• Steel and Composite Structures
• /
• v.35 no.3
• /
• pp.385-404
• /
• 2020

Since the scaffold is composed of modular members, the total height of multi-story scaffolds does not often meet with the headroom of construction buildings. At this time, other supporting members need to be set up on the top of scaffolds. However, the mechanical behaviors of the combined system of scaffolds and other supporting members have seldom been discussed. This study explores the stability of the combined system of scaffolds and shores. The loading tests conducted in the laboratory show that the critical load of the combined system of two-story scaffolds and wooden shores is about half that of the three-story scaffold system with the same height. In the failure of both the "scaffold system" and the "combined system of scaffolds and shores' after loading, the deformation mainly occurs in the in-plane direction of the scaffold. The outdoor loading test shows that no failure occurs on any members when the combined system fails. Instead, the whole system buckles and then collapses. In addition, the top formwork of the combined system can achieve the effect of lateral support reinforcement with small lateral support forces in the outdoor loading test. This study proposes the preliminary design guidelines for the scaffolding structural design.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2015

A combined treatment system using multiple source water is becoming important as an alternative to conventional water supply for small-scale water systems. In this research, combined water treatment systems were investigated for simultaneous use of multi-source water including rainwater, ground water, river water, and reclaimed wastewater. A laboratory-scale system was developed to systematically compare various combinations of water treatment processes, including sand filtration, microfiltration (MF), granular activated carbon (GAC), and nanofiltration (NF). Results showed that the efficiency of combined water treatment systems was affected by the quality of feed waters. In addition, a simply approach based on the concept of linear combination was suggested to support a decision-making for the optimum water treatment systems with the consideration of final water quality.

• Journal of Information Technology Services
• /
• v.4 no.2
• /
• pp.61-69
• /
• 2005

RFID is used for tracking systems in various business fields these days and these systems brought considerable efficiencies and cost savings to companies. Real-time based information acquired through RFID devices could be a valuable source of information for making decisions if it is combined with decision support tools like OLAP of a data warehouse that has originally been designed for analyzing static and historical data. As an effort of extending the data source of a data warehouse, RFID is combined with a data warehouse in this research. And OLAP is designed to analyze the dynamic real-time based information gathered through RFID devices. The implemented prototype shows that ubiquitous computing technology such as RFID could be a valuable data source for a data warehouse and is very useful for making decisions when it is combined with online analysis. The system architecture of such system is suggested.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.378-382
• /
• 2001

The purpose of this study was to develop an expert system supporting the diagnosis of diffuse interstitial lung disease by high resolution computed tomography. CLIPS(C language integrated production system) with rule-based reasoning was used to develop the system. Development of expert system had three stages knowledge acquisition, knowledge representation, and reasoning. Knowledge was obtained and integrated, from tables and figure legends of a representative textbook in the domain of this expert system, High-Resolution CT of the Lung, by Webb WR, Mueller NL, and Naidich DP. The acquired knowledge was analyzed to form a knowledge base. Overlapping knowledge was eliminated, similar pieces of knowledge were combined and professional terms were defined. The most important knowledge of findings was then selected for each disease. After groupings of combined findings were made, disease groups were analyzed sequentially to determine final diagnoses. The system was based upon the input of 69 diseases, 185 findings, 73 conditions, 387 status, and 62 rules. The system was set up to determine the diagnoses of diseases from the combination of findings using forward reasoning. In an empirical trial, the system was applied to support the diagnosis of 40 cases of diffuse interstitial lung diseases. The performance of two doctors with support of the system was compared to that of another two doctors without support of the system. The two doctors with the support of the system made more accurate diagnoses than the doctors without the support of the system. The system is believed to be useful for the diagnosis of rare diseases and for cases with many possible differential diagnoses. In conclusion, an expert system supporting the high resolution computed tomographic diagnosis of diffuse interstitial lung disease was developed and the system is thought to be useful for medical practice.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.5 s.78
• /
• pp.627-636
• /
• 2005

The analysis and design procedure of intermediate support strut for the innovative prestressed scaffolding (IPS) system was presented in this paper. The stability check of intermediate support strut is required as the behavior of the strut system is similar to that of the built-up column. The computer analysis model of the support strut was constructed for in-plane and out-of-plane buckling analysis, and the design of the support strut was performed. Using the eigenvalue for the buckling load and the member forces of support strut under design earth pressure, the effective buckling length was estimated. The allowable axial and bending stresses were calculated considering the effective buckling length. The combined stresses due to these axial forces and bending moment were estimated to be satisfied the safety condition of the intermediate support strut.

• Child Health Nursing Research
• /
• v.3 no.1
• /
• pp.42-51
• /
• 1997

Although a family-centered approach to health care for developmentally disabled children has been advocated, existing systems of care have not adequately addressed the support needs of the family system and the essential role that parents play in the daily care of these children. The overall purpose of this research is to examine family system adaptation to the care of a developmetally disabled child using the Resiliency Model of Family Stress, Adjustement, and Adaptation Framework. Relationships among family system demands (stressors, strains, transitions, child's illness factors) and family system strengths and capabilities(resource of social support) were examined to determine their separate and combined contribution to explanining the variability in family system outcomes (family system coping ). The subject for this study was 46 families who have a child with developmental disabilities(mental retardation and / or autism) from three special educational programs in Seoul, Korea. Results from correlation and hierachial regression analysis revealed that perceived social support operated as a resiliency factor between family stress and coping. Child and family characteristics appeared to be important predictors of perceived social support and coping. In summary, there is evidence that the resource of social support as a family strength and capability was found to improve the family coping. These findings also must be viewed within the context that sample of families of children with disabilities was relatively small and eligible families from support group of special educational program.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2005.05a
• /
• pp.274-282
• /
• 2005

Customer retention is one of the major issued in life insurance industry, in which competition is increasingly fierce. There are many things to do to retain customers. One of those things is to be continuously in touch with all customers. The objective of this study is to design the contact scheduling system(CSS) to support the planers who must touch the customers without having subjective information. Support-planers suffer from lack of information which can be used to intimately touch. CSS that is developed in this study generates contact schedule to touch customers by taking into account existing contact history. CSS has a two stage process. In the first stage, it segments customers according to his or her demographics and contract status data. Then it finds typical pattern and pattern is combined to business rules for each segment. We expert that CSS would support support-planers to make uncontacted customers' experience positive.

• The Journal of Information Systems
• /
• v.19 no.4
• /
• pp.183-206
• /
• 2010

The technology acceptance model (TAM) is a lot of cited in information technology adoption and usage researches. But TAM has been conducted primarily in volitional environments of the adoption of new technology. This paper discusses technology acceptance in accounting information systems to examine TAM with Characteristics of Organizations and Individuals in mandated using Combined Guard System. Combined Guard System is a scientific guard system that is composed of automated surveillance system, automated sensing system and control system. GOP Scientific Guard System is operated by GOP unit in Korean Army O Division from 2006. In this study, using the extended technology acceptance model, we have analyzed factors which affect the usage intention of GOP Scientific Guard System in mandated using environment. Based upon previous researches, we have selected Support of management unit, Training, Perceived Risk, Subjective Knowledge and Computer Self-efficacy, perceived usefulness, perceived ease of use, and usage intention as variables and proposed a research model. We collected 253 survey questionnaires from Korean army officer and soldier who are serviced at GOP unit in O Division, and analyzed the data using SPSS 12.0 and SmartPLS 2.0M3. According to the results by PLS analysis, According to the results by PLS analysis, Training and Subjective Knowledge did not affect Perceived usefulness, but the other hypotheses were accepted. And Perceived usefulness, and Ease of use influenced the Usage intention. The results of this study will increase Characteristics of Organizations and Individuals on GOP Scientific Guard System and eventually contribute to establishing the activation of Combined Guard System.

• Geomechanics and Engineering
• /
• v.11 no.3
• /
• pp.401-420
• /
• 2016

The stability of deep coal roadways with large sections and thick top coal is a typical challenge in many coal mines in China. The innovative Universal Discrete Element Code (UDEC) trigon block is adopted to create a numerical model based on a case study at the Dongtan coal mine in China to better understand the failure mechanism and stability control mechanism of this kind of roadway. The failure process of an unsupported roadway is simulated, and the results suggest that the deformation of the roof is more serious than that of the sides and floor, especially in the center of the roof. The radial stress that is released is more intense than the tangential stress, while a large zone of relaxation appears around the roadway. The failure process begins from partial failure at roadway corners, and then propagates deeper into the roof and sides, finally resulting in large deformation in the roadway. A combined support system is proposed to support roadways based on an analysis of the simulation results. The numerical simulation and field monitoring suggest that the availability of this support method is feasible both in theory and practice, which can provide helpful references for research on the failure mechanisms and scientific support designing of engineering in deep coal mines.

• Journal of Information Processing Systems
• /
• v.12 no.1
• /
• pp.109-128
• /
• 2016

This paper presents a new combined forecasting method that is guided by the soft set theory (CFBSS) to predict business failures with different sample sizes. The proposed method combines both qualitative analysis and quantitative analysis to improve forecasting performance. We considered an expert system (ES), logistic regression (LR), and support vector machine (SVM) as forecasting components whose weights are determined by the receiver operating characteristic (ROC) curve. The proposed procedure was applied to real data sets from Chinese listed firms. For performance comparison, single ES, LR, and SVM methods, the combined forecasting method based on equal weights (CFBEWs), the combined forecasting method based on neural networks (CFBNNs), and the combined forecasting method based on rough sets and the D-S theory (CFBRSDS) were also included in the empirical experiment. CFBSS obtains the highest forecasting accuracy and the second-best forecasting stability. The empirical results demonstrate the superior forecasting performance of our method in terms of accuracy and stability.