• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.2039-2052
• /
• 1994

In this study, an expert system for multi-stage cold forging process design of axisymmetric parts is developed. The available geometries are axisymmetric shape and cylinder with a hold in one end. The overall system is composed of knowledge-based system for process sequence design, output module interfaced with CAD system and material data-base. In the developed system, designed process can be modified in order to reduce the number of processes and make the distribution of forming load be almost equal at various deforming stages within the machine capacity. After process sequence design is completed, results can be stored as a text file or a commercial CAD system file. The capabilities of the developed system are illustrated through various examples of process design.

• 연구논문집
• /
• s.23
• /
• pp.155-164
• /
• 1993

A drawing technique which use only fine curves and dashed lines is widely adopted in banknotes and post stamps printing. Engraving of the curves and lines are traditionally performed by hand skill which provides low productivity in printing. As an effort for higher productivity and quality, a drawing automation method which can easily produce NC codes and drawings for a mechanical or chemical engraving is proposed. An initial work shows that it is possible to draw a portrait by contolling the width and length of predetermined fine lines according to the gray scale at the end points of each line. User interface functions of a commercial CAD system are heavily employed to exploit the presented method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.169-172
• /
• 2000

In this paper, an OMM (On-the-Machine Measuring) system has been developed, which can perform measuring and inspection of sculptured surfaces of die and mold, by use of a scanning-type touch probe mounted into the spindle of a NC machine. The calibration procedures of a scanning prove (SP2-1, Renishaw) and an algorithm for measuring surface points by a ball-nosed stylus have been studied. The system has been developed based on commercial CAM software (Z-Master 2000), and tested through measuring a plastic injection molding-die. Also some experimental results of the calibration and measuring for given surface positions are analyzed to verify its accuracy and reliability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1467-1470
• /
• 2003

In order to enhance the productivity of design and manufacture of injection molds, various computer-aided systems have been developed and introduced to mold manufacturers. The customized 3-D CAD systems for mold design is one of the most representative computer-aided system. However, these systems usually do not provide a convenient way to access and manage design knowledge implemented in them. To overcome this shortage, knowedge-based engineering systems have been developed, and now they are imbedded as modules of commercial CAD systems. In this paper, we introduced a 3-D design system for standard mold base based on Knowledge Fusion, a commercialized KBE system imbedded in Unigraphics. By introducing KBE system, design knowledge can be exposed to the users and modified by the end-users.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.207-210
• /
• 2007

This paper describes the development of the grain design automation program using commercial CAD(computer-aided-design) software. This program allows to readily obtain output of burning area, volume, moments of inertial, motion of the center of gravity, and other geometric data as a function of regressed distance. These are utilized in performance analysis.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.794-801
• /
• 2006

The linkage framework of geometric modeling and analysis based on the NURBS technology is developed in this study. The NURBS surfaces are generated by interpolating the given set of data points or by extracting the necessary information to construct the NURBS surface from the IGES format file which is generated by the commercial CAD systems in the present study. Numerical examples shows the rate of displacement convergence according to the paramterization methods of the NURBS surface. NURBS can generate quadric surfaces in an exact manner. It is the one of the advantages of the NURBS. A trimmed NURBS surface that is often encountered in the modeling process of the CAD systems is also presented in the present study. The performance of the developed geometrically exact shell element integrated with the exact geometric representations by the NURBS equation is compared to those of the previous reported FE shell elements in the selected benchmark problems.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.801-806
• /
• 2000

This study deals with the design of snow plow for the special equipment vehicle. The purpose of the study is to develop the snow plow that can install in the special equipment vehicle such as clean up vehicle or dump truck in winter season. To do so, it is designed by 3 sub-assembly - snow shovel, main frame, and hydraulic cylinder and its support. The snow shovel consists of 3 pieces to meet the road profile and to exchange easily the damaged parts. Main frame connects the snow shovel with the hydraulic cylinder and its support and supports the weight of snow. Finally, the hydraulic cylinder and its support move the snow shovel up and down and tilt it. We designed it using 3D commercial CAD software for concurrent engineering design.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.552-552
• /
• 2000

In recent years, a number of successful nesting approaches have been developed by using the various heuristic algorithms, and due to their application potential several commercial CAD/CAM packages include a nesting module for solving the layout problem. Since a large portion of the complexity of the part nesting problem results from the overlapping computation, the geometric representation is one of the most important factors to reduce the complexity of the problem. The proposed part representation method can easily handle parts and raw materials with widely varying geometrical shape by using the redesigning modules. This considerably reduces the amount of processed data and consequently the run time of the computer. The aim of this research is to develop parametric macro for two-dimensional cutting stock on the Auto-CAD system. Therefore, this research can be called "pre-nesting"

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.182-188
• /
• 1996

The hull form design is the first step of the concurrent ship design and production. At this point of view, to provide the hull form design system is very important to build the CIM system in shipbuilding. For this, we described about the functionality and the practices of the hull form design for the initial design stage based on the CIM concept. Also, we developed the hull form design system (DWHULL) using commercial 3D-CAD system. In the conclusions, we suggested the advance of the system and the direction of further development functions.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.6
• /
• pp.381-391
• /
• 2005

The design methodology of injection molding die has been changed from two-dimensional drafting to three-dimensional solid modeling, which is due to many advantages over the conventional methodology in terms of design modification and data associativity. In addition to the solid modeling capability, it is required for a mold designer to utilize a database management system that facilitates efficient mold design. In the paper presented is the implementation of a software program which automatically generates three-dimensional mold-bases including standard parts and slider parts, conforming to given geometric constraints. It is based on a commercial CAD system (Unigraphics NX) along with related API (application program interface) libraries. The research is expected to reduce design efforts and simplify construction of a complex three-dimensional mold-base model that is comprised of standard parts and slider parts, by use of the three-dimensional database and automatized geometric dimensioning.