• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.239-242
• /
• 2000

The color television signal and color receivers should be balanced for the same value of reference white to achieve colorimetric fidelity and to minimize interference. The NTSC signal is balanced for white at 6774 K and most existing receivers are balanced between 6500 K and 10000 K for many reasons. In this paper, we analyze beam current ratio, lightness, and channel gain ratio according to the color temperature for the three-tube projection HDTV. We also propose the brighter reference white for the three-tube projection HDTV based on the Helmholtz-Kohlrausch effect and the optical resolution of the image. In computer simulation we confirmed the most suitable reference white using the proposed analysis method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.188-194
• /
• 2000

Thermochromic liquid crystal reflect a unique color at even temperature. Therefore, they have been successfully applied to non-intrusive heat transfer research. Hue capturing method is widely used in the quantitative measurement from the TLC image. However it is affected by several measurement conditions. The distances of camera and light source have little influence on the color, but the value of hue is seriously affected by the measurement angle. In this study, the hue capturing method is improved by considering the effect of measurement angle. This improved calibration method can diminish the misreading of temperature caused by curvature of test surface.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.1
• /
• pp.1-11
• /
• 2005

The propose of this study investigated the reproduction of color image on a CRT monitor, for a range of different values of monitor gamma. We have used the GOG(gain-offset-gamma) model of the behavior of CRT. Color difference have been computed in a color space, based on the CIELAB color appearance model. The 133 patch defined linearly color sample and 24 patch defined printing color target were used, and were subjected to the influence of nine different gamma value. The result shows that netural color is increasing the decrease range of luminance black color than white color. These results concern correct in the context display of color reproduction.

• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.22-26
• /
• 2013

The author analyzes the luminous efficiency of the phosphor-conversion white light-emitting diode (LED) that consists of a blue LED chip and a yellow phosphor. A theoretical model is derived to find the relation between luminous efficiency (LE) of a white LED, wall-plug efficiency (WPE) of a blue LED chip, and the phosphor absorption ratio of blue light. The presented model enables to obtain the theoretical limit of LE and the lower bound of WPE. When the efficiency model is applied to the measured results of a phosphor-conversion white LED, the limit theoretical value of LE is obtained to be 261 lm/W. In addition, for LE of 88 lm/W at 350 mA, the lower bound of WPE in the blue LED chip is found to be ~34%. The phosphor absorption ratio of blue light was found to have an important role in optimizing the luminous efficiency and colorimetric properties of phosphor-conversion white LEDs.

• Journal of Fashion Business
• /
• v.17 no.5
• /
• pp.45-56
• /
• 2013

This study researches functional arrangements for colors of work clothes - concentrating on the arrangements of lightness - for safety protection of workers at the job sites in the mechanical industry. To conduct such study, blue color (5PB) is selected for the CAD simulations on six arrangements of brightness based on two colors. The brightness ranges are of 5PB color (between 3~7.5) which are measurable by Munsell Conversion, and arrangements on lightness consisting of one arrangement of high lightness-gap, two of medium lightness-gap, and three of low lightness-gap. To analyze the data of color values after applying arrangements of lightness and to evaluate the levels of awareness regarding arrangements, the NCS colorimetric is being applied. Color palettes are based on the NCS notations, and then marked with color triangles. After evaluation, the visibility proves to be high when the arrangements contain high lightness at the top and bottom, and the arrangements with higher lightness-gap show higher effects in safety. Since this study tends to check factors of lightness, the other color factors were limited. Therefore, in order to apply these results at the job sites, integrated applications of such results will be very useful for developing safe working clothes in the future.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.18
• /
• pp.7785-7792
• /
• 2014

Background: Valproic acid (VPA) is a potent anticancer and antiangiogenic agent. However, design and synthesis of chemical derivatives with improved antiangiogenic and anticancer activities are still necessary. In this study a library of novel derivatives of VPA was synthesized and tested. Methods: A human liver cancer cell line (HepG2) and a human normal embryonic kidney cell line (HEK 293) were exposed to various concentrations of VPA derivatives for 24 hours and cell viability was checked by MTT colorimetric assay. Anti-angiogenic properties were evaluated in transgenic zebrafish embryos. Results: N-valproylglycine derivatives suppressed survival almost 70% (p value 0.001) in HepG2 cells but only 10-12% in HEK 293 cells (p value 0.133). They also suppressed angiogenic blood vessel formation by 80% when used between $2-20{\mu}M$ in zebrafish embryos. Valproic acid hydrazides showed moderate level of anticancer activity by affecting 30-50% (p value 0.001) of cell viability in HepG2 cells and 8-10% in HEK293 cells (p value 0.034). Conclusion: The majority of compounds in this study showed potent and stronger antiangiogenic and anticancer activity than VPA. They proved selectively toxic to cancer cells and safer for normal cells. Moreover, these compounds inhibited developmental angiogenesis in zebrafish embryos. Based on the fact that liver is a highly vascularized organ, in case of liver carcinoma these compounds have the potential to target the pathological angiogenesis and could be an effective strategy to treat hepatocellular carcinoma.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2007

Filter colorimeters have a set of spectral bands for which spectral responsivity is the same as the color matching function defined by CIE (Commission Internationale de I'Eclairage). We have designed a set of color matching function filters denoted by $\bar{x}-filter,\;\bar{y}-filter,\;and\;\bar{z}-filter$. Because the $\bar{x}-function$ has two transmission bands, two $\bar{x}-filters$ are designed to cover the $\bar{x}-function$. To design the filters, we developed a nonlinear least square fit program which determines the thickness of the color glasses by minimizing its spectral mismatch value ($f{_1}'$) to below 3 %. The design has been validated by fabrication of the $\bar{y}-bar$ filter, of which $f{_1}'$ was measured to be 2.8 %. Considering a LCD flat panel display as a device under test, we have calculated the systematic error of the colorimetric measurement using the designed filters.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.359-364
• /
• 1995

This experiment was conducted to get the fundamental information about the difference in color and some chemical components of grey flue-cured tobacco cultivated in paddy field to compare with normal tobacco. Cured leaves of NC82 were separated with visual characters into three classes of slight, fair and severe symptoms of grey leaf by percentage of grey parts to whole leaf area, and compared to normal ones. Occurrence of grey leaves tended to be higher in lower stalk position than in upper ones. Cl, Mn and Fe content of grey leaves was much higher when it compared with normal leaves, and within the same leaf, grey parts were increased in Fe, Mn and Cl content than in those of normal parts but there was no appearent difference in total sugar, nicotine and Ca contents. Chemical analysis of grey leaf samples indicated that they contained more Fe, Mn and Cl contents than those of normal leaves. These tendencies in chemical traits were accordance with the degree of grey symptoms. Grey leaves showed remarkably lower b*value and slightly lower L*value than those of normal leaves, while a*value was mostly higher in grey leaves. In general, grey appearence of grey flue-curd tobacco seemed to be from less yellowish color, poorer brightness with more brownish or reddish color.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.10
• /
• pp.1228-1241
• /
• 2011

This research compares the change in berberine content in liquid dye and the color and dye uptake of amur cork tree dyed silk upon thermal degradation treatment. Thermal degradation of amur cork tree extract and liquid dye of standard berberine was carried out at room temperature, $4^{\circ}C$ refrigeration, and $100^{\circ}C$ oven conditions for 0-192 hours. Amur cork tree dyed silk was treated in a $100^{\circ}C$ oven for 0-240 hours. The berberine content in liquid dye was measured by the relative abundance of the berberine peak in the HPLC-MS chromatograms. The color and dye uptake of dyed silk was measured using K/S value and colorimetric data. The berberine content in standard berberine dye was 2.4 times that of the amur cork tree extract. A similar result was observed between the K/S value of standard berberine dyed silk and that of amur cork tree dyed silk. The berberine dyed silk showed the highest dye uptake after 120 hours in a $100^{\circ}C$ oven. This result was similar to the change in a berberine content in liquid dye in a $100^{\circ}C$ oven treatment. The change of the K/S value of amur cork tree dyed silk and berberine content of amur cork tree extract was similar up to 24 hours. The result suggests that there is a direct relationship between the color change of amur cork tree dyed silk and the berberine content in amur cork tree dye.

• Journal of Technologic Dentistry
• /
• v.39 no.3
• /
• pp.145-152
• /
• 2017

Purpose: This study sought to identify changes in the mechanical characteristics and color of zirconia according to different sintering temperatures of the substance. Methods: This study processed some specimens of zirconia into those of $8mm(H){\times}10mm(W){\times}50mm(L){\pm}0.1$ each, and sintered them at $1450{\sim}1600^{\circ}C$ on a $50^{\circ}C-interval$ basis in order to examine how their mechanical characteristics and color are changed. Each specimen sintered using the spectral colorimetric apparatus (Easyshade, VITA, Germany) was observed for each of the color change by sintering temperature. Results: When those specimens were sintered at $1450{\sim}1600^{\circ}C$, they were 0% in absorption ratio and porosity, 20% in shrinkage ratio and $6.10g/cm^3$ in specific gravity. Absorption ration, porosity, shrinkage ratio and specific gravity all didn't vary depending on the sintering temperature. The fracture strength of the specimens was highest or 1037MPa at the sintering temperature of $1550^{\circ}C$ and a little lower or 989MPa at that of $1600^{\circ}C$. No variation in L* value was found depending on the sintering temperature of the specimens, while c* value was highest at that of $1450^{\circ}C$. In addition, h* value was highest when the specimens was sintered at $1550^{\circ}C$. Conclusion: This study could determine how zirconia shows changes in mechanical characteristics and color in accordance with different temperatures of its sintering. It is necessary to supplement the physical data of colored transparent zirconia block which is expected to be widely used in clinical practice.