• Geomechanics and Engineering
• /
• 제28권3호
• /
• pp.283-298
• /
• 2022

Landslides triggered by the combination of heavy precipitation and anthropological disturbance in hilly areas cause severe damage to human lives, properties, and infrastructure constructions. A comprehensive investigation of the influencing factors and failure mechanisms of landslides are significant for disaster mitigation and prevention. This paper utilized the combination of detailed geological investigation, physical experimental testing as well as numerical modelling to determine the failure mechanism, and proposed a countermeasures of the Lantian landslide occurred on 2, July 2017. The results reveal that the Lantian landslide is a catastrophic reactivated slide which occurred in an active tectonic region in Southwest China. Because of the unique geological settings, the fully to highly weathered basalts in the study area with well-developed fractures favored the rainwater infiltration, which is the beneficial to slide reactivation. Engineering excavation and heavy precipitation are the main triggering factors to activate the slide motion. Two failure stages have been identified in the landslide. The first phase involves a shallow mass collapse originated at the upper slopes, which extends from the road to platform at rear part, which is triggered by excavation in the landslide region. Subjected to the following prolonged rainfall from 19 June to 2 July, 2017, the pore water pressure of the slope continually increased, and the groundwater table successively rise, resulting in a significant decrease of soil strength which leads to successive large-scale deep slide. Thereinto, the shallow collapse played a significant role in the formation of the deep slide. Based on the formation mechanisms of the landslide, detailed engineering mitigation measures, involving slope cutting, anchor cable frame, shotcrete and anchorage, retaining wall and intercepting ditch were suggested to reduce the future failure risk of the landslide.

• 환경생물
• /
• 제39권4호
• /
• pp.423-434
• /
• 2021

Two new free-living marine nematodes of the genus Belbolla Andrássy, 1973 belonging to family Enchelidiidae are newly described based on specimens obtained from a shallow subtidal sediment of the western and southern outermost islands of Korea. Belbolla koreensis sp. nov. differs from other species of the genus by the combination of the following characteristics: longer body length (3,080-3,462 ㎛ long), eight oesophageal bulbs in the posterior region of pharynx, well-developed two winged precloacal supplements (anterior precloacal supplement slightly longer than posterior one: 47-59 ㎛ vs. 43-46 ㎛ long), strongly arcuated, very thick, L-shaped spicule (122-127 ㎛ long, 1.7-1.9 anal body diameter(a.b.d.) long) with three separated blunt distal tips, and well-developed relatively long cylindrical shaped gubernacular apophysis with blunt teeth covering two thirds of the dorsal margin (57-58 ㎛ long, 0.8-0.9 a.b.d. long). Belbolla hoonsooi sp. nov. is characterized by the following combination of characteristics: longer body length (3,494 ㎛ long), eight oesophageal bulbs in the posterior region of pharynx, well-developed two winged precloacal supplements (anterior precloacal supplement slightly longer than posterior one: 43 ㎛ vs. 36 ㎛ long), strongly arcuated, L-shaped spicule (119 ㎛ long, 1.5 a.b.d. long) with three separated blunt distal tip, and well-developed relatively long inverted triangle shaped gubernacular apophysis with blunt teeth covering half of the dorsal margin (45 ㎛ long, 0.6 a.b.d. long). Detailed morphological characteristics and illustrations of two new Belbolla nematodes from the Korean seawaters were provided by differential interference contrast microscopy. Comparative tables on biogeographical and morphological characteristics of Belbolla species are also provided herein.

• 한국지형학회지
• /
• 제27권2호
• /
• pp.1-17
• /
• 2020

This study evaluated a debris landform distribution potential area map in the southwest region of the Korean peninsula. A GIS spatial integration technique and logistic regression method were used to produce a distribution potential area map. Seven topographic and environmental factors were considered for analysis and 28 different data set were combined and used to get most effective results. Moreover, in an accuracy assessment, the extracted results of the Distribution Potential area were evaluated by conducting a cross-validation module. Block stream showed the highest accuracy in the combination No. 6, and that DEM (digital elevation model) and TWI (topographic wetness index) have relatively high influences on the production of the Block stream Distribution Potential area map. Talus showed the highest accuracy in the combination No. 13. We also found that slope, TWI and geology have relatively high influences on the production of the Talus Distribution Potential area map. In addition, fieldwork confirmed the accuracy of the input data that were used in this study, and the slope and geology were also similar. It was also determined that these input data were relatively accurate. In the case of angularity, the block stream was composed of sub-rounded and sub-angular systems and Talus showed differences according to the terrain formation. Although the results of the rebound strain measurement using a Schmidt's hammer did not shown any difference in topographic conditions, it is determined that the rebound strain results reflected the underlying geological setting.

• 대한기계학회논문집A
• /
• 제38권8호
• /
• pp.857-862
• /
• 2014

하드페이싱층과 기저부의 결합부에서 발생하는 잔류 응력/변형률을 감소시키기 위하여 열응력제어층에 대한 연구가 시작되고 있다. 이 연구에서는 3 차원 유한요소해석을 이용하여 Stellite21 초합금으로 하드페이싱된 STD61 열간금형강의 중간층으로 형성된 열응력제어층의 재료조합과 두께를 예측하고자 한다. 열응력제어층은 Stellite21 과 STD61 의 조합으로 생성하였다. 열응력제어층의 두께범위는 0.5-1.5 mm 로 선정하였다. 유한요소해석 결과를 이용하여 열응력제어층을 구성하는 Stellite21과 STD61의 혼합율 및 열응력제어층 두께에 따른 시편 내부 온도/열응력/열변형률분포를 정량적으로 분석하였다. 이 결과로부터 적합한 열응력제어층의 재료혼합비는 Stellite21 50 % 와 STD61 50 % 이며, 적절한 열응력제 어층의 두께는 1.0 mm 임을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.553-558
• /
• 2001

To find the effective combinations of blowing ratio and injection angle for a straight slot film cooling, film cooling characteristics was investigated using both flow visualization experiment and numerical simulation. Injection angles from $15^{\circ}\;to\;50^{\circ}$ and blowing ratios from 0.2 to 3.0 were selected for the simulation. Comparison between experimental and numerical results shows a good agreement, for the case of the injection angle of $30^{\circ}$ and blowing ratio ranging from 0.55 to 2.0. Film cooling effectiveness was found to be an increasing function of blowing ratio. The effects of injection angle became prominent as the blowing ratio increases. An interesting phenomenon was found for the injection angle of $15^{\circ}$ : the lowest film cooling effectiveness for the blowing ratio smaller than 1.0, but the highest film cooling effectiveness for the blowing ratio greater than 2.0 within wide range of downstream region. There exist optimum injection angles corresponding to maximum film cooling effectiveness : injection angle of $25^{\circ}$ for the blowing ratio from 0.2 to 2.0, and injection angle of $15^{\circ}$ for the blowing ratio of 3.0. Present study provides a design combination among film cooling effectiveness, blowing ratio, and injection angle.

• 한국작물학회지
• /
• 제45권2호
• /
• pp.73-78
• /
• 2000

This study was conducted for 2 years at Chinju region to establish suitable seeding rate and fertilizing levels of nitrogen, phosphorous and potassium in spring-sown Jinyangbori. Heading and maturing were delayed by increasing fertilizers, especially nitrogen. Number of spikes per were secured by much seeding and increased application of nitrogen. One thousand grain weight reduced with increasing fertilization at any seeding rate. Relatively high harvest indices were observed with 12-10-4 at 10kg. 10a$^{-l}$ seeds planted, followed by 6-10-8 at 15 kgㆍ 10a$^{-1}$, and 6-10-4kgㆍ 10a$^{-l}$ at 20kg ㆍ 10a$^{-l}$ of N-P-K fertilizing combinations, respectively. There was no distinct differences on yield for various seeding rates in spring-sown barley. When seeding rate increased up to 15kgㆍ10a$^{-1}$, the positive effect of fertilizers was recognized as the function of balanced-application. It was possible to recommend 10kgㆍ10a$^{-1}$ as seeding rate and 6-5-4(N-P-K)kgㆍ10a$^{-1}$ as fertilizing combination in spring-time seeding considering low input and sustainable agriculture. There was no significant difference of protein content in grain by seeding rate. Increase of nitrogen fertilizer enhanced protein content in grain.

• 한국멀티미디어학회논문지
• /
• 제6권7호
• /
• pp.1302-1311
• /
• 2003

본 논문에서는 삼각 메쉬에 관한 보다 안정되고 직관적인 새로운 다중해상도 메쉬 편집 기술을 제안한다. 본 논문의 기본 아이디어는 3차원 메쉬 상에서 편집 영역을 선택하여 2차원 영역으로 임베딩을 하는 과정과 사용자에 의해서 정의되는 편집 정보를 보간하는 곡면을 생성하는 과정으로 이루어지며, 이를 통해 편집 영역 안에 있는 다른 꼭지점의 변위 정보를 곡면 함수값으로부터 생성한다. 본 논문에서 사용되는 임베딩 방법은 확장 볼록 조합 매개변수화 방법으로서 임베딩된 2차원 메쉬의 삼각형들은 자기 교차를 하지 않으며 또한 볼록 조합 계수를 정의할 때 모양 유지 방법을 사용하기 때문에 3차원 삼각형의 모양을 제대로 유지할 수 있다. 또한 편집 결과의 영역을 조절할 수 있도록 하기 위하여 다단계 B-스플라인 곡면을 이용하여, 상호작용적이며 직관적이어서 보다 안정되고 효율적인 메쉬 편집 결과를 얻을 수 있다.

• The Korean Journal of Pain
• /
• 제13권1호
• /
• pp.105-110
• /
• 2000

Central neuropathic pain may occur in 10~20% of the patients after spinal cord injury. The central pain syndrome include spontaneous continuing and intermittent pain as well as evoked pain. The pain is evoked by non-noxious stimulation of the region (allodynia) and repeated stimulation (wind-up phenomenon). Four patients were referred suffering from severe pain, allodynia and hyperaesthesia after spinal cord injury. They had received conventional treatment with non-steroidal anti-inflammatory drugs, steroid, anticonvulsant, antidepressant and rehabilitation which failed to provide pain relief. We administered combination of low doses of morphine and ketamine (10 mg) through the epidural catheter with other conventional therapy. Satisfactory pain relief was achieved in each patient. The reduction of pain was not associated with severe side effects. The most bothersome side effect of ketamine was dizziness in one patient, only caused by bolus injection (ketamine 10 mg with normal saline 10 ml). This suggests synergy from this combination that provides an alternative treatment for central pain.

• 대한한의진단학회지
• /
• 제18권2호
• /
• pp.111-120
• /
• 2014

Objectives In order to extend the bounds of korean medical instruments, we studied on the clinical application of BUDDEUM (the remedy of the synchronus combination of cupping boil and moxibustion) by the industry-academic cooperation. Methods The korean clinic, enterprise and university participated in jointly an educational-industrial complex. We studied on the clinical application of BUDDEUMI according to the structural character, functional efficiency and clinical case. And therefore we confirmed clinically the application of BUDDEUMI. Results The results was as follows. 1. The effects of BUDDEUMI are observed on the detoxification of blood waste material, & the form and appearance of effete matter are various. 2. The BUDDEUMI massage treatment operated in the abdominal and the back in order to recover energy and increase immunity. 3. The heating treatment by BUDDEUMI operated in sickly region, in order to pour into heat of moxibustion. Conclusion According to the results, by the set up the exclusive therapy room and the arrange of the exclusive human agency of BUDDEUMI, the newly and various therapies of korean medicine are possible to develop.

• The Journal of Korean Physical Therapy
• /
• 제6권1호
• /
• pp.133-145
• /
• 1994

The purpose of this study were 1) to describe the rolling movements of the twenties, 2) to identify developmental sequences of three body regions and 3) to evaluate the influence gender might have on the movement patterns used for rolling. Fifty males(mean 23.2 years of age) and fifty females(mean 21.1 years of age) performed the 10 trials of rolling from a supine to a prone position while being videotaped. Individual videotaped trials were classified using the described categories for upper extremity, lower extremity and head-trunk component. The most common combination of movement patterns described. The results of this study were as follows : 1. Only $16\%$ of males and $12\%$ of females demonstrated a same combination of movements during rolling. 2. Gender differences were found in the incidence of movement patterns of each body region. 3. This study determined if head-trunk anion might develop in advance of limb action. 4. This study determined if upper extremity action might develop in advance of lower extremity action. The variability of adults' rolling movement provides physical therapists with numeous movement combinations that might be used when teaching patterns to rolling.