• 설비공학논문집
• /
• 제9권4호
• /
• pp.552-560
• /
• 1997

Analysis is performed to determine the optimal lengths or cross-sectional areas of refrigerator-cooled current leads that can be applied to the conduction-cooled superconducting systems. The binary current lead is composed of the series combination of a normal metal at the upper(warm) part and a high $T_c$ superconductor(HTS) at the lower(cold) part. The heat conduction toward the cold end of HTS part constitutes a major refrigeration load. In addition, the joint between the parts should be cooled by a refrigerator in order to reduce the load at the low end and maintain the HTS part in a superconducting state. The sum of the work inputs required for the two refrigeration loads needs to be minimized for an optimal operation. In this design, three simple models that depict the refrigeration performance as functions of cooling temperature are developed based on some of the existing refrigerators. By solving one-dimensional conduction equation that take into account the temperature-dependent properties of the materials, the refrigeration works are numerically calculated for various values of the joint temperature and the sizes of two parts. The results show that for given size of HTS, there exist the optimal values for the joint temperature and the size of the normal metal. It is also found that the refrigeration work decreases as the length of HTS increases and that the optimal size of normal metal is quite independent of the size of HTS. For a given length of HTS, there is an optimal cross-sectional area and it increases as the length increases. The dependence of the optimal sizes on the refrigerator models employed are presented for 1kA leads.

• 한국의류학회지
• /
• 제25권4호
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• 한국실내디자인학회논문집
• /
• 제21권5호
• /
• pp.85-97
• /
• 2012

This study is aimed to identify the color characteristics of the current Korean Brand Apartment, focused on the color of kitchens and dining rooms in the cyber model houses. The Brands which were selected for this study ranked from first to fifth in the contractor ranking and now account for 64 percent of the apartments in sale in Seoul and Gyeonggi Province. In addition, the size between $99m^2$ and $165m^2$ were selected, because it was most preferred at the 2011 survey for user preference on the size of apartment. As this study is for the colors shown on the monintor, colors were extracted from the images of web site with L*, a*, b*. And then, they were converted to Munsell values through computer program, which values were used to identify the color characteristics of hue, tone and to apply the theory of Moon Spencer. The result of the study on the color characteristics of the kitchen and dining room of the five brands' apartments is as follows. Regarding the color use, most of the brands used Y and YR color while as the accent color, P, PB and G were used. This result of main color use for hue was same as the guideline by the literature review, but color for tone showed the difference between brands and the difference between sizes. Next, regarding the color combination, first ambiguity of color harmony was shown the most. And the larger the size was, the more the contrast of color harmony was shown. It means that the color tone had close relation with the sizes of households.

• 대한기계학회논문집A
• /
• 제34권3호
• /
• pp.299-305
• /
• 2010

가변성형 공정에서 동일한 크기의 성형펀치 배열로 구성된 가변금형을 이용하는 경우 펀치의 크기가 일정하여 성형 가능한 곡률 반경이 제한되기 때문에 비교적 유연성이 낮다. 이에 본 연구에서는 가변금형의 유연성을 높이기 위하여 분할가변금형에 대한 개념을 제안하였다. 임의의 성형면을 형성하기 위하여 두 가지 크기의 펀치로 구성된 펀치 블록을 착안하였다. 상대적으로 큰 곡률 반경을 갖는 성형영역에 대해서는 크기가 큰 펀치 블록을 적용하였으며, 작은 곡률 반경을 갖는 성형영역에 대해서는 작은 크기의 펀치로 구성된 펀치 블록을 적용하였다. 해석적 연구를 토대로 성형된 제품의 단면 형상을 비교하였으며 이로부터 서로 다른 크기의 펀치 블록을 조합하여 구성한 분할가변금형을 이용한 판재의 성형공정이 비교적 복잡한 곡률 반경 분포를 갖는 곡면 가공에 적합함을 확인하였다.

• 복식문화연구
• /
• 제20권2호
• /
• pp.184-194
• /
• 2012

The purpose of this study is twofold: it suggests appropriate sizes in menswear slim-fit jackets according to brand zones and number of buttons, as well as jacket patternmaking methods according to jacket styles by surveying and comparing the overall present status of patternmaking and production for both men's slim-fit and classic-fit jackets. The researcher conducted interviews with patternmakers of sixteen brands with prepared questionnaires. Data were analyzed by descriptive statistics using SPSS 12.0. The results of this study are as follows: first, for the production ratios of jacket style, the jacket styles' respective proportions differ distinctly according to brand zone. Second, for a jacket with the same number of buttons according to brand zone, the size in character-casual brand zone (character casual can be defined as high quality brands producing designer style clothes) is slightly bigger than the men's formal suit. As the number of buttons increases, there are increases in the chest, waist and hip circumference; on the other hand, the front neck width and the distance from the shoulder neck point to the bottom of the lapel both decrease. Furthermore, the amount of wearing ease in the chest, waist, upper arm circumference, and sleeve curve is less in slim-fit jacket styles than in classic-fit jacket styles. Fusible interfacing alone is used in slim-fit jackets, while sew-in interfacing is used in combination with fusible interfacing in classic-fit jackets. This research concludes that when slim-fit men's jackets are manufactured, appropriate patternmaking and manufacturing methods should be considered.

• 복식
• /
• 제64권2호
• /
• pp.70-83
• /
• 2014

This study was done to provide the basic data for improving the sizing system for infants and children's clothing. The 97 brands were surveyed through market research and on-line searching. Size and body measurements were analyzed according to the content of nominal size, type of market, national and foreign brands, and meaning of reference size. The results are as follows: 1. The meaning of nominal sizes was categorized as five cases: the size based on body measurements, the size based on age, the meaningless size, letter cord and combination of 2 out of 4 cases above. The nominal size based on height was most observed, and the meaningless nominal size was second. The meaningless nominal size can cause confusion when consumer buys clothing. 2. The department stores mainly used the nominal size based on body measurements, but the Internet shopping malls largely used the meaningless nominal size. 3. Both national brands and foreign brands mainly used the nominal size based on height. But national brands largely used the different nominal sizes. 4. 41 brands indicated body measurements as reference size and 26 brands indicated product measurements as reference size. Therefore consumers tended to confuse the body measurements with the product measurement.

• 정보과학회 논문지
• /
• 제44권2호
• /
• pp.208-212
• /
• 2017

플래시 SSD는 기존 하드디스크에 비해 높은 에너지 효율성, 외부 충격에 강한 내구성, 높은 입출력 처리량 등 여러 장점을 지니고 있다. 따라서 3D-NAND 및 V-NAND 등 단위 용량 당 비용을 획기적으로 개선하는 최신 기술의 등장과 맞물려서, 플래시 SSD가 많은 영역에서 하드디스크를 급격하게 대체하고 있다. 하지만, 주로 하드디스크를 가정하고 개발된 기존 데이터베이스 엔진은 플래시 SSD의 특성 (예를 들어, 내부 병렬성)을 제대로 활용하지 못하고 있다. 본 논문에서는, 더 빠른 질의 처리를 위해 플래시 SSD에 내재한 내부 병렬성을 활용하는 방법으로, MySQL InnoDB엔진에서 보조 인덱스(Secondary Index)를 이용한 스캔을 위해 비 동기적 입출력을 활용한 Prefetch 기능을 구현하였다. Prefetching을 사용한 스캔 기법은, 기존 InnoDB엔진의 보조 인덱스 스캔과 비교해서, 데이터 페이지 크기가 16KB일 경우, 약 3배 이상, 데이터 페이지 크기가 4KB일 경우, 약 4.2배 이상 성능 향상을 보인다.

• 대한한방부인과학회지
• /
• 제33권2호
• /
• pp.29-43
• /
• 2020

Objectives: The purpose of this study is to review and evaluate the effectiveness of oriental medicine per oral for recurrent vulvovaginal candidiasis (RVVC). Methods: We searched articles from Korean journal databases including Journal of Korean Obstetrics and Gynecology, Korean studies Information Service Studies, and Chinese National Knowledge Infrastructure, Cochrane Library, PubMed. Searched keywords were "재발성 칸디다성 외음질염", "recurrent vulvovaginal candidiasis", "㚆发性外阴阴道假丝酵母菌病", "中藥". Results: 10 randomized controlled trials with 700 patients were identified and reviewed. 8 studies compared combination of oriental medicine and anti-fungal agent with anti-fungal agent, and 6 of them reported that treatment group (TG) showed statistically higher total effective rate or cure rate and lower recurrence rate. One study compared oriental medicine and anti-fungal agent and TG showed statistically higher total effective rate and lower recurrence rate after 1 month. One study compared combination of oriental medicine and lacto bacillus capsule with lacto bacillus capsule, and TG showed statistically higher total effective rate and lower positive fungul test rate after 6 months. No severe adverse response was reported. Conclusions: Our review found that oriental medicine per oral is effective for alleviating symptoms, lowering recurrence rate and positive fungal test in RVVC patients. We recommend standardized randomized controlled trial guideline should be made to obtain stronger evidence and well designed trials with larger sample sizes are needed.

• 대한인간공학회지
• /
• 제36권3호
• /
• pp.213-219
• /
• 2017

Objective: The present study identified the minimum legible text size by an experiment for eight combinations of background and text colors, which will be used in designing visual information on group-view display (GVD). Background: Information on minimum legible text size is needed to design the visual information presented on GVD in a radioactive waste control room. Method: The experiment was conducted for 22 male participants (age: mean = 37, SD = 6.7; visual acuity: over 0.8) who were recruited by considering demographic characteristics of current control room operators. Eight combinations of background and text colors were considered and the minimum legible text size was determined for each combination by applying the method of limits, one of psychophysical methods. Results: The minimum legible text size was significantly different in accordance with the combination of background and text colors. Statistical analysis results showed that luminance contrast and color contrast between background and text influenced the minimum legible text sizes. Conclusion: This study concluded that the minimum legible text size is 8 minute of arc for various combinations of background and text colors. Application: The minimum legible text size identified in the present study can be utilized in designing visual information on GVD at the main control room in a radioactive waste facility.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권8호
• /
• pp.1127-1136
• /
• 2013

Four rumen-fistulated crossbred beef cattle (Brahman native) were randomly assigned according to a $4{\times}4$ Latin square design experiment to be fed plant herb supplements in their concentrate mixture. The treatments were: without herb supplementation (Control), lemongrass meal supplementation at 100 g/d (L), lemongrass meal supplementation at 100 g/d plus peppermint powder at 10 g/d (LP), and lemongrass meal supplementation at 100 g/d plus peppermint powder at 10 g/d with garlic powder 40 g/d (LPG), respectively. Based on the present study, the DMI and apparent digestibility of DM, OM, aNDF and ADF were not affected by dietary herb supplementation while CP digestibility tended to be decreased by herb supplement. Moreover, $NH_3$-N and BUN were decreased in all herb supplemented treatments and there was a tendency to an increase in ruminal pH in all herb supplemented groups. While there was no change in TVFA and C4 among lemongrass treatments, C2 was decreased in all herb supplemented treatments while C3 was increased. Methane production by calculation was the lowest in the LP and LPG groups. Population sizes of bacteria and protozoa were decreased in all herb supplemented groups, but not fungal zoospores. In all supplemented groups, total viable and proteolytic bacteria were decreased, while amylolytic and cellulolytic bacteria were similar. More importantly, in all herb supplemented groups, there were higher N balances, while there was no difference among treatments on purine derivative (PD) excretion or microbial N. Based on the results above, it could be concluded that there was no negative effect on ruminal fermentation characteristics and nutrient utilization by plant herb supplement, but protozoal population and $CH_4$ production were reduced. Thus, lemongrass alone or in combination with peppermint and garlic powder could be used as feed additives to improve rumen fermentation efficiency.