• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.461-466
• /
• 2002

Fiber-optic comb filters using a side-polished fiber coupler are proposed as multi-channel isolation filters on wavelength division multiplexing systems. We have demonstrated that the coupling efficiency between two waveguides is improved by the intermediate coupling layer in spite of the decrease of the optical power transfer between two waveguides due to the high-order modes of the overlay waveguide coupled with the side-polished single-mode fiber. When LiNbO$_3$with a 200-${\mu}{\textrm}{m}$-thickness was applied as a planar-overlay-waveguide, the comb filtering characteristics with a 4 nm-channel-spacing were achieved and the maximum power coupling occurred at the 1-${\mu}{\textrm}{m}$-thickness and the refractive index in range 1.52 to 1.53 of an intermediate coupling layer. If the intermediate coupling layer is optimized, an extinction ratio with more than 20 dB can be obtained. These experimental results are in good agreement with the BPM simulation.

• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.542-553
• /
• 2006

Because Y and C signals in a composite video signal are piled one on another in the same frequency, it is impossible to separate them completely. Therefore, it is necessary to develop efficient separation technique in order to minimize degradation of video quality. In this paper, we propose wavelet-based 3D comb filter algorithm and architecture for separating Y and C signals from a composite video signal. The proposed algorithm uses wavelet transform and thresholding of compared lines for acquiring the maximum video quality. Simulation results show that the proposed algorithm has better image quality and better PSNR than previous algorithms. For real application of the proposed algorithm, we developed a hardware architecture and the architecture was implemented by using VHDL. Finally, a VLSI layout of the proposed architecture was generated by using 0.25 micrometer CMOS process.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.2-17
• /
• 1999

Interpolated second order polynomials(ISOP's) are proposed to design efficient cascaded integrator-comb(CIC)-based decimation filters for a programmable downconverter. It is shown that some simple ISOP's can effectively reduce the passband droop caused by CIC filtering with little degradation in aliasing attenuation. In addition, ISOP's are shown to be useful for simplifying halfband filters that usually follow CIC filtering. As a result, a modified half band filter(MHBF) is introduced which is simpler than conventional halfband filters. The proposed decimation filter for a programmable downconverter is a cascade of a CIC filter, an ISOP, MHBF's and a programmable finite impulse response(FIR) filter. A procedure for designing the decimation filter is developed. In particular, an optimization technique that simultaneously designs the decimation filter is developed. In particular, an optimization technique that simultaneously designs the ISOP and programmable FIR filters is presented. Design examples demonstrate that the proposed method leads to more efficient programmable downconverters than existing ones.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.57-62
• /
• 2023

This paper proposes a tri-band bandpass filter using dual-mode stepped-impedance resonators (SIRs) with parallel coupled structures. The proposed filter adopts U-shaped SIRs with open stubs and parallel coupled lines (PCLs) that have inter-digital and comb-line shorted ends. Two U-shaped SIRs with open stubs build the first and third passband, and the central PCL resonators build the second passband. Five resonators and coupling structures are theoretically analyzed to derive the scattering parameters of the proposed filter. A novel tri-band bandpass filter is designed and fabricated using the induced scattering parameters. The measured result of the fabricated tri-band bandpass filter shows a good agreement with the simulated one.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.387-390
• /
• 1998

We propose comb-line filter using SIR(Stepped Impedance Resonator) with two transmission line. The coupling structure of the filter is double coupled line where two coupled lines are linked with cascade. We find out the inverter function of the filter. using even and odd mode impedance. The merits of the filter are that first, we can design transmission zero point at any frequency that we wanted without using lumped elements : chip capacitors and inductors. Second, we can design small size filters. To validate the inverter function of the filter with double coupled line we designed and fabricated two-pole band pass filter with the proposed filter structure.

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.73-77
• /
• 2018

This paper proposes a dual-band bandpass filter using stepped-impedance resonators (SIRs) with parallel coupled structures. The proposed filter adopts U-shaped SIRs with parallel coupled lines (PCLs) that have interdigital and comb-line shorted ends. The central PCLs build an upper passband and a transmission zero, and the two U-shaped SIRs build a lower passband. Four resonators and coupling structures are theoretically analyzed to derive its scattering parameters. A novel dual-band bandpass filter is designed and fabricated using the induced scattering characteristics. The measured results show that the fabricated dual-band bandpass filter has an insertion loss of less than 1.02 dB in the lower band of 2.45 GHz and of 3.01 dB in the upper band of 3.42 GHz, and a band-to-band isolation of more than 40 dB, from 3.14 to 3.2 GHz.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.264-269
• /
• 2013

In this paper, low-power heart beat detection algorithm and structure is proposed. The proposed detection algorithm utilizes filter banks to display a specific beat per minute(BPM) from the heart beat signals. Since general filter banks need a lot of computation to calculate a BPM, we propose the filter banks structure using modified CIC(Cascaded Integrator Comb) filters. It is shown that the proposed modified CIC filter banks algorithm can display the BPM from the heart beat signals precisely and efficiently.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.3
• /
• pp.28-34
• /
• 2001

To improve the skirt characteristic of the high-temperature superconducting filter, we proposed a structure of cascading two independent hairpin-comb filters with an identical frequency response. Resonators of the cascaded filter are arranged in the shape of a diamond so that it minimizes the cross coupling between the resonators. This structure can be used effectively to improve the skirt characteristic of the filter in limited area of a circular wafer. The simulated skirt characteristic of the 18 pole cascaded filter is more than 40dB/MHz attenuation below and above the passband.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.992-1000
• /
• 2009

Available electric wave resources have been limited than frequency demands that increase with the development of radio communication. According to FCC's (Federal Communication Commission) report, 70% of allocated spectrum was unused. This means that the lack phenomenon of electronic wave resources is ineffectively managed compare with the finiteness of frequency resources. According to the recognition of unused frequency within allocated band, this progress has been investigating to identify the unused TV channel and provide radio communication services. This paper proposed the sensing algorithm that efficiently recognizes the frequency resources which does not use and shares with the licensed user through using the multi-band CIC (Cascaded Integrator Comb) filter based on polyphase filter bank. The simulation results verifies that the proposed scheme can obtain the similar performance of variance and relatively low complexity to the existing scheme.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.32-37
• /
• 2010

The algorithm of multiple channel signal processing requires the flexibility of variable frequency band, efficient allocation of transmission power, and flexible frequency band reallocation to satisfy various service types which requires different transmission rates and frequency band. There are three methods including per-channel approach, multiple tree approach, and block approach performing frequency band reallocation method by channelization and dechannelization in the multiple-channel signal. This paper proposes an improved per-channel approach for converting the frequency band of multiple carrier signals efficiently. The proposed algorithm performs decimation and interpolation using CIC(cascaded integrator comb filter), half-band filter, and FIR filter. In addition, it performs filtering of each sub-channel, and reallocates channel band through FIR low-pass filter in the multiple-channel signal. The computer simulation result shows that the perfect reconstruction of output signal and the flexible frequency band reallocation is performed efficiently by the proposed algorithm.