 wt% 옥살산 수용액을 이용하여 초음파 교반기에서 50 ℃, 10 sec 동안 교반하여 NOx 저감을 위한 SCR 촉매로의 적용 가능성을 확인하고자 하였다. 재생처리 한 RHDS 촉매의 성분은 XRF 를 사용하여 분석하였고, 상압 고정층 연속 흐름 반응기 상에서 NOx 저감 성능을 측정하였다. 옥살산 수용액 0.5 wt%, 10 sec 동안 초음파 침출한 촉매가 가장 안정적인 NOx 저감 성능을 보였으며, 375 ℃ 이상의 고온에서는 상용 촉매와 동등 수준의 NOx 저감 성능을 확인할 수 있었으나 저온영역 200 ℃에서 250 ℃까지는 상용 촉매보다 낮은 NOx 저감 성능을 보였다. 따라서 폐 RHDS 촉매를 재생처리 한 후 분말로 메탈 코로게이트 지지체에 워시코팅한 촉매는 상용 SCR 촉매로서 이용 가능함을 확인하였다.

• 한국수산과학회지
• /
• 제44권1호
• /
• pp.8-17
• /
• 2011

To identify and examine the distribution of proteolytic inhibitory activity in crude extracts from fish eggs, and to determine the applicability of these protease inhibitors as anti-degradation agents in surimi-based products and fish meat, we compared the inhibitory activities of various extracts from fish eggs to those of commercial proteases, such as trypsin and papain. We used the optimal conditions for the screening of trypsin activity: 30 ug/uL of 0.1% trypsin and 0.6 mM Na-benzoyl-L-arginine-p-nitroanilide (BAPNA) with a pH of 8.0 at $40^{\circ}C$ for 60 min. The activities of papain and four commercial proteases were investigated after mixing with 100 ug/uL enzymes and 0.3% casein with a pH of 8.0 at $40^{\circ}C$ for 60 min. We performed a screening assay to detect the inhibitory activity (%) of crude extracts from eight species of fish eggs against the target proteases trypsin and papain. The assay revealed a wide distribution of trypsin and papain inhibitors in fish eggs. The specific inhibitory activities (11.6.28.6 U/mg) of crude extracts from fish eggs against trypsin and BAPNA substrate were higher than that (0.64 U/mg) of egg whites, used as a commercial inhibitor. The inhibitory activities of crude extracts from fish eggs against trypsin, and of egg whites against casein substrate (1.94.4.51 U/mg), were higher than those of papain (0.24.1.57 U/mg) and commercial protease (0.04.0.32 U/mg). The extracts from fish eggs were rich in protease inhibitors that exhibited strong inhibitory activity against trypsin, a serine protease, and papain, a cysteine protease.

• 생물환경조절학회지
• /
• 제7권2호
• /
• pp.116-122
• /
• 1998

본 연구는 양액재배 카네이션의 생육을 증진시키기 위하여 최적 재배작형과 배지 종류를 구명코자 실시되었다. coir, perlite, coir＋perlite(1：1. v/v)등 3 종류의 배지와 5월 1일 정식, 9월 1일 정식 등 2 종류의 작 형에서 재밴한 후 생육을 조사 비교하였다. 절화 수확기에 초장과 줄기의 직경은 5월 1일에 정식한 식물 보다 9월 1일에 정식한 식물에서 컸다. 5월 1일에 정식한 경우는 식물체 줄기의 직경과 초장생장이 극히 저조하여 매우 약해졌다 꽃의 폭과 무게도 9월 1일에 정식한 식물체가 5월 1일에 정식한 식물체보다 증가되었다 꽃잎수는 정식시기에 따라 뚜렷한 경향을 보이지 않았다 개화소요일수는 5월 1일에 정식한 경우가 9월 1일에 정식한 경우보다 50일 이상 단축되는 결과를 보였다 재배배지별로는 처리간 큰 차이는 보이지 않았지만 coir를 사용했을 때 초장과 꽃잎수가 증가되었다. 실험결과 카네이션의 양액재배에서는 고온기를 회피한 작형, 예컨데 9월 상순, 중순에 정식할 필요가 있고 재배배지로 coir의 사용이 긍정적인 것으로 확인되었다

• 한국재료학회지
• /
• 제22권8호
• /
• pp.409-415
• /
• 2012

$TiO_2$ thin films for high energy density capacitors were prepared by r.f. magnetron sputtering at room temperature. Flexible PET (Polyethylene terephtalate) substrate was used to maintain the structure of the commercial film capacitors. The effects of deposition pressure on the crystallization and electrical properties of $TiO_2$ films were investigated. The crystal structure of $TiO_2$ films deposited on PET substrate at room temperature was unrelated to deposition pressure and showed an amorphous structure unlike that of films on Si substrate. The grain size and surface roughness of films decreased with increasing deposition pressure due to the difference of mean free path. X-ray photoelectron spectroscopy (XPS) analysis revealed the formation of chemically stable $TiO_2$ films. The dielectric constant of $TiO_2$ films was significantly changed with deposition pressure. $TiO_2$ films deposited at low pressure showed high dissipation factor due to the surface microstructure. The dielectric constant and dissipation factor of films deposited at 70 mTorr were found to be 100~120 and 0.83 at 1 kHz, respectively. The temperature dependence of the capacitance of $TiO_2$ films showed the properties of class I ceramic capacitors. $TiO_2$ films deposited at 10~30 mTorr showed dielectric breakdown at applied voltage of 7 V. However, the films of 500~300 nm thickness deposited at 50 and 70 mTorr showed a leakage current of ${\sim}10^{-8}{\sim}10^{-9}$ A at 100 V.

• 한국분말재료학회지
• /
• 제13권1호
• /
• pp.18-24
• /
• 2006

The brazing adhesion properties of Ag coated W-Ag electric contact on the Cu substrate have been investigated in therms of microstructure, phase equilibrium and adhesion strength. Precoating of Ag layer ($3{\mu}m$ in thickness) on the $W-40\%Ag$ contact material was done by electro-plating method. Subsequently the brazing treatment was conducted by inserting BCuP-5 filler metal (Ag-Cu-P alloy) layer between Ag coated W-Ag and Cu substrate and annealing at $710^{\circ}C$ in $H_2$ atmosphere. The optimum brazing temperature of $710^{\circ}C$ was semi-empirically calculated on the basis of the Cu atomic diffusion profile in Ag layer of commercial electric contact produced by the same brazing process. As a mechanical test of the electric contact after brazing treatment the adhesion strength between the electric contact and Cu substrate was measured using Instron. The microstructure and phase equilibrium study revealed that the sound interlayer structure was formed by relatively low brazing treatment at $710^{\circ}C$. Thin Ag electro-plated layer precoated on the electric contact ($3{\mu}m$ in thickness) is thought to be enough for high adhesion strength arid sound microstructure in interface layer.

• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.67-74
• /
• 2011

In this study, we have investigated the effect of the substrate temperature on the structural and the electrical characteristics of IZO thin films for the OLED (organic light emitting diodes) devices. For this purpose, IZO thin films were deposited by RF magnetron sputtering under various substrate temperature. The substrate temperature has been changed from room temperature to $400^{\circ}C$. Samples which were deposited under $250^{\circ}C$ show amorphous structure. The electrical resistivity of crystalline-IZO (c-IZO) film was higher than that of amorphous-IZO (a-IZO) film. And the electrical resistivity showed minimum value near $150^{\circ}C$ of deposition temperature. The OLED device was fabricated with different IZO substrates made by configuration of IZO/$\acute{a}$-NPD/DPVB/$Alq_3$/LiF/Al to elucidate the performance of IZO substrate. OLED devices with the amorphous-IZO (a-IZO) anode film show better current density-voltage-luminance characteristics than that of OLED devices with the commercial crystalline-ITO (c-ITO) anode film. It can be explained that very flat surface roughness and high work function of a-IZO anode film lead to more efficient hole injection by reduction of interface barrier height between anode and organic layers. This suggests that a-IZO film is a promising anode materials substituting conventional c-ITO anode in OLED devices.