• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.4
• /
• pp.144-148
• /
• 2005

In this study, the microwave dielectric properties of $0-6TiTe_3O_8-0.4MgTiO_3$ ceramic with $H_3BO_3$ and SnO were investigated to reduce the sintering time for the LTCC application. According to the X-ray diffraction patterns, both of $0-6TiTe_3O_8-0.4MgTiO_3$ ceramic with $H_3BO_3$ and SnO had the columbite structure of $TiTe_3O_8$ Phase, the ilmenite structure of $MgTiO_3$ phase. The density and dielectric constant of the $0-6TiTe_3O_8-0.4MgTiO_3$ ceramics with $H_3BO_3$ sintered at $830^{\circ}C$ for 1 hour were decreased but the quality factor was not changed with addition of $H_3BO_3$. Also the temperature coefficient of resonant frequency was not changed hardly. In the case of addition of SnO, the density and dielectric constant were increased but the quality factor was decreased and the temperature coefficient of resonant frequency was shifted to the negative(-) direction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.85-85
• /
• 1999

Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT)는 높은 유전율로 인해 강유전체 메모리 소자의 응용을 위한 연구가 되고 있으며 또한 전왜(electrostrictive)성을 갖고 있어 이력현상을 갖지 않음으로 최근 들어 미세전기기계소자(MEMS)로의 연구가 활발히 되고 있다. 본 연구에서는 MEMS 소자로서의 응용을 위해 저응력 SiNx가 형성된 Si 기판위에 Pt 전극 혹은 산화물 전극 SrRuO3를 갖는 PMN-PT 박막 캐패시터를 제조하였다. 박막 하부의 구조는 금속전극의 경우 Pt/Ti/LTO/SiNx/Si이고 산화물전극은 SrRuO3/Ru/SiNx/Si의 구조를 갖는다. PMN-PT 박막은 alkoxide를 기반으로 회전 coating 방법을 사용하여 박막 하부층의 변화를 주어서 성장시켰다. PMN-PT 용액의 합성은 분말합성법에서 사용하는 columbite 방법을 응용하여 상대적으로 반응정도가 낮은 Mg를 Nb와 우선 반응하여 Mg-Nb solution을 얻고 Pb-acetate 용액과 합성하여 PMN을 제조한 후 PT를 반응시켜서 제조하였다. PMN-PT 박막에서 동일한 공정조건 하에서 박막 하부층의 구조에 따라서 PMN-PT 박막의 조성이 A2B2O6의 조성을 가지는 파이로클러어상이 형성되거나 또는 ABO3인 페로브스카이트상이 형성되는 것을 관찰하였다. 금속 전극인 Pt를 하부전극으로 사용한 경우는 혼재상이 형성되어 패로브스카이드 PMN-PT를 얻기 위해 seed layer로서 PbTiO3를 사용하였으며 이러한 seed layer 위에 형성된 PMN-PT를 형성하는 경우 rutile 구조인 RuO2 위에 성장시킨 PMN-PT는 파이로클로어와 페로브스카이트의 혼재상이 얻어졌으나 pseudo-perovskite 구조인 SrRuO3 박막 위에 형성된 PMN-PT 박막에서는 페로브스카이트가 주된 상으로 얻어졌다. 즉 하부층(전극 또는 seed layer)으로 perovskite 구조를 갖는 박막을 형성하게 되면 페로브스카이트를 갖는 PMN-PT 박막을 얻을 수 있었다. 전기적인 특성은 상부전극으로 Pt를 사용하여 HP 4194A로 측정을 하였다. PT seed layer를 포함한 PMN-PT 박막은 유전상수 1086과 유전손실 2.75%을 가졌다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.1
• /
• pp.57-61
• /
• 2005

The microwave dielectric properties of 0.6TiTe$_3$O$_{8}$-0.4MgTiO$_3$ ceramics with H$_3$BO$_3$-SnO were investigated to improve the sintering condition for the LTCC. According to the X-ray diffraction patterns, 0.6TiTe$_3$O$_{8}$-0.4MgTiO$_3$ ceramics with H$_3$BO$_3$-SnO had the columbite structure of TiTe$_3$O$_{8}$ phase and the ilmenite structure of MgTiO$_3$ phase and there were no second phase. Increasing the addition of H$_3$BO$_3$-SnO, the density and dielectric constant of the 0.6TiTe$_3$O$_{8}$-0.4MgTiO$_3$ ceramics were increased but the quality factor was decreased. The temperature coefficient of resonant frequency was shifted to the negative(-) direction with addition of H$_3$BO$_3$-SnO.EX>-SnO.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.407-413
• /
• 2003

The geology of the Apdong Nb-Ta deposit, is hosted by alkali metasomatites, consist of Upper Proterozoic sedimentary rocks, alkali syenites(Hoamsan intrusive) of Phyonggang Complex(late Paleozoic to early Mesozoic), Jurassic granite and Quaternary basalt. Alkali syenites are distinguished as alkali amphibole-pyroxene syenite, alkali amphibole-biotite syenite, biotite-nepheline syenite, biotite syenite, and quartz-alkali amphibole-pyroxene syenite. Alkali metasomatites are the products of intense post-magnatic metasomatism, and form the Nb-Ta ore bodies as the belt, irregular vein and lenticular types in the southern part of Hoamsan intrusive. The ore mineralization is characterized by the occurrence of pyrochlore, zircon, and small amounts of columbite, fergusonite. magnetite, fluorite, molybdenite, ilmenite, titanite, apatite, and monazite. Pyrochlore is one of the niobium/tantalum oxides and contains substantial amounts of rare earths and radioactive elements. The compositional varieties of pyrochlore can be defined: (1) enriched in tantalum, uranium and cerium, (2) substantially tantalum- and fluorine-poor, and (3) enriched in thorium or barium. The geochemical characteristics, ore textures and mineral occurrences indicate that alkali metasomatism of the mineralizing fluid was the dominant ore-forming process.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.114-115
• /
• 2007

In this study, low temperature sintering property of the $0.6TiTe_3O_8-0.4MgTiO_3$ ceramics with sintering adds were investigated for LTCC application which enable to cofiring with Ag electrode. $TiTe_3O_8$ mixed with $MgTiO_3$ to improve the temperature property. In the X-ray diffraction patterns, the columbite structure of $TiTe_3O_3$ phase and ilmenite structure of $MgTiO_3$ phase were coexisted in all specimens. In the case of $H_3BO_3$ addition, the bulk density and dielectric constant were decreased but quality factor was increased with amount of $H_3BO_3$ additions. The TCRF of the $0.6TiTe_3O_8-0.4MgTiO_3+xwt%H_3BO_3$ ceramics were moved to positive direction. In another case, SnO addition, the bulk density and dielectric constant were increased but Quality factor was decreased with amount of SnO additions. The TCRF of the $0.6TiTe_3O_8-0.4MgTiO_3$+ywt%SnO ceramics were shifted to negative direction. The dielectric constant, quality factor and TCRF of the $0.6TiTe_3O_8-0.4MgTiO_3$ ceramics with $2wt%H_3BO_3$ and 2.5wt%SnO sintered at $830^{\circ}C$ for 1h, were 28.5, 39,570GHz, $+9.34ppm/^{\circ}C$ and 29.86, 35,80000z, $-0.58ppm/^{\circ}C$, respectively.

• Applied Science and Convergence Technology
• /
• v.25 no.5
• /
• pp.88-91
• /
• 2016

The $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$+xwt%PbO systems at temperature of $1250^{\circ}C$ for 4 hours was successful synthesized. In this study, PbO-doped $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$ systems with non-linear behaviors showed ordering-degree dependence at the low temperature range were prepared using the columbite precursor method. And the characteristic of remnant polarization vs. electric field were analyzed. The pyroelectric, dielectric and piezoelectric properties of partially disordered $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$+xwt%PbO solid solutions were studied as a function of temperature, frequency, and electric field. It showed distinct features of temperature dependent of pyroelectric coefficient, spontaneous polarization and dielectric constant at about $50^{\circ}C$. The figure of merit was calculated as pyroelectric coefficient, dielectric constant and dissipation factor. It was found that the high voltage responsivity FV, high detectivity FD were $0.0373m^2/C$ and $0.6735{\times}10^{-4}Pa{-1/2}$, respectively, in the $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$+3.0 wt%PbO system.

• Journal of Powder Materials
• /
• v.26 no.5
• /
• pp.405-409
• /
• 2019

Piezoelectric ceramic specimens with the $Pb(Mg_{1/3}Nb_{2/3})_{0.65}Ti_{0.35}O_3$ (PMN-PT) composition are prepared by the solid state reaction method known as the "columbite precursor" method. Moreover, the effects of the $Li_2O-Bi_2O_3$ additive on the microstructure, crystal structure, and piezoelectric properties of sintered PMN-PT ceramic samples are investigated. The addition of $Li_2O-Bi_2O_3$ lowers the sintering temperature from $1,200^{\circ}C$ to $950^{\circ}C$. Moreover, with the addition of >5 wt.% additive, the crystal structure changes from tetragonal to rhombohedral. Notably, the sample with 3 wt.% additive exhibits excellent piezoelectric properties ($d_{33}=596pC/N$ and Kp = 57%) and a sintered density of $7.92g/cm^3$ after sintering at $950^{\circ}C$. In addition, the sample exhibits a curie temperature of $138.6^{\circ}C$ at 1 kHz. Finally, the compatibility of the sample with a Cu electrode is examined, because the energy-dispersive X-ray spectroscopy data indicate the absence of interdiffusion between Cu and the ceramic material.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1190-1196
• /
• 2002

Microwave dielectric properties and multilayer characteristics $(1-x)BiNbO_4-xCaNb_2O_6$ (0${\le}$x${\le}$1.0) ceramics were investigated as a function of $CaNb_2O_6$ content. In the composition range of 0.25${\le}$x${\le}$0.75, the mixture phases of $BiNbO_4$ with stibotantalate structure and $CaNb_2O_6$ with columbite structure were detected and secondary phase or phase transition were not detected. Dielectric constant (K) of $(1-x)BiNbO_4-xCaNb_2O_6$ ceramics was largely dependent on the existing phase and could be estimated by the dielectric mixing rule calculated from maxwell equation. Typically, dielectric constant (K) of 26, quality factor (Qf) of 4300 GHz and Temperature Coefficient of resonant Frequency (TCF) of -18 ppm/${\circ}C$ were obtained for $0.5BiNbO_4-0.5CaNb_2O_6$ specimens with 0.8 wt% $CuV_2O_6$ sintered at 1000${\circ}C$ for 3h. The deviation of X-Y shrinkage and camber value of the multilayers obtained from $0.5BiNbO_4-0.5CaNb_2O_6$ green sheet sintered at 850∼950${\circ}C$ for 20 min. were smaller than those of $BiNbO_4$ multilayers.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.283-298
• /
• 2022

In this study, we investigated the mineral geochemistry of the albite-spodumene pegmatite, associated exogreisen, and wall rock from the Boam Li deposit, Wangpiri, Uljin, Gyeongsangbuk-do, South Korea. The paragenesis of the Boam Li deposit consists of two stages; the magmatic and endogreisen stages. In the magmatic stage, pegmatite dikes mainly composed of spodumene, albite, quartz, and K-feldspar intruded into the Janggun limestone formation. In the following endogreisen stage, the secondary fine-grained albite along with muscovite, apatite, beryl, CGM(columbite group mineral), microlite, and cassiterite were precipitated and partly replaced the magmatic stage minerals. Exogreisen composed of tourmaline, quartz, and muscovite develops along the contact between the pegmatite dike and wall rock. The Cs contents of beryl and muscovite and Ta/(Nb+Ta) ratio of CGM are higher in the endogreisen stage than the magmatic stage, suggesting the involvement of the more evolved melts in the greisenization than in the magmatic stage. Florine-rich and Cl-poor apatite infer that the parental magma is likely derived from metasedimentary rock (S-type granite). P₂O₅ contents of albite in the endogreisen stage are below the detection limit of EDS while those of albite in the magmatic stage are 0.28 wt.% on average. The lower P₂O₅ contents of the former albite can be attributed to apatite and microlite precipitation during the endogreisen stage. Calcium introduced from the adjacent Janggun formation may have induced apatite crystallization. The interaction between the pegmatite and Janggun limestone is consistent with the gradual increase in Ca and other divalent cations and decrease in Al from the core to the rim of tourmaline in the exogreisen.

• Economic and Environmental Geology
• /
• v.47 no.3
• /
• pp.255-263
• /
• 2014

Conflict minerals refer to minerals mined in conditions of armed conflict, especially as in the eastern provinces of the Democratic Republic of the Congo. The common conflict minerals are cassiterite, wolframite, coltan(columbite-tantalite ore), and gold, which are mined and extracted from the Eastern Congo. These minerals are essentially used in the manufacture of a variety of devices, including consumer electronics. To end the violent conflict in the Democratic Republic of the Congo (DRC) and in surrounding countries, it is necessary to block the supply route of conflict minerals which has been partially financed by the exploitation and trade of conflict minerals. The Dodd-Frank Wall Street Reform and Consumer Protection Act, passed into law in July 2010 and it contains requirements that U.S. companies report to the Securities and Exchange Commission(SEC) on the origin of conflict minerals and show due diligence of OECD. The goal of the act is to cut direct and indirect funding of armed groups engaged in conflict.