• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.593-598
• /
• 2000

Experimental study is conducted to clarify the pneumatic characteristics of brake system for freight train. Empty-load and diaphragm brake systems are mainly installed in the freight trains owned by KNR(Korean National Railroad). Experimental train set is composed of sixteen freight train and one diesel locomotive that are now in use. From the experimental results, in case of commercial brake, empty-load brake system responds to the brake command more slowly than the diaphragm brake system. But, in case of release command, the response time of diaphragm brake system is shorter than that of empty-load one. In the emergency brake test, the decreasing rate of brake pipe pressure of tenth car is almost same that of decreasing rate of commercial brake service.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.159-164
• /
• 1993

This paper presents a computer design program for In-Core Instrumentation(ICI) guide tube routing and locations on support system, and checking the interference between ICI guide tubes in the reactor coolant system of typical Pressurized Water Reactor. The program, ICITRIC, has been written in FORTRAN language which is available under UNIX environment. Results of this program are compared with those of the commercial code, PATRAN, and both results are almost same Also the results may provide input data for ICI system static and dynamic analysis performed by the commercial code, SUPER PIPE. This program can simulate ICI guide tube routing and locations on support system, and checking the interference between ICI guide tubes. Through a process of iteration, the designer can apply initial conditions, and modify the routing until satisfied with the overall system performance.

• 한국수자원학회논문집
• /
• 제32권1호
• /
• pp.71-81
• /
• 1999

본 연구의 목적은 유전자 알고리즘 최적화기법을 이용하여 설계기준에 합당한 제약조건을 고려한 최소경비의 관망시스템의 설계를 목적으로 한다. 수리학적 제약조건들은 수리모의프로그램(KYPIPE)과 연계하여 가능해 영역을 수시로 검증하였다. 유전자 알고리즘은 비교적 새로운 최적화기법이다. 유전자 알고리즘은 매우 강력한 탐색능력을 가지고 있으며 특히 비선형 문제를 해결하는데 탁월한 성능을 가진다고 알려져 있다. 유전자 알고리즘은 계산결과로 제시되는 결정변수인 관경은 연속적인 수치가 아닌 이산적인 규격의 표준관경인 상업용 관경으로 제시되며 펌프용량까지 최적화시키는 효율적인 최적설계를 도모하고자 한다. 본 모형은 가상 및 실제 관망시스템에 적용하였다. 그 중 하나는 많은 다른 연구자들에 의한 간단한 관망에 사용된 논문들로부터 채택하였다. 그 결과의 비교는 이 연구에서 개발된 모형의 적합성을 보여준다. 또한, 본 모형은 최적펌프용량도 결정할 수 있으며 그 적용성을 검증하기 위하여 고양시에 적용시켜 보았다. 개발된 모형은 비교적 간단한 방법으로 관망시스템의 최적설계에 성공적으로 적용시킬 수 있음이 판명되어져 왔다.

• 한국가스학회지
• /
• 제16권2호
• /
• pp.1-8
• /
• 2012

국내의 경우 연평균 22건의 지하 가스관사고가 발생하며 그중 5 건이 외부 굴착공사에 기인한다. 삼자 굴착사고로 인한 가스관 폭발사고의 예방을 위한 방안으로, RFID인식 기술의 적용에 대하여 연구하였다. 지상에서는 RFID는 원거리 인식이 가능한 장점으로, 물류 및 자재관리 등 다양한 분야에 널리 이용되고 있지만, 지하에서는 인식거리의 제한으로 연구 및 적용 사례는 거의 없다. 본 연구에서는 지하에서 투과율이 비교적 높은 900 MHz대역의 주파수 리더기로 지하에 매설되어있는 RFID Tag의 안정적인 인식거리 및 적용법을 연구하였다. 실제 가스관이 매설되어 있는 조건과 유사하게 흙, 콘크리트5 cm+흙, 그리고 지중수에 Tag를 묻고, 지상에서 RFID 리더기로 최대 및 가능 인식 거리를 측정하였다. 안정적인 인식 거리는 사전 사고 예방이 가능한 거리로 볼 수 있는 50, 45, 25 cm로 나왔다. 더하여 시제품 중에서 24 byte정보를 담을 수 있는 Tag 에 효과적으로 필요한 정보를 넣는 방법을 제안하였다. 본 연구결과는 RFID인식기술의 지하 가스관 적용은 가스 사고를 예방할 수 있을 뿐 아니라 가스관 관리에도 도움을 줄 수 있음을 나타낸다.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.497-504
• /
• 2002

The purpose of this study is to analyze thermal cycles and to investigate microstructures of heat affected zones for a low alloy carbon steel pipe under a multipass weld. The commercial finite element code SYSWELD is used to compute thermal cycles during multipass weld. The numerical results such as thermal cycles and size of heat affected zone are compared with those of the experiment and the two results show a good agreement. In addition, the microstructure and hardness are investigated from the weldment in detail. The weakest location is founded at intercritical region near the base metal.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권8호
• /
• pp.883-890
• /
• 2005

The industrial growth and the raised living quality have led to the massive energy consumption. As a result. the polluted environment and the limited amount of energy resources emerged as serious problems to be resolved in 21st century. Especially, in the case of Korea whose imported energy dependency rate is 98.2$\%$ in 2003 and constantly increasing every rear. more than 24$\%$ of overall energy consumption is for housing and commercial use. In order to cope with the shortage of natural energy resources, it is inevitable to develop alternative sustainable energy resources including seawater heat. so that they can replace existing resources. The heat transfer air velocity 3.5 m/s is proper to consideration with the body the pipe size 200A is more suitable than look due to the air velocity quantify and the ratio of pipe surface area. And the error between experimental data with simulation is below 5.34$\%$ so the suggested equation for calculating heat transfer capacity can be used. Therefore out of many methods utilizing seawater heat. this work Presents the efficiency of using sea water heat as a resource for air-conditioners which can be converted from the outside air through the air-to-heat conversion tube . Consequently. this method provides pretty reasonable energy efficiency.

• 한국강구조학회 논문집
• /
• 제29권1호
• /
• pp.61-71
• /
• 2017

GFRP와 강관으로 구성된 합성형 보강링 대하여 설계를 진행하고 휨거동을 분석하여 실험 결과 및 유한요소해석 프로그램인 ABAQUS를 통한 결과와 비교하였다. GFRP 합성단면에 대한 유효폭을 ABAQUS beam모델과 이론값을 이용하여 검증하였으며, 또한 항복정도에 따라 변화하는 GFRP 보강링의 이론적인 변형률 값을 이용하여 항복하중, 균열하중, 극한하중을 구하여 실험결과와 비교하고 ABAQUS solid 모델을 이용하여 중립축의 변화를 확인하였다.

• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.66-72
• /
• 2010

The north and south panel of a geostationary satellite are used for radiator panels to reject internal heat and utilize several heat pipe networks to control the temperatures of units and the main structures of satellite within proper ranges. The design of these panels is very important and essential at the conceptual design and preliminary satellite design stage, so several thousands of nodes or more are utilized in order to perform detailed thermal analysis of panel. Generating a large number of panel nodes takes time and is tedious work because the nodes can be easily changed and updated by locations of units and heat pipes. Also the detailed panel model can not be integrated into spacecraft thermal model due to its node size and limitation of commercial satellite thermal analysis program. Thus development of a program was required to generate a detailed panel model, to perform thermal analysis and to make a reduced panel model for the integration to the satellite thermal model. This paper describes the development and the verification of the panel thermal analysis program with its main modules and functions.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.149-156
• /
• 2013

The performances of solar collectors with single and double evacuated tube were experimentally compared. The solar collector with single evacuated tube using surface treatment in this study consists of radiation fin, heat pipe, absorber plate, glass tube, cap and regulating valve, and so on. Surface treatment was conducted for heat pipe and absorber plate with black chrome plating and copper black coating. As the results, the performance of solar collector with single evacuated tube using surface treatment showed good results compared that of double evacuated tube. Absorber plate played a positive role in performance and showed increase of about 28%. Further performance depends on vacuum degree and vacuum degree has to be considered economical efficiency in solar collector.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.145-151
• /
• 2014

Recently, the growing demand for weight reduction and improved structure durabilityfor commercial vehicles has led to active research into the development and application of suitablecomposite materials. This studysuggests abimaterial composite frame produced by apultrusion process to replace steel frames. We focused on the development of a composite frameconsisting of two types of materialsby mixing anorthotropic material with anisotropic material. The inside layer consisted of an aluminum pipe, and the outside layer was composed of a glass fiber pipe. To determine the strength and failure mechanisms of the composite material, tensile tests, shear tests, and three-point bending tests were conducted, followed by fatigue tests. After static testing, the fatigue tests were conducted at a load frequency of 5 Hz, a stress ratio (R) of 0.1, and an endurance limit of $10^6$ for the S-N curve. The resultsshowed that the failure modes were related to both the core design and the laminating conditions.