• Journal of Fashion Business
• /
• v.11 no.1
• /
• pp.75-85
• /
• 2007

This study aims to develop the hospital clothing for dementia patient, which can bring them higher quality of life by giving them psychological and emotional satisfaction. As for the research method and contents, the authors searched the characteristics of aging society and dementia patient, mainly concentering on the related researches and publications. In addition, the characteristics of current domestic clothes design trend for dementia patient and design preference were studied by looking into previous studies. Also, on the characteristics of overseas design was examed by looking into sites on dementia, actual clothes and related catalogues. The development and evaluation of the design of clothes for dementia patient was conducted and which was based on the above researches. Then, the patients hospital clothing was designed and made. And also the discussion was followed with related field experts such as medical doctor and nurses, carer-givers, patient clothing manufacturers and professors of clothing textiles. Finally the authors designed and manufactured six patient clothes including one for male, one for female, two for common use in hospital, one for disable male dementia and one for disable female dementia. The developted clothes got high marks on beauty and symbolism in the evaluation by the experts. The design development of dementia patient clothes in this research will help the dementia patients' psychological comfortness and social protection.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.160-162
• /
• 2013

본 논문에서는 스테레오스코픽 디스플레이에 사용되는 스테레오 영상의 피로도를 분석하여 스테레오 영상의 시청 및 제작에 응용될 수 있는 시스템을 제안한다. 스테레오 영상의 피로도는 스테레오 영상의 시청 및 제작 시 영상의 품질을 향상시키기 위해 고려해야 할 가장 중요한 요소이나, 현재 이에 관한 국제 표준이 정해지지 않아 디스플레이 및 스테레오 영상 제작자마다 다른 기준으로 피로도를 분석하고 있다. 따라서, 본 논문에서는 시청자의 신체적 특성, 디스플레이 장치의 크기, 시청거리, 영상의 특성 등 시청자의 피로도에 영향을 미치는 모든 요소를 종합적으로 고려한 실용적인 피로도 분석 시스템을 제안한다. 제안하는 피로도 분석 시스템은 The zone of comfortness 와 peak signal to noise ratio (PSNR) estimation 기술을 응용하여 영상의 시차(disparity), PSNR, 디스플레이 크기, 시청거리, 시청자의 양안 거리로부터 수렴-조절 불일치 (vergenceaccommodation conflict)와 양안 입사 자극 불일치 정도를 추정해 스테레오 영상의 피로도를 계산한다. 제안하는 시스템을 통하여 스테레오스코픽 디스플레이 장치에서 영상과 시청자 특성을 고려한 최적의 시청환경을 시청자에게 제안할 수 있으며, 스테레오 영상 제작에 있어 목표 시청 환경에 대해 피로도를 최소화할 수 있는 영상의 제작 등의 응용이 가능하다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.102-106
• /
• 1997

본 연구는 실내 온열환경에 대한 인간의 온냉감을 정밀하게 평가하기 위해 바닥난방이 실시되고 있는 겨울철 아파트의 거실에 대하여 공간내의 온도분포를 조사하는 동시에 신체부위별로 온냉감을 조사하였다. 실내의 온도분포 측정은 서울과 부산의 두 장소에서 실시하였으며, 온냉감에 대한 평가는 서울에서 남자 31명, 여자 71명, 부산에서 남자 11명, 여자 23명에 대하여 수행되었다. 결과는 중앙집중식 난방이 실시되고 있는 거실의 바닥으로부터 10cm높이와 170cm 높이에서의 온도차이는 서울의 아파트가 3.2 $^{\circ}C$, 부산의 아파트가 2.$0^{\circ}C$로 나타났다. 겨울철 실내의 온냉감 조사는 하루 3 회 실시되었으며, 신체의 3개부위에 대한 온냉감과 전체적인 온냉감이 7점 척도로 평가되었다. 결과는 발과 얼굴, 무릎과 얼굴, 발과 전신사이에 온냉감의 차이가 있는 것으로 나타났다. 발과 무릎 부위가 얼굴에 비하여 추운느낌을 강하게 가지며, 전체적인 온냉감은 얼굴부위에서의 평가와 유사한 수준을 나타냈다. 난방이 단순한 온도조절의 범위를 넘어 인체의 온열쾌적감을 만족시키기 위해서는 신체의 부위별로 느끼는 온냉감을 정밀하게 평가하여 난방의 방법을 조정하여야 하는데, 이 연구의 결과는 난방의 방법 결정에 기초자료로 활용될 수 있을 것이다.

• Archives of Reconstructive Microsurgery
• /
• v.13 no.1
• /
• pp.68-73
• /
• 2004

Transverse rectus abdominis muscle (TRAM) free flap is widely used for breast reconstruction, however donor-site morbidities such as abdominal wall weakness, hernia, bulging are troublesome. For the purpose of minimizing donor-site morbidity, there has been a surge in interests in muscle sparing free TRAM flap preserving the anatomy of rectus abdominis muscle, fascia, and motor nerve. The purpose of this study is to investigate complication and morbidity after muscle sparing free TRAM flap. Between August, 1995 and May, 2003, there were 108 cases of muscle sparing free TRAM flap of breast reconstruction. There was no abdominal hernia. There were 4 cases of dog ear, 3 cases of marginal necrosis of apron flap, 2 cases of asymmetry of umbilicus. At 1 year after operation, most patients feel comfortness in physical exercise. Muscle sparing free TRAM flap provides ample amount of well vascularized soft tissue with small inclusion of rectus abdominis muscle and fascia. Also it minimizes donor-site morbidity with rapid recovery of abdominal strength.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.1
• /
• pp.27-36
• /
• 2000

One of the methods to improve the softness and comfortness of denture base is the use of soft denture liners. In this study, specimens were made by 2 kinds of acrylic based soft lining materials and 2 kinds of silicone based soft lining materials, and bonded to acrylic resin(Lucitone $199^{(R)}$). Then they were tested the differences of tensile bond strengths according to the materials, thickness, surface treatment and failure mode. 1. Tensile bond strength according to soft lining materials was increased in order of Coe-$soft^{(R)}$, $Mollosil^{(R)}$, $Trusoft^{(R)}$, Ufi-Gel $C^{(R)}$. The differences between groups were statistically significant at level of 0.05. 2. Tensile bond strength according to thickness of soft lining materials was increased in order of 3mm, 2mm, 1mm. The differences between groups were not statistically significant. 3. Tensile bond strength of treated surface showed higher bond strength than nontreated surface. The difference between groups was not statistically significant. 4. The failure mode of Coe-$soft^{(R)}$, $Trusoft^{(R)}$, $Mollosil^{(R)}$ were mainly cohesive failure, and that of Ufi-Gel $C^{(R)}$ were mainly adhesive failure.

• Korean Journal of Health Education and Promotion
• /
• v.25 no.3
• /
• pp.1-19
• /
• 2008

Purpose: The research was performed to distinguish the group of users of the health promotion programs in health care center, to identify the characteristics of this group, and to investigate the factors that have influence on the use of the health programs. The specific research purposes are: First, to compare the group which uses the health promotion program of health care center and that which does not. Second, to analyze the factors that have influence on the use of the health promotion program. Method: This study was done from November 15th 2006 and March 30th 2007. The study subjects were Seoul and Provinces. Seoul was divided into 4 areas of eastern western, northern, and southern area. Provinces were Gimchon, Gumi and Sosan. From each area, one health care center was chosen from the ones that wanted to participate. Total number of observations was 994. The survey questionnaire consisted of individual, interpersonal, organizational, community, policy factors based on socio-ecological model. The analysis method was logistic regression. Results: Odds ratios of individual factors is sex(1.39), age(1.05), marriage status(1.71) severity(1.20). Odds ratios of interpersonal factors is use and support of family(1.96), use and support of resource persons like friends and neighbor(4.58). Odds ratios of organizational factors is the comfortness of space(0.74), the satisfaction of health care center facility(1.40), kindness of employ(1.97). Odds ratios of community factors is health care center program recognition(1.70). Odds ratios of policy factors is advertisement(4.69) and expense(1.42). Conclusion: Socio-ecological model of health promotion in health care center is obtained based on five factors and health planners should consider these determinants of health promotion program in health care center and develop intervention methods.

• Archives of Plastic Surgery
• /
• v.32 no.1
• /
• pp.117-123
• /
• 2005

The reconstructive modalities for vaginal reconstruction include simple dilatation, skin graft, use of intestinal segments and various methods using flaps. However, skin grafting procedure is the most commonly used technique and the McIndoe procedure is a representative technique among skin grafting procedures. McIndoe procedure is easier, faster and has a lower morbidity compared to other techniques. However the conventional McIndoe procedure has several problems such as incomplete vestibule formation, excessive bleeding during dissection, possibility of recto-vaginal or urethro-vaginal fistula formation, late vaginal contracture and discomfort in wearing hard plastic mold for a long time after operation. To solve these problems, the authors modified the conventional McIndoe procedure in several perspectives. The undeveloped vestibule was incised with X-shaped mucosal incision between the urethral opening and posterior margin of the vestibule and deepened by blunt finger dissection to provide a sufficient diameter & length of the neovagina and to minimize bleeding. A sizable medium thickness split skin graft was harvested and wrapped over a roll gauze-filled condom mold. Applying multiple stab incision on the skin grafted condom mold, it was inserted into the prepared neovaginal canal. Distal margin of the skin graft was secured with tips of the mucosal flaps created by X-shaped vestibular incision to prevent accidental extrusion of the skin grafted mold. During last 15 years, we applied this modification to 20 vaginal agenesis patients and investigated results of the 12 patients who could be followed up serially including hematoma formation and skin graft survival rate, size, depth, presence of late contracture, appearance, comfortness, and hygiene of the neovagina. And they were compared with 8 patients of 20 patients who underwent conventional McIndoe procedures. The modified McIndoe procedure revealed lower complication rate, higher patient satisfaction and better functional results.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.121-133
• /
• 2008

Conventional car following models are controlled when the velocity of following vehicle is equal to preceding vehicle without consideration of relative distance. Also, since the car following models are hardly consider the driver's behaviors and the environmental factors in driving, the models can't be adopted in reality. Hence, we developed the car following model applying Human Factors to consider driver's safety and comfortness. We simulated to compare the suggested model with the existing model, GGM(General GM). As results of simulations, the GGM model followed the preceding vehicle when the velocity of following vehicle was equal to preceding vehicle without relation of relative range. The other side, when the relative range was less or over than safety range, the suggested model made the relative range equal to safety range. Accordingly, we could be sure that the model would decrease the driver's discomfort and intensify the safety on driving without unnecessary waste of road. We identified that the suggested model is more realistic than the conventional GGM model.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.2
• /
• pp.53-60
• /
• 2011

When designing building structures, dynamic serviceability is one of the most important items. Much research is being carried out on machine vibrations that affect inside residents and expensive equipment in the building structure. The vibration effect generally depends on the mass ratio, and an adequate mass ratio is determined by comparison with the serviceability limit according to the criteria. This study investigates the evaluation of vibration serviceability by using ISO 2631 to confirm the propriety of adequate mass ratios and it is verified that the application of a complicated FE model to model the real large shaking table facility with the mathematical model simulated as a SDOF system. The weighted RMS value is then compared with the comfort limit given by ISO 2631. As a result, the analysis of the numerical model is consistent with analysis of the FE model. Moreover, it is found that the adequate mass ratio of the concrete foundation and shake table, considering the self-weight of the real facility, should be less than 0.013. It is also confirm that the sample facility is satisfies the requirement of an adequate mass ratio.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.492-499
• /
• 2002

The objective of this study is to identify the attribute factors for fast food selection according to their characteristics of the use behaviors and demographics. The results of these findings suggest the attribute factors for selection were classified into ten : physical service, cleanliness/promptness, human service, convenience/promotion, accessibility, menu variety, food quality, service for child and parking, added service, and comfortness. “Cleanliness” and “good taste” were considered as determining factors in selecting a fast food restaurant. According to the consumer's use behaviors and demographics, attribute factors for fast food selection were significantly different. Therefore, the marketers and managers on the fast food industry should develop their own appropriate marketing strategies and implement effective targeting, positioning, and promotional strategies.