• 유체기계공업학회:학술대회논문집
• /
• 1998.12a
• /
• pp.198-208
• /
• 1998

For the development of a gas turbine engine, repetitive calculation process to determine design point and off-design performance based on basic design requirements resulted from the market survey is necessary Due attention then, must be given that design process must be carried out within the mechanical limits satisfying conservation laws of mass, work as well as speed equilibrium between the components for maximum performance. It is the purpose of the present study to deal with technical particulars during design point and off-design process of gas turbine engine performance analysis for simple cycle as well as combined cycle.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.645-650
• /
• 2007

This paper proposes a parameter estimation technique of a power transformer. Based on the combined equation, it estimates separately the primary and secondary leakage inductances using the least square method from the instantaneous voltages and currents in the steady state. The performance of the proposed technique was investigated by varying the cut-off frequency of the filter and the number of samples per cycle. The estimated values are obtained based on the average value for 41 cycle.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.183-185
• /
• 2005

This paper discusses an economic study analysis of captive power plant as a commercial plant in the cost based pool market. In this paper I assumed the conversion of a captive power plant owned by factories to a commercial plant and investigated the changes in profitability associated with this. I set the total electricity expense of a captive purpose plant as state A and the costs associated with converting to a commercial purpose plant as state B. Each state subdivided by case which is classified its plant variable cost, type of generation (combined cycle, single cycle) and type of power contract received. After set model for each case, different economic benefits by each case can be calculated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.385-389
• /
• 2009

This paper deals with the enhancement of the complex potential navigation for wheeled mobile robots. The circle theorem from complex function theory is used to avoid an obstacle, and the enhancement to avoid multiple obstacles is proposed. The limit cycle navigation can be combined for robot to kick the ball to the intentioned direction. Avoiding step and superposing twin vortices can be applied to adjust the direction of robot's trajectory. The proposed method is verified through a set of simulation works, and the feasibilities for the enhancement of complex potential theory are successful.

• Animal cells and systems
• /
• v.11 no.2
• /
• pp.191-198
• /
• 2007

The ultrastructure of germ cells and follicle cells during oogenesis, oocyte degeneration, reproductive cycle, and first sexual maturity in female Cyclina sinensis were investigated for clams collected from Simpo, Jeollabuk-do, Korea, by cytological and histological observations. Vitellogenesis occured by way of endogeous autosynthesis and exogenous heterosynthesis: vitellogensis occurred through a process of autosynthesis, which involves a combined activities of the Golgi complex, mitochondria, and rough endoplasmic reticulum. The process of heterosynthesis involved endocytotic incorporation of extraovarian precursors into the basal region of the early vitellogenic oocytes prior to the formation of vitelline envelope. The follicle cells appear to play an integral role in vitellogenesis and oocyte degeneration, functioning in phagocytosis and digestion of products originating from the degenerated oocytes: these functions can permit the transfer of yolk precursors needed for vitellogenesis. Follicle cells might have a lysosomal system for breakdown and might also resorb phagosomes in the cytoplasm for nutrient storage during oocyte degeneration.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.2
• /
• pp.41-46
• /
• 2011

This study investigated the changes in performance and operating characteristics of an F-class gas turbine according to the change of working fluid from air to carbon dioxide. The revised gas turbine is the topping cycle of the semi-closed oxy-fuel combustion combined cycle. With the same turbine inlet temperature, the $CO_2$ gas turbine is expected to produce about 85% more power. The main contributor is the greater compressor mass flow and the added oxygen flow for the combustion. Compressor pressure ratio increases about 50%. However, the gas turbine efficiency reduces about 10 %. Modulation of inlet guide vane to reduce the compressor inlet mass flow, the major purpose of which is to reduce the compressor inlet Mach number, was also performed.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.86-87
• /
• 2005

The combustion characteristics of the D.I. diesel engine are largely dependent on the air-fuel ratio and the gas exchange process. The main factors are the shape of combustion chamber, fuel injection system, air flow inside the cylinder, intake air mass flow rate and so forth. Because these factors affect the combustion in a mutual and combined manner, it is very important to clearly understand the correlation of these factors in order to provide the combustion improvement plans. In this paper, we studied the performance and the gas exchange process of marine four-stroke engine using the engine cycle simulation. Also, we predicted briefly turbocharger engine matching.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.05a
• /
• pp.120-125
• /
• 1993

석탄가스화 복합사이클 발전시스템에서 스팀터빈 발전시스템은 1차 사이클인 가스터빈사이클에서 나오는 폐열을 이용하여 발생하는 증기로 구동되며, 증기의 일부는 가스화기로 들어가서 가스화 반응에 이용된다. 이와 같은 시스템의 설계나 평가를 위해서는, 주어진 시스템에 대한 열 및 물질수지 정산을 구할 수 있는 능력을 갖추는 것이 필요하다. 본 연구에서는 주어진 시스템의 성능을 평가할 수 있는 프로그램을 개발하여 IGCC(Integrated Gasification Combined Cycle)System의 증기터빈 사이클과 유사한 증기터빈기계의 열 및 물질정사고 성능 해석에 적용하였다. (중략)

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.13 no.2
• /
• pp.67-74
• /
• 2017

Recently there have been many concerns on structural integrity of nuclear piping under seismic loadings. In terms of failure of nuclear piping due to seismic loadings, an important failure mechanism is low cycle fatigue with large cyclic displacements. To investigate the effects of seismic loading on low cycle fatigue behavior of nuclear piping, the cyclic behavior of materials and nuclear piping needs to be accurately estimated. In this paper, the non-linear finite element (FE) analyses have been carried out to evaluate the effects of three different cyclic hardening models on cyclic behavior of materials and nuclear piping, such as isotropic hardening, kinematic hardening and combined hardening.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.779-783
• /
• 2004

First this paper introduces an advanced FADEC (Full Authority Digital Electric Control) for current and future jet engines.It is designed to realize not only stable thrust control, but also performance improvement, reliability enhancement, service life extension, etc. It can be built by using current micro-processor with high computational power and there exists no difficulties but reliability problem of the micro- processor. Next, the simulation results of SFC minimization control are shown. The target engine is a supersonic, low-bypass ratio, 2-spool, combined cycle turbofan, designated as HYPR90T, which consists of a turbo engine for under Mach 3 flight and a ram engine for over Mach 3 flight. he results can then be used for performance optimization of the engine, which plays important role in the advanced FADEC.