Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Estimation of the Thickness and the Material Combination of the Thermal Stress Control Layer (TSCL) for the Stellite21 Hardfaced STD61 Hot Working Tool Steel Using Three-Dimensional Finite Element Analysis

3 차원 유한요소해석을 이용한 Stellite21 초합금으로 하드페이싱된 STD 61 열간금형강의 열응력제어층 재료조합 및 두께 예측

  • Park, Na-Ra (Dept. of Mechanical Engineering, Chosun Univ.) ;
  • Ahn, Dong-Gyu (Dept. of Mechanical Engineering, Chosun Univ.) ;
  • Oh, Jin-Woo (Dept. of Mechanical Engineering, Chosun Univ.)
  • Received : 2014.04.01
  • Accepted : 2014.05.07
  • Published : 2014.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

The research on a thermal stress control layer (TSCL) begins to undertake to reduce residual stress and strain in the vicinity of the joined region between the hardfacing layer and the base part. The goal of this paper is to estimate the material combination and the thickness of TSCL for the Stellite21 hardfaced STD61 hot working tool steel via three-dimensional finite element analysis (FEA). TSCL is created by the combination of Stellite21 and STD61. The thickness of TSCL ranges from 0.5 mm to 1.5 mm. The influence of the material combination and the thickness of TSCL on temperature, thermal stress and thermal strain distributions of the hardfaced part have been investigated. The results of the investigation have been revealed that a proper material combination of TSCL is Stellite21 of 50 % and STD61 of 50 %, and its appropriate thickness is 1.0 mm.

하드페이싱층과 기저부의 결합부에서 발생하는 잔류 응력/변형률을 감소시키기 위하여 열응력제어층에 대한 연구가 시작되고 있다. 이 연구에서는 3 차원 유한요소해석을 이용하여 Stellite21 초합금으로 하드페이싱된 STD61 열간금형강의 중간층으로 형성된 열응력제어층의 재료조합과 두께를 예측하고자 한다. 열응력제어층은 Stellite21 과 STD61 의 조합으로 생성하였다. 열응력제어층의 두께범위는 0.5-1.5 mm 로 선정하였다. 유한요소해석 결과를 이용하여 열응력제어층을 구성하는 Stellite21과 STD61의 혼합율 및 열응력제어층 두께에 따른 시편 내부 온도/열응력/열변형률분포를 정량적으로 분석하였다. 이 결과로부터 적합한 열응력제어층의 재료혼합비는 Stellite21 50 % 와 STD61 50 % 이며, 적절한 열응력제 어층의 두께는 1.0 mm 임을 알 수 있었다.

Keywords

References

  1. Ahn, D. G., 2013, "Hardfacing Technologies for Improvement of Wear Characteristics of Hot Working Tools: A Review," International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 7, pp. 1271-1283. https://doi.org/10.1007/s12541-013-0174-z
  2. Ahn, D. G., 2011, "Applications of laser assisted metal rapid tooling process to manufacture of molding & forming tools - state of the art," International Journal of Precision Engineering and Manufacturing, Vol. 12, No. 5, pp. 925-938. https://doi.org/10.1007/s12541-011-0125-5
  3. Smurov, I., 2008, "Laser Cladding and Laser Assisted Direct Manufacturing," Surface and Coating Technology, Vol. 202, No. 18, pp. 4496-4502. https://doi.org/10.1016/j.surfcoat.2008.04.033
  4. Ocylok, S., Weisheit, A. and Kelbassa, I., 2010, "Functionally Graded Multi-layers by Laser Cladding for Increased Wear and Corrosion Protection," Physics Procedia, Vol. 5, Part A, pp. 359-367. https://doi.org/10.1016/j.phpro.2010.08.157
  5. Muller, S., Pries, H., Dilger, K., Ocylok, S., Weisheit, A., and Kelbassa, I., 2011, "Applying Functionally Graded Materials by Laser Cladding: a Cost-effective Way to Improve the Lifetime of Die-casting Die," Globalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, pp. 235-239.
  6. Jeong, J. S. and Shin, K. H, 2013, "Fabrication of Functionally Graded Materials between P21 Tool Steel and Cu by Using Laser-Aided Layered Manufacturing," Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 1, pp. 61-66. https://doi.org/10.3795/KSME-A.2013.37.1.061
  7. Jang, S. P. and Choi, S. U. S., 2007, "Effects of Various Parameters on Nanofluid Thermal Conductivity," Trans. AMSE Journal of Heat Transfer, Vol. 129, Issue 5, pp. 617-623. https://doi.org/10.1115/1.2712475
  8. Jang, S. P. and Choi, S. U. S., 2004, "Role of Brownian Motion in the Enhanced Thermal Conductivity of Nanofluids," Applied Physics Letters, Vol. 84, Issue 21, pp. 4,316-4,318. https://doi.org/10.1063/1.1756684

Cited by

  1. A study on the Effects of Geometrical Parameters of Overlay Coated Layer on the Thermal Stress-strain Distributions of Co-based Super-alloy Deposited Layer on Hot-working Tool Steel vol.40, pp.2261-236X, 2016, https://doi.org/10.1051/matecconf/20164001003
  2. Design of overlay coated region with hardfacing, transition and damage diminution layers for the reduction of damages of hot forging tools vol.31, pp.12, 2017, https://doi.org/10.1007/s12206-017-1104-2
  3. Design of thermal stress control layers in the selective deposition technology of hot axle forging dies vol.18, pp.12, 2017, https://doi.org/10.1007/s12541-017-0209-y