• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.174-180
• /
• 2013

The vibration characteristic of tire is heavily related to the noise and comfort on driving. Therefore, in this paper, we investigate modal charateristic of non-pneumatic tires with Honeycomb spokes. The modal analysis of non-pneumatic tire is investigated for geometric of non-pneumatic tire(NPT) which is designed according to the cell angle of honeycomb cell. Investigation of natural frequencies and mode shapes of non-pneumatic tire are compared regular type NPT with auxetic type NPT. The analysis is based on the finite element method and used ABAQUS program which is able to analyze of non-linear. The material of NPT is used for the Ogden energy model which is model of hyperelastic material. As a result, natural frequencies and mode shapes of non-pneumatic tires with honeycomb spokes are affected by the angle of honeycomb cell.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.3 s.31
• /
• pp.295-303
• /
• 1989

This study is to measure the thermal resistance of 7 types of Parka of different materials with thermal manikin and to compare their effects on physiological responses & subjective wear sensations. Following are the results obtained from the experiments 1) From the thermal manikin experiment, i) As an outer layer, although not significant, water proof fabric was warmer than water proof-vapor permeable fabric. ii) In case of insulating material, down was better for thermal resistance than polyester wadding of the same thickness. Moreover, as the down was thicker, it had more efficiency in thermal resistance. However, the marginal efficiency of thickness was found to be decreasing. 2) From the male-subject experiments, i) Chest temperature, mean skin temperature & microclimate temperature showed the same results on thermal resistance as those of the thermal manikin experiment. ii) Only during rest periods, there was a significant difference among 5 insulating materials in the sense of microclimate humidity. The almost same conclusion was obtained from the above experiments. Even the outer layer did not significantly affect thermal resistance & subjective wear sensation, insulating materials had a significant influence upon them. But in case of 3.5 cm down, it gave less comfortable than that of the thinner. Therefore the optional one for the best comfort & thermal resistance among 7 combinatins is the outer layer of water proff-vapor permeable & insulating material of 2.1 cm down.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.239-249
• /
• 2015

This study was focused on how the various materials of footwear affect the preferences of functionality and the level of discomfort when wearing. Datas were collected using questionnaire, age of 20's to 50's of female and male. Results were analysed using SPSS WIN 2.0 through t-test and ANOVA test. Results are as follows: In the preferences of materials of footwear, datas showed the shoes are of genuine leather, the sneakers are of textiles, the sandals are of man-made leather and the boots are of genuine leather. The important factor to the preferences of the materials were the leathers in the durability, the man-made leathers in easy-care and maintenance, the rubber and the complex materials in comforts. The level of the discomforts of the footwear were highly ranked in genuine leather, the man-made leather and the complex material with man-made leather and textiles followed. Man-made leather and the textiles represented the discomfort in the ankle. Mostly discomforts of the footwear showed in the sole and the top side of the foot in all kinds of footwear. The preferences in functionality were collected by the female, also female preferred the comfort the first, male preferred the durability. And the texture and the durability were highly preferred in aged female and male.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.71-80
• /
• 2006

A construction robot has been developed for higher productivity and better safety in various construction fields. Especially, curtain wall is suitable for outer wall material of tall commercial building and apartment complexes. This heavy material is, however, hard to install with a manpower and outdated equipment. For this reason, the prototype of ASCI (Automation System for Curtain wall Installation) was developed. This system has a robot controller(i.e. hand-held remote control unit) for the transfer information signal between human operator and robot system. Although study has been conducted on manual controller of ASCI, hardly any information is known about the operator's opinion. In this study, a questionnaire was completed by operator to get their opinion about aspects which need to design a more comfortable and productive manual controller of construction machinery, robot included. Through the result of study, it is expected that this technical data is contributed to the robot controller design for comfort and productivity of various industrial machinery.

• Research in Community and Public Health Nursing
• /
• v.13 no.3
• /
• pp.566-573
• /
• 2002

A concept is a building block of a theory. The purpose of a concept analysis is to clarify the critical attributes of a concept and identify its real meaning, particularly if the concept is not understood in a clear and accurate manner. This study was conducted to analyze the concept of support, which has been adopted from another discipline and unclearly used in nursing science. For concept analysis of this study, Walker and Avant's method was used. Support is defined as a domain with emotional. informational. material and evaluative aspects. Critical attributes of the concept of support included (1) an experience of support between a support provider and a client, (2) communication, (3) a relationship of mutual interchange of emotional, informational, material, evaluative support, and (4) intention, Cases related to the concept of support included model cases and appendix cases (against. boundary, and related). Antecedents of support were anxiety, depression, and loss of self-esteem, and consequences of support were comfort, increase of self-esteem, and trust. Based on these results, a nursing intervention that can provide a better quality of life for the prevention of diseases, health management, and health promotion may be developed in the future.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.227-236
• /
• 2018

As consciousness of safety becomes an important social issue, the demand for protective clothing is increasing. Conventional flame-retardant cotton working wear has low durability, and working wear with m-aramid fibers are stiff, heavy, less permeable, and expensive. In this study, recycled m-aramid and cotton have been blended to produce woven fabric of different compositions to enhance high performance and comfort to solve aforementioned problems. The fabrics were analyzed according to constituents and various structural factors. Mechanical properties were measured using KES-FB system. The measured thermal properties are TGA, $Q_{max}$, TPP and RPP. Fabric with polyurethane yarn covered by m-aramid/cotton spun yarn is observed to have good wearability. The fabric of open end spun yarn showed more stiffness than that of ring spun yarn. The sample with the high count of yarn has more smooth surface. In addition, high m-aramid content fabric is considered to have relatively high stiffness when using as clothing. In TGA the fabric with higher m-aramid content showed more stable decomposition behavior. The fabric having rough surface showed lower heat transfer properties in $Q_{max}$. The influence of the fabric thickness was important in convection and radiant heat test.

• Journal of Fashion Business
• /
• v.26 no.2
• /
• pp.83-94
• /
• 2022

The purpose of this study was to analyze the reality of clothes-wearing among physically disabled women and propose trouser designs. As a research method, an in-depth interview method was adopted for 10 women in their 30s and 50s with lower limb disabilities who could wear trousers and use wheelchairs. The study results identified the following factors that should be considered in the design of trousers. First, a semi-casual design that could hide physical deficiencies, was not different from ready-made clothes and enabled various looks was desirable. Second, the proper material would have little transformation in the form, have remarkable durability and laundry fastness, two-directional stretch, and hide deficiencies with a sense of thickness and density. Third, an "L-frame" pattern in a sitting position, and a straight fit were desirable. Finally, pockets can impose pressure according to their form, size, position, and sewing method, highlighted the need for a sewing approach to minimize seams in the fabric. For adjustment, an elastic band would be a good choice in terms of type, length, position, and material as it could satisfy both the convenience of putting on and taking off and comfort in wearing at the same time. Decorative design details can also impose pressure according to a sense of thickness, which means that they should be avoided in parts that are close to the body or can impose pressure according to posture.

• Science of Emotion and Sensibility
• /
• v.25 no.2
• /
• pp.55-70
• /
• 2022

In the 21^st century, the demand for eco-friendly leather, such as eco-leather and vegan leather, is steadily increasing. This study examines the influence of eco-friendliness on consumers' purchasing intentions and the possibility of eco-friendly changes in the fashion accessory market, which is dominated by leather material and leather substitutes. This study administered a questionnaire survey to 227 males and females between 20 and 60 years of age in Korea. With a 5-point Likert scale, data were collected on evaluation criteria when purchasing shoes and bags and purchasing intention of various leather substitute materials according to the democratic variables. The eco-friendliness attitude was divided into eco-consciousness and green behavior. As the eco-friendly attitude increased, most purchasing standards increased, but the purchasing criteria, such as trends, brands, and prices, did not correlate with the eco-friendly attitude. The eco-consciousness of a consumer had a high correlation with the design evaluation criteria, while the green behavior of the consumer aligned with durability and comfort criteria when purchasing a bag. There was a preference for recycled leather, vegetable leather, synthetic leather, and chemical leather, and the fabric type was ranked as natural fiber, biodegradable fiber, and synthetic fiber. Consumers with both green behavior and eco-consciousness are more likely to purchase biodegradable textiles and vegetable leather for the material of shoes and bags.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.162-167
• /
• 2011

Thermal storage plays an important role in building energy saving, which is greatly assisted by the incorporation of latent heat storage in building materials. A phase change material is a substance with a high heat of fusion which, melting and solidifying at a certain temperature, can be storing and releasing large amount of energy. Heat is stored or released when the material changes from solid to liquid. Integration of building materials incorporating PCMs into the building envelope can result in increased efficiency of the built environment. The aim of this research is to identify thermal performance of PCMs impregnated building materials which is applied to interior of building such as gypsum and red clay. In order to analyze thermal performance of phase change materials, test-cell experiments and simulation analysis were carried out. The results show that micro-encapsulated PCM has an effect to maintain a constant indoor temperature using latent heat through the test-cell experiments. PCM wallboard makes it possible to reduce the fluctuation of room temperature and heating and cooling load by using EnergyPlus simulation program. Phase change material can store solar energy directly in buildings. Increasing the heat capacity of a building is capable of improving human comfort by decreasing the frequency of indoor air temperature swings so that the interior air temperature is closer to the desired temperature for a long period of time.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.241-249
• /
• 2022

As for military backpacks in Korea, utility backpack products equipped with various functions along with comfort and convenience are being developed. As a result, the volume and weight of the backpack increase, and many lightweight studies of the materials forming the backpack are being conducted. This study is a basic study on frame lightweight using fiber-reinforced composites to deal with aluminum, a back frame that maintains the shape of a backpack and provides stability when worn by combatants. As is known, only fiber-reinforced composites have sufficient light weight and mechanical properties, but the mechanical properties were reviewed by drilling holes to maximize the light weight. Tensile strength and flexural strength were measured by drilling 6mm, 12mm, 18mm, and 24mm holes, and the tensile strength and flexural strength were measured when 1, 3, 5, and 7 holes of 12mm were increased. As a result, even when the number of holes was increased, tensile strength did not change significantly, and the flexural strength showed to be higher in the case of 3 holes and 5 holes than in the case of 1 hole.