• Steel and Composite Structures
• /
• 제38권6호
• /
• pp.637-656
• /
• 2021

The component-based method is widely used to analyze the initial stiffness of joint in steel structures. In this study, an analytical component model for determining the column face stiffness of square or rectangular hollow section (SHS/RHS) subjected to tension was established, focusing on endplate connections. Equations for calculating the stiffness of the SHS/RHS column face in bending were derived through regression analysis using numerical results obtained from a finite element model database. Because the presence of bolt holes decreased the bending stiffness of the column face, this effect was calculated using a novel plate-spring-based model through numerical analysis. The developed component model was first applied to predict the bending stiffness of the SHS column face determined through tests. Furthermore, this model was incorporated into the component-based method with other effective components, e.g., bolts under tension, to determine the tensile stiffness of the T-stub connections, which connects the SHS column, and the initial rotational stiffness of the joints. A comparison between the model predictions, test data, and numerical results confirms that the proposed model shows satisfactory accuracy in evaluating the bending stiffness of SHS column faces.

• Geomechanics and Engineering
• /
• 제6권2호
• /
• pp.173-194
• /
• 2014

Laboratory and field data showed that deep mixed (DM) columns accelerated the rate of consolidation of the soft foundations. Most analyses of consolidation of DM column-improved foundations so far have been based on the elastic theory. In reality, the DM columns may yield due to the stress concentration from the soft soil and its limited strength. The influence of column yielding on the degree of consolidation of the soft foundation improved by DM columns has not been well investigated. A three-dimensional mechanically and hydraulically-coupled numerical method was adopted in this study to investigate the degree of consolidation of the DM column foundation considering column yielding. A unit cell model was used, in which the soil was modeled as a linearly elastic material. For a comparison purpose, the DM column was modeled as an elastic or elastic-plastic material. This study examined the aspects of stress transfer, settlement, and degree of consolidation of the foundations without or with the consideration of the yielding of the DM column. A parametric study was conducted to investigate the influence of the column yielding on the stress concentration ratio, settlement, and average degree of consolidation of the DM column foundation. The stress concentration ratio increased and then decreased to reach a constant value with the increase of the column modulus and time. A simplified method was proposed to calculate the maximum stress concentration ratios under undrained and drained conditions considering the column yielding. The simplified method based on a composite foundation concept could conservatively estimate the consolidation settlement. An increase of the column modulus, area replacement ratio, and/or column permeability increased the rate of consolidation.

• Journal of Ginseng Research
• /
• 제8권1호
• /
• pp.32-37
• /
• 1984

In order to shorten the extraction time of saponin in ginseng products, election with Extrelut column and phase-separation methods were compared. The results obtained are as follows. 1. Saponin of ginseng products was extracted completely within 3 hours by election method with Extrelut column, and the rate of removing glucose by the column was increased with increasing glucose content in ginseng products. 2. Stirring method was superior to refluxing method for removing sugars from ginseng products, and removing rate was deceased in the order of lactose, sucrose and glucose. 3. Extraction rate of ginsenoside from ginseng extracts by the elution method was nearly same as that of phase-separation method; however, the former was much higher than the latter in the case of ginseng teas. Therefore, the elution by Extrelut column is to be improper for extraction of saponin in ginseng tea which contains much sugar. It was necessary to remove lipophilic compounds for extraction of saponin from ginseng extracts by elution with Extrelut column.

• Structural Engineering and Mechanics
• /
• 제43권2호
• /
• pp.147-161
• /
• 2012

This paper presents a curvature method for analysis of beam-columns with different materials and arbitrary cross-section shapes and subjected to combined biaxial moments and axial load. Both material and geometric nonlinearities (the p-delta effect in this case) were incorporated. The proposed method considers biaxial curvatures and uniform normal strains of discrete cross-sections of beam-columns as basic unknowns, and seeks for a solution of the column deflection curve that satisfies force equilibrium conditions. A piecewise representation of the beam-column deflection curve is constructed based on the curvatures and angles of rotation of the segmented cross-sections. The resulting bending moments were evaluated based on the deformed column shape and the axial load. The moment curvature relationship and the beam-column deflection calculation are presented in matrix form and the Newton-Raphson method is employed to ensure fast and stable convergence. Comparison with results of analytic solutions and eccentric compression tests of wood beam-columns implies that this method is reliable and effective for beam-columns subjected to eccentric compression load, lateral bracings and complex boundary conditions.

• Journal of Ginseng Research
• /
• 제13권2호
• /
• pp.254-259
• /
• 1989

A radioprotective ginseng protein fraction was obtained from Korean white ginseng powder by the following isolation and purification procedures: Tris-HCI buffer extraction, 70% ammonium sulfate fractionation, CM-rellulosr column chromatography, heat inactivation and Sephadex G-75 column chromatography. This fraction was further purified by Sepharose 4B and Sephadex G-150 column chromatographies. Three fractions obtained were subjected to Native-PAGE and SDS-PAGE using gradient gels and the silver staining method. Molecular weights of the native proteins and their subunits were estimated.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.101-102
• /
• 2017

This study was carried out as basic study to apply to construction site the HPC method which is being developed. The construction cost of HPC method was analyzed in comparison with conventional method (half slab method). With regard to research method, it was decided that data on construction work carried out by half slab method was analyzed. According to the results of study, in case of being applied to the construction work using a divided column, the number of columns was decreased. So, it was shown that member production cost, and transport and assemblage cost reduced. In case of being applied to construction work using an undivided column, the analysis showed that there was little difference in construction cost. Therefore, the analysis showed that, if HPC construction method was applied to large structure using a large column, the construction cost was reduced to some extent in comparison with conventional half slab method.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.133-144
• /
• 2003

공진주 실험은 흙의 전단탄성계수, 재료감쇠비 등을 결정하는 실험으로, 최근 내진해석의 중요성과 더불어 그 사용빈도와 중요성이 증가하고 있다. 공진주 실험은 1960년 이후 널리 활용되어 왔으나, 현재까지의 공진주 실험은 측정장비의 제한성 때문에, 주로 선형스펙트럼 (linear spectrum)의 진폭성분만을 측정하여 왔다. 이는 공진주 실험 시스템의 동적거동을 규명하는 이론에 있어서도 시료의 점성이 고려되지 않았던 것과 동적거동에 대한 이해가 부족했기 때문이기도하다. 최근 조성호 등은 이러한 한계성을 극복할 수 있는 이론적 근거를 제시하였다. 즉, 공진주 실험 시스템의 동적거동에 대한 운동방정식과 그 일반해를 제시함으로써, 이론에 부합하는 공진주 실험의 자료분석 및 해석기법의 기초를 정립하였다. 본 연구에서는 발전된 계측장비와 공진주 실험 시스템의 동적거동에 대한 이론적 모델링을 이용하여 신뢰도가 향상된 공진주 실험의 자료분석 및 해석기법을 제안하였다. 그리고, 유한요소해석에 의한 공진주 실험의 수치실험을 통하여 본 연구에서 제안한 해석기법의 신뢰성과 타당성을 확인하였다. 또한, 주문진 표준사에 대한 공진주 실험을 통하여, 본 연구에서 제안한 자료분석 및 해석방법의 적용성을 확인하였으며, 기존 해석방법과의 비교를 통하여 기존 방법의 한계성과 문제점을 살펴보았다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.291-311
• /
• 2006

The acceleration of consolidation by stone columns was mostly analysed within the framework of a basic unit cell model (i.e. a cylindrical soil body around a column). A method of converting the axisymmetric unit cell into the equivalent plane-strain model would be required for two-dimensional numerical modelling of multi-column field applications. This paper proposes two practical simplified conversion methods to obtain the equivalent plane-strain model of the unit cell, and investigates their applicability to multi-column reinforced ground. In the first conversion method, the soil permeability is matched according to an analytical equation, whereas in the second method, the column width is matched based on the equivalence of column area. The validity of these methods is tested by comparison with the numerical results of unit-cell simulations and with the field data from an embankment case history. The results show that for the case of linear-elastic material modelling, both methods produce reasonably accurate long-term consolidation settlements, whereas for the case of elasto-plastic material modelling, the second method is preferable as the first one gives erroneously lower long-term settlements, where plastic yielding of stone column are ignored.

• 건축역사연구
• /
• 제3권1호
• /
• pp.45-55
• /
• 1994

This study deals with the method of constructing and repairing column, important element of traditional wooden building. Column should have long-lasting strength and resistance to decay and vermin because it is more important in role of structure than in that of ornament. And the rotten or the split part of wooden column should be repaired regularly or irregularly. First of all, this study treats of general character related to the life length and strength of wood. Then it describes the technical method of choosing proper wood for column and that of carpentering, painting, and mending wooden column.

• 분석과학
• /
• 제12권3호
• /
• pp.196-202
• /
• 1999

갈조류인 Sargassum horneri를 중금속 흡착제로 사용하여 중금속 Cd(II) 및 Pb(II)이온을 제거하였다. Sargassum horneri는 동해안에서 채취하였고, 풍건 건조시켜 40~60 mesh의 입자 크기로 흡착제를 만들어 사용하였다. batch법은 진탕 시간에 따른 흡착량을 측정함으로써 흡착속도를 조사하였고, column법은 해조 분말을 충진 시킨후 일정농도의 중금속용액을 1 mL/min의 속도로 흘려보내면서 흡착시키고 흡착량을 알아 보았다. 중금석 흡착에 미치는 pH의 영향은 batch법과 column법 모두, pH 10.5>7.0>3.5순으로 나타났다. Pb(II)이온이 Cd(II)이온보다 높은 흡착량을 보였다. 특히 batch법에서는 모든 pH의 조건하에서 5분이내에 최대 흡착량에 도달하였다. 회수율은 batch법에 의해 흡착된 중금속의 회수율이 column법에 의해 흡착된 중금속의 회수율 보다 조금 높게 나타났다.