• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.861-866
• /
• 2012

Turbo-charger noise radiated from air intake part is one of the most important noise sources in diesel power plant. In this paper, intake noise control of the diesel power plant was studied using parallel baffle type silencer and concentric hole-cavity resonator simultaneously. Firstly, acoustical characteristics and attenuation performance for parallel baffle type silencer were investigated through theoretical approach and experimental method. Based on the results, optimal design of the parallel baffle silencer was suggested. Secondly, for reducing the low frequency noise contained in the intake noise, the concentric hole-type resonator was developed and the acoustic performance was verified from the test. By combining two types of silencers, it is expected that the overall insertion loss is about 50 dB. So, the combined silencer is very helpful in reducing the intake noise of diesel power plant.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.95-101
• /
• 2006

Minimum weight design of laminated composite panel under combined loading was studied using linear and nonlinear deformation theories and by closed-form analysis and finite difference energy methods. Various buckling load factors are obatined for laminated composite panels with rectangular type longitudinal stiffeners and various longitudinal length to radius ratios, which are made from Carbon/Epoxy USNl25 prepreg and are simply-supported on four edges under combined loading, and then for them, minimum weight design analyses are carried out by the nonlinear search optimizer, ADS. This minimum weight design analyses are constructed with various process such as the simple design process, test simulation process and sensitivity analysis. Subseguently, the buckling mode shapes are obtained by buckling and minimum weight analyses.

• Transactions of Materials Processing
• /
• v.9 no.3
• /
• pp.242-248
• /
• 2000

This paper is concerned with the family of parts that generally feature a central hub with radial protrusions. Radial Extrusion is usually used in order to produce complex parts, which is combined with upsetting and/or forward and backward extrusion. Typical parts that fall into this category include cross pieces for universal joints, key-shaft type parts, tube fittings, and differential gears. In this paper, the forming characteristics of radial extrusion combined with forward extrusion is investigated by comparing the punch and mandrel loads. The design factors during radial extrusion combined with forward extrusion are applied to the simulation to see how much those factors have effect on the forming loads. The rigid-plastic FEM is applied to the simulation.

• Journal of Environmental Science International
• /
• v.25 no.10
• /
• pp.1397-1405
• /
• 2016

Mussels are stubborn organism attached to solid substrate by byssus threads and caused operational problems in utility of power generating stations. Sole and combined usage of ultrasonic (28 kHz- and 42 kHz- frequencies) and hydrogen peroxide ($H_2O_2$) has studied for control of blue mussel larvae and adult stage in seawater condition. A theoretical wo rking model using disinfection (Chick and Watson type) approaches is presented based on helpful results of experiments. This study also demonstrate that the combined treatment (ultra-sonication with $H_2O_2$) is overall highly efficient than individual treatment would, but on the basis of exposure time, the ultra-sonication was the most efficient among them. Therefore the development of sole and combined technique might be effective practical mitigation strategy against mussel attachment for water handling facilities.

• Journal of the Korean Society of Safety
• /
• v.13 no.3
• /
• pp.24-31
• /
• 1998

Variable thickness plates are commonly encountered in the majority of mechanical/structural components of industrial applications. And, as a result of the unsymmetry of the structure or the load and the anisoptropy of the materials, the cracks in engineering structures are generally subjected to combined stresses. In spite of considerable practical interest, however, a few fracture mechanics study on combined mode crack in a variable thickness plate have carried out. In this respect, combined mode I/III stress intensity factors $K_I$ and $K_III$ at the crack tip for a variable thickness plate were obtained by 3-dimensional finite element analysis. Variable thickness plates containing a central slant crack were chosen. The parameters used in this study were dimensionless crack length $\lamda$, crack slant angle $\alpha$, thickness ratio $\beta$ and width ratio $\omega$. Stress intensity factors were calculated by crack opening displacement(COD) and crack tearing displacement(CTD) method.

• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.15-17
• /
• 2013

In the design of combined cycle power plants, the design parameters considered mainly could be changed and added for performance evaluation with change on the design objective and method. Therefore, the design criteria considering the different objectives and type of power plant were needed. Thermodynamic and economic analyses of various types of gas turbine combined cycle power plants with demand on generation of power and heat and carbon capture system from high pressure flue gas have been performed to establish criteria for optimization of power plants.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.7
• /
• pp.593-600
• /
• 2015

In this study, a combined hybrid rocket system is newly introduced which has characteristics of both gas generators and afterburner type hybrid rockets. In particular, a combined gas generator utilizing solid fuel and liquid/gas oxidizer was designed as a primary combustor of the system. Combustion tests were carried out with various equivalence ratio affected by parameters such as fuel length, oxidizer flow rate, fuel port diameter and fuel type. In general, fuel-rich gas generator produces low combustion gas temperature to meet the temperature requirement and the target temperature was transiently set less than 1600 K. Since it was found that controlling parameters showed limited effects on the change of equivalence ratio, mixture of $O_2$ and $N_2$ as an oxidizer was additionally introduced. As a result, a combined gas generator successfully produced combustion gas temperature of less than 1600 K Future studies will carry out more combustion tests to attain fuel-rich combustion gas temperature less than 1200 K, which was a temperature requirement of a gas generator system in the previous studies.

• Research in Community and Public Health Nursing
• /
• v.8 no.2
• /
• pp.178-196
• /
• 1997

The purpose of this study is to identify the kind, the frequency, and the type of Stress Management Program(SMPs) throughout life-span used foreign, recent research. The period of this study was from July 1 to Dec. 10, 1997. The data were collected through Medline using two concepts: stress management programs and life-span. The number of these research were 106 and thirty-one experimental researches that were tested the effectiveness of SMPs throughout life span were selected. The data were analysed by the kind, frequency, and life-span. The results were as follows: 1. The kind and frequency of SMP : The total number of the kind of SMP were twenty-two. The most used SMP was relaxation therapy, 22 out of 31. The second biofeedback was 10, the third, cognitive behavior program was 9, the fourth, nutrition and diet, and education were 7. The others were coping skill(4), cognitive therapy(4), breathing(4), imagery(3), autogenic training(3), sleep and rest(2), meditation(2), information(2), desensitization(2), hypnosis(2), behavior therapy(1), time management (1), visualization(I), yoga(I), diversion(1), and problem solving skill. 2. Throughout life-span: Most SMPs were applied to adolescents, young adults, and middle-adults. Other subjects could not be found under the schooler. 3. The type of SMPs : 28(90.3%) out of 31 research used combined-SMP : two-combined SMP, 5: three-combined SMP, twelve: four-combined SMP, seven: five-combined SMP. 4. Afterward, further study such as meta-analysis are needed in order to identify effective ness of the SMPs.

• Clinics in Shoulder and Elbow
• /
• v.2 no.2
• /
• pp.115-119
• /
• 1999

Purpose: We reviewed the SLAP lesions and associated injuries, also evaluated a hypothesis that the type II posterior SLAP lesion is related with posterior rotator cuff tear and gives rise to the postero-superior instability. Materials and Methods: The patient recording papers, MRI, video and operation sheets were reviewed with the 28 SLAP lesions confirmed by the arthroscopy among 242 cases. Among these SLAP lesions, type II was 22 cases and classified to the anterior, posterior(16 cases), combined subtype(6 cases) based on the main anatomic location. There were 14 cases of the type II accompanying rotator cuff tear. The average follow-up(13 months) results were evaluated with the ASES and Rowe rating score after repair or debridement of the SLAP lesions. Results: In the type II lesions accompanying the rotator cuff tears(14 cases), the posterior(l0 cases) and combined type(4 cases), cuff lesions were all existed posteriorly. Also We could confirm the drive-through sign in the eleven cases, though did not check the disappearance of this sign after repair because of retrospective study. We could followed up the 22 cases, 18 cases(77%) were excellent or good, fair 3 cases(14%) and poor 1 case(4%). Also, type II lesions with the rotator cuff tear(14 cases) were showed better results in the repair(8 cases) than the debridement(6 cases) of the unstable type II with the cuff repair. Conclusion: The type II lesions were frequently associated with the cuff tear in the specific location. We could presume the possibility of postero-superior instability in the SLAP lesion with the cuff injuries. Also, satisfactory results could be experienced when the unstable SLAP lesions with the cuff tear were repaired at the same time.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.277-285
• /
• 2014

The purpose of this study is to investigate experimentally the variation factors range having influence on the rheological properties of the combined self-compacting concrete according to materials quality, weighting error and site conditions. Two types cement (blast-furnace slag cement and belite cement), lime stone powder as binder and the optimum mix proportions in the preceded study are selected for this study. Also, variations for sensitivity test are as followings; (1) Concrete temperature 3 cases (2) Surface moisture of sand 5cases (3) Fineness modulus of sand 5cases (4) Specific surface of lime stone powder 3cases (5) Dosage of chemical admixture 5cases. Slump flow ($650{\pm}50mm$), 500 mm reaching time (($7{\pm}3sec$), V-type flowing time ($15{\pm}5sec$) and U-box height (min. 300 mm) are tested for sensitivity. As test results, the variations range for quality control are as followings. (1) Concrete temperature; $10{\sim}20^{\circ}C$(below $30^{\circ}C$) (2) Surface moisture of sand; $base{\pm}0.6%$ (3) Fineness modulus of sand; $2.6{\pm}0.2$ (4) Dosage of chemical admixture; $base{\pm}0.2%$ (5) Specific surface of lime stone powder $6000cm^2/g$. Compared with two types cement including based belite cement (binary type) and based slag cement (ternary type), the combined self-compacting concrete used belite cement type is most stable in the quality control because of high contents for lime stone powder and $C_2S$. It is to propose a control scheme of the combined self-compacting concrete in the actual construction work.